Fitting MENU with the iP5 programmer - Widex for professionals

More documents

Recommendations

Info

Turn the iP5 programmer on by pressing the OnR or On L key. If the connected hearing aid hasnot been fitted before, the iP5 programmer automaticallystarts up in Preconditions mode.Display informationThe iP5 programmer has two displays: a maindisplay and a menu display. The displays showthe following information (see fig. 2):If you change any fitting or fine-tuning parameterswith the iP5 programmer, an hourglasssymbol will appear in the main display. This indicatesthat the iP5 programmer is busy sendingdata to the hearing aid. The data transmissionlasts a few seconds during which time the keyson the programmer are inactive and the hearingaid is muted briefly. Once the hourglass is turnedoff, you can continue the fitting and fine-tuningprocess. This routine ensures that parameter settingsdisplayed on the iP5 programmer are alwaysidentical to the settings in the hearing aid.1. Main field. Specifies hearing aid type and themode name or description.2. Extra information field. Indicates, for example,if the feedback result is OK for minimumacceptable gain for speech.3. Value field. The content is mode-sensitive.4. Information field. The content is mode-sensitive.Displays information such as frequencyor program.5. Menu display. Displays the current functionof the menu keys.10
6. Battery indicator. Blinks when the batteriesneed changing.7. Feedback test indicator. Blinks if a new feedbacktest is required.8. Hourglass. When the hourglass is displayed,the iP5 programmer is “busy”; pressing thekeys will therefore have no effect.15622783 3 334 4 4 4Fig. 2 The iP5 programmer displays.11
Page 1: Fittinghearing aidsbased on theFlex
Page 4 and 5: The iP5programmerThe iP5 programmer
Page 6 and 7: Overview of the iP5 fitting flowPre
Page 8 and 9: Control panelA. On R key. Activates
Page 12 and 13: Connectingthe selectedhearing aidTo
Page 14 and 15: Monaural/Binaural (M-B)Press the ar
Page 16 and 17: FittingSensogramThe next step in th
Page 18 and 19: Air-bone gap (ABG)If you are fittin
Page 20 and 21: Fitting completeThe first fitting o
Page 22 and 23: LoudnessPress the menu key next to
Page 24 and 25: Occlusion managerPress the menu key
Page 26 and 27: Program selectionBy default, MENU s
Page 28 and 29: Program Description ConfigurationMa
Page 30 and 31: RC4 matchingIf the hearing aid is p
Page 32 and 33: When the three codes have been ente
Page 34 and 35: Program gain offsetPress the menu k
Page 36 and 37: Feedback CancellingTo change the fe
Page 38 and 39: Test ModeMENU hearing aids can be p
Page 40 and 41: Updating the PROMWe advise you to c
Page 42: REFRSETS-BSPNHSTDTTVVNTW1W2W3Refere

Fitting MENU with the iP5 programmer - Widex for professionals

Create successful ePaper yourself

Delete template?

Save as template?