Volume 4 - Loctite.ph

More documents

Recommendations

Info

DisclaimerDisclaimerThe information contained herein is intended to be used solely as an indicator of the bondability of the evaluated plastics. The information is believed tobe accurate, and is well suited for comparative analysis, however, the testing was performed using a limited number of adhesive lots, plastic lots, andreplicates. Consequently, this makes the information contained herein inappropriate for specification purposes.Suggestions concerning the compatibility of plastics with adhesives is based on test data and general knowledge concerning the chemical resistanceof plastics. All thermoplastics have the potential to stress crack when exposed to uncured adhesive depending on the exposure time, part geometry,stresses, and plastic composition variables. Consequently, it is important that the end user evaluate the suitability of the adhesive in their process toinsure that the adhesive does not detrimentally affect the performance of the plastic.Suggestions for surface cleaners to be evaluated are based on test data and general information concerning the chemical resistance of the plastics.The chemical resistance of plastics can be affected by the exposure time, temperature, stress levels, and plastic composition variables. Consequently, itis important that the end user evaluate the suitability of the cleaning solvent in their process to insure that the solvent does not detrimentally affect theperformance of the plastic.Henkel can not assume responsibility for the results obtained by others over whose methods we have no control. It is the user's responsibility todetermine suitability for the user’s purpose of any production method mentioned herein and to adopt such precautions as may be advisable for theprotection of property and of persons against any hazards that may be involved in the handling and use thereof.In light of the foregoing, Henkel Corporation specifically disclaims all warranties of merchantability or fitness for a particular purpose arisingfrom sale or use of Henkel Corporation’s products. Henkel Corporation specifically disclaims any liability for consequential or incidentaldamages of any kind, including lost profits. The discussion herein of various process or compositions is not to be interpreted as representation thatthey are free from domination of patents owned by others or as a license under any Henkel Corporation patents which may cover such processes orcompositions. We recommend that each prospective user test the proposed application in its manufacturing process using this data as a guide. Thisproduct may be covered by one or more United States or foreign patents or patent applications.96The Loctite ® Design Guide for Bonding Plastics, Volume 4
For more information, please call 1-800-LOCTITE (562-8483) inthe U.S.; 1-800-263-5043 in Canada; 01-800-901-8100 in MexicoHenkel CorporationEngineering Adhesives1001 Trout Brook Crossing, Rocky Hill, CT 06067 U.S.A.800-562-8483 • www.henkel.us • www.loctite.comLoctite, Black Max, Depend, Fixmaster, Flashcure, Hysol, Prism, PST, Quick Metal, Speedbonder, Super Bonder, Tak Pak, 222MS, 242, 262, 277, 290, 324, 326,330, 334, 366, 380, 382, 401, 403, 405, 409, 410, 411, 414, 420, 422, 496, 592, 593, 609, 620, 635, 640, 660, 675, 770, 1942, 3030, 3105, 3106, 3311, 3340, 3631,3651, 4011, 4203, 4211, 4305, 4307, 4471, 5140, 5699, 5900, 7701, 7804, E-00CL, E-20HP, E-30CL, E-60HP, E-90FL, E-214HP, H3000, H4500, M-21HP, M-31CL,U-04FL, and U-05FL are trademarks of Henkel Corporation, U.S.A. All other trademarks are the property of the respective owner.© Henkel Corporation, 2006. All rights reserved. 3563 / LT-2197 4/2006
Page 3:
Table of ContentsIntroduction 2How
Page 6 and 7:
How To Use The Plastic Bonding Guid
Page 8 and 9:
Cyanoacrylate AdhesivesGeneral Desc
Page 10 and 11:
Hot Melt AdhesivesGeneral Descripti
Page 12 and 13:
Polyurethane AdhesivesGeneral Descr
Page 14 and 15:
No-Mix and Static Mix Acrylic Adhes
Page 16:
Acetal HomopolymerThermoplasticTrad
Page 20:
Acrylic-Styrene-Acrylonitrile (ASA)
Page 23 and 24:
ADHESIVE SHEAR STRENGTH(psi)(MPa)Ac
Page 25 and 26:
ADHESIVE SHEAR STRENGTH(psi)(MPa)Di
Page 27 and 28:
ADHESIVE SHEAR STRENGTH(psi)(MPa)Ce
Page 29 and 30:
ADHESIVE SHEAR STRENGTH(psi)(MPa)Ep
Page 31 and 32:
ADHESIVE SHEAR STRENGTH(psi)(MPa)Po
Page 33 and 34:
ADHESIVE SHEAR STRENGTH(psi)(MPa)Io
Page 35 and 36:
ADHESIVE SHEAR STRENGTH(psi)(MPa)Li
Page 37 and 38:
ADHESIVE SHEAR STRENGTH(psi)(MPa)Ph
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48: ADHESIVE SHEAR STRENGTH(psi)(MPa)Po
Page 53 and 54: ADHESIVE SHEAR STRENGTH(psi)(MPa)Lo
Page 73 and 74: ADHESIVE SHEAR STRENGTH(psi)(MPa)St
Page 75 and 76: ADHESIVE SHEAR STRENGTH(psi)(MPa)Vi
Page 77 and 78: Surface TreatmentsAdhesive Abrading
Page 79 and 80: Adhesive Joint DesignIntroductionIn
Page 81 and 82: TitleDesign GuidelinesEngineers mus
Page 83 and 84: Shortening bond overlaps reduces bo
Page 85 and 86: Softening and weakening of the surf
Page 87 and 88: Determining The Test MethodThe lap
Page 89 and 90: Block Shear Test Method1. Assemblie
Page 91 and 92: ViscosityViscosity is a product pro
Page 93 and 94: Index of Trade NamesTrade Name Plas
Page 95 and 96: Trade Name Plastic Type Manufacture
Page 97: AcknowledgmentsThis manual would no
show all

Volume 4 - Loctite.ph

Create successful ePaper yourself

Delete template?

Save as template?