complete torches - Rapid Welding and Industrial Supplies Ltd

MIG (GMA) TIG (GTAW) STICK (SMAW) INVERTER3 50>>>> HZCC/CV DC >>>>PHASE 60300 GMS3ph 400V Input, 300A Digital Mig Inverter in compact design with variablevoltage and inductance control and full waveform set up features withmemory for Mig, Lift Tig & Stick.Process MIG LIFT TIG STICK>>>>Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight10-9407 35% @ 300A 3 - 300 Amps 460 x 279 x 570 mm 25 kg60% @ 260APart No. Description List Price £10-9407 TA 300 GMS Digital Mig Inverter with 1.0/1.2 solid wire drive rolls, 2968.00mains cable & Operating manualOPTIONS AND ACCESSORIES020212/SA Universal Trolley 350.002187 0.6/0.8mm Hard Wire V groove feed roll 35.832189 1.0/1.2mm Hard Wire V groove feed roll 35.832269 1.0/1.2mm Wire U groove feed roll 35.832319 1.0/1.2mm Cored wire drive roll 35.83304.090.407 SA.26.4 4m Euro-kwik connector style TIG torch POR304.090.807 SA.26.8 8m Euro-kwik connector style TIG torch PORTS212X4045EL 3.6m Spitfire 250A MIG Gun 118.67TS215X4045EL 4.5m Spitfire 250A MIG Gun 133.66Machine SpecificationsWire Feed System SpecificationsMains Input Voltage 3ph. 400v Wire Feed Speed Range 1 - 18 m/minArc Voltage Range Variable Wire Drive Type 4 RollProtection Class IP23 Wire Diameter Range Hard Wire 0.6-1.2mmWarranty Period 2 Years Soft Wire 0.8-1.2mmFeaturesThermal Overload protection with IndicatorReverse Polarity FacilitySpot Timer ControlStitch Timer ControlAdjustable Burn Back ControlTrigger Latching FacilityVariable Voltage ControlVariable Inductance ControlDigital signal motor driveMemory StorageF18F19F12F13F17F15F20F21F11F14F16F10F9BenefitsAlerts operator if duty cycle is exceeded or airflow is blockedAllows use of self shielding wires for outdoor applicationsAllows trigger to time out to give uniform tacksAllows operator to set dedicated on/off times to produce uniform short runsGives precise wire burn back for diameter of wire and good re-strikingcapabilityAllows trigger to be released for continuous long weld runsGives precise adjustment of output voltage to give control of heat inputGives inductance adjustment from 0 - 100% for complete control of Arctransfer to improve weld quality and significantly reduce spatterGives precise and consistent wire feeding for full operator controlAllows 25 programmes for full parameter and settings to be saved and easilyset up on the unitwww.rapidwelding.comF3F7F8F4F2F1F6Item DescriptionF1 Setting key for ‘Load’ program F12 Power supply fault indicatorF5 F2 Setting key for ‘Save’ program F13 Water cooling fault indicatorF3 Voltage adjustment knob F14 m/min indicator on ‘10’ displayF4 ’Seconds’ indicator on ‘9’ display F15 TIG welding indicatorF5 Setting key for ‘set up’ program F16 WFS adjustment knobF6 ‘Set up’ program indicator F17 MIG welding indicatorF7 ‘Volt’ indicator on ‘9’ display F18 Setting key for welding modeF8 ‘%’ indicator on ‘9’ display F19 Setting key for 2/4 strokeF9 Digital display F20 MMA welding indicatorF10 Digital display F21 Indicator 4 strokes weldingF11 ‘Amps’ indicator on ‘10’ display- 36 -WELDING EQUIPMENT