complete torches - Rapid Welding and Industrial Supplies Ltd

TIG (GTAW) INVERTER1 50 HZAC>>>> CC>>>>PHASE 60DC>>>>ARCMASTER 200 AC/DC1ph 230V Input, 200A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/DownSlope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance ControlProcess HF TIG LIFT TIG STICKPart Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight10-3099 25% @ 200A40% @ 160A5 - 200 Amps 360 x 180 x 420 mm 17 kgPart No. Description List Price £10-3099 TA 200 AC/DC 200 Amp Inverter Power Source 2839.00with operating manual, primary cable and Tig plug (10-9811)OPTIONS AND ACCESSORIES020212/SA Universal Trolley 350.0010-4016 Remote Foot control 7.6m lead and plug 292.1610-4014 Remote Hand Pendant 7.6m lead and plug 236.5210-9811 Plug for Remote or TIG Torch Button 23.00304.090.404 SA.26.4 TIG Torch 106.93Machine SpecificationsMains Input Voltage 1ph. 230v Open Circuit Voltage 65VProtection Factor IP23S Warranty Period 3 YearsFeaturesSmart Logic ®Thermal Overload Protectionwith indicatorSimple to use Control PanelInterfaceRemote ReceptacleWarning CircuitryVRDLift-Start TIGHF Arc StartingTIG Pulser & SloperCellulose CompatibleParameter memory settings23145BenefitsEliminates damage if the machine is accidentally installed to the improper voltageAlerts operator if duty cycle is exceeded or airflow is blockedAll functions and controls are easily set through robust easy to use push buttonswitchesAllows remote devices to be connected for controlling amperage and outputcontactorAlerts operator of power supply abnormalitiesVRD stands for Voltage Reduction Device, it reduces the OCV when the powersupply is not in use. Eliminates the need for add on voltage reducers. (Field Capable)Provides TIG arc starting without use of high frequencyProvides non-contact arc starting that eliminates tungsten or material contaminationProvides Pulse ON/OFF, Pulse Frequency, peak % time, background and peakamperage, initial and final slope times and amperage controlStable arc characteristics for E6010 Cellulose and low hydrogen electrodesGives memory programmes which can easily be saved and recalled to give job settings tothe operator at the push of a button7 Item Description1 Pulse Function - Pressing this button enables the TIG current pulse functions2 Scroll Buttons - Used to select the parameter to be set. The LED’s showwhich function is being adjusted on the Sequence Graph.3 TIG Mode Functions - Pressing this button scrolls through the output TIGfunction models (Standard, Slope, Slope w/repeat, Spot)4 Digital LED Display - Welding amperage and parameter values are displayedin this window. internal warnings such as over temperature, low or highinput voltage applied are signalled to the operator by a warning sound anderror message on the screen5 Control knob - Allows the operator to adjust the output amperage within theentire range of the power source, also used to set each parameter value6 Process Button - This button selects between STICK, HF TIG or Lift TIG mode6 7 AC/DC Button - Selects between AC or DC welding output- 16 -www.rapidwelding.comWELDING EQUIPMENT