Cisco AP541N Dual-band Single-radio Access Point Administration ...

1Getting StartedConnecting the Access Point to a PCWhen you log in, the Getting Started page for the access point ConfigurationUtility is displayed, as shown in Figure 4.STEP 4Update the Cisco AP 541N software with the latest version by clicking the SoftwareUpgrade link, as shown in Figure 4.Next, we recommend that you:• Change the password by clicking Change Administrator Password.• Configure the SSID and enable wireless security, by clicking ConfigureWireless Networks (SSIDs).• Enable the wireless radio, by clicking Enable Wireless Radio.• Assign a new static IP address to the access point if your network devicesare configured with static IP addresses, by clicking Set LAN IP Address.!CAUTION If you do not have a DHCP server on your internal network, and do not plan to useone, we recommend assigning a new static IP address so that if you bring upanother WLAN Cisco AP541N on the same network, the IP address for each accesspoint is unique. If the IP address is not unique, a conflict results causingunpredictable results.To change the connection type and assign a static IP address by using the AccessPoint Configuration Utility, see LAN Settings, page 40.17 Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide