complete torches - Rapid Welding and Industrial Supplies Ltd

WELDING EQUIPMENTTIG (GTAW) INVERTER3 50 HZAC>>>> CC>>>>PHASE 60DC>>>>ARCMASTER 300 AC/DC3ph 380/415V Input, 300A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance ControlPROCESS HF TIG LIFT TIG STICKPart Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight10-3098 25% @ 300A 5 - 300 Amps 420 x 210 x 450 mm 24 kg40% @ 250APart No. Description List Price £10-3098 TA 300 AC/DC 300 Amp AC/DC TIG Inverter 5109.00with operating manual, primary cable, TIG plug (10-2096) and cable clamp (10-2097)OPTIONS AND ACCESSORIESCRT.ARCM3.1 ArcMaster 3.1 Workshop Cart 413.50WC.ARCM3.1 ArcMaster Cooler 1058.5010-2007 Remote Foot control 7.6m lead and plug 370.6210-2005 Remote Hand Pendant 7.6m lead and plug 244.1310-2096 14 Pin Plug for Remote or TIG Torch Button 44.8910-2097 Cable Clamp for 14 Pin Plug 7.5210-9997 50mm 2 DINSE TIG Torch adapter 32.92304.090.404 SA.26.4 TIG Torch - air cooled 106.93302.050.404 SA.18.4 TIG Torch - water cooled 133.21Machine SpecificationsMains Input Voltage 3ph. 400v Open Circuit Voltage 65VProtection Factor IP23S Warranty Period 3 YearsFeaturesBenefitsSmart Logic ®Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blockedwith indicatorSimple to use Control Panel All functions and controls are easily set through robust easy to use push button switchesInterfaceRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorWarning CircuitryAlerts operator of power supply abnormalitiesVRDVRD stands for Voltage Reduction Device, it reduces the OCV when the power supply isnot in use. Eliminates the need for add on voltage reducers. (Field Capable)ProgrammableAllowing for 5 welding programmes to be saved for maximum flexibility as standard featuresLift-Start TIGProvides TIG arc starting without use of high frequencyHot StartFor STICK welding - Provides ease of arc startsHF Arc StartingProvides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage,initial and final slope times and amperage controlCellulose Compatible Stable arc characteristics for E6010 Cellulose and low hydrogen electrodesParameter memory settings Gives memory programmes which can easily be saved and recalled to give job settings tothe operator at the push of a button2 19Item Description1 Pulse Function - enables the TIG current pulse functions2 Remote Current Function - enables remote current functions3 TIG Mode Functions - Pressing this button scrolls through the output TIGfunction models (Standard, Slope, Slope w/repeat, Spot)4 Digital LED Display - Welding amperage and parameter values are displayed8in this window. internal warnings such as over temperature, low or highinput voltage applied are signalled to the operator by a warning sound anderror message on the screen5 Save/Load Button - By using the Save & Load buttons the operator can easilysave up to 5 welding parameter programmes6 Control knob - Allows the operator to adjust the output amperage within theentire range of the power source, also used to set each parameter value7 Process Button - This button selects between STICK, or Lift TIG mode3 4 5 6 78 Scroll Buttons - Used to select the parameters to be set. The LED’s showwhich function is being adjusted on the Sequence Graph9 AC/DC Button - Selects between AC or DC welding output- 17 -www.rapidwelding.com