Fitting MENU with the iP5 programmer - Widex for professionals

More documents

Recommendations

Info

FittingSensogramThe next step in the MENU fitting procedure isthe Sensogram. Press the menu key next to“MODE” to access Sensogram mode. The hearingaid that is being fitted is muted in Sensogrammode. The hearing aid not currently being fittedis also muted. You can, however, turn it on byusing the binaural listening function. To activatethe listening function, press the other “On” key.For example if you wish to listen in with the lefthearing aid while the right hearing aid is beingfitted, press On L. The message “Mic ON Left” isbriefly displayed and the small diode next to theOn L key starts blinking. This function allows youto provide instructions regarding the Sensogram.To turn off the binaural listening functionfor the left hearing aid, press the On R key(i.e. the “On” key of the hearing aid you are fitting).The message “Mic OFF Left” is brieflydisplayed, and the small diode stops blinking.The binaural listening function should always bedisabled during the actual measurement ofSensogram thresholds and while performing thefeedback test.Ensure quiet surroundings. First, measure thebasic Sensogram using the ascending or descendingmethod, for the frequencies 500, 1000,2000 and 4000 Hz. Use the arrow keys to adjustthe tone level and press the tone key to activatethe tone.16
After having measured the basic Sensogram,you can go to the expanded Sensogram bypressing the menu key next to “EXP”. The expandedSensogram is measured in the sameway as the basic Sensogram. Press the menukey next to ==> repeatedly to get access to allthe frequencies available in the expanded Sensogrammode.ME5-9-cf SENSOGRAM2030 40 50500 1000 2000 4000MODEEXPABGFig. 5 After the basic Sensogram thresholds have beenmeasured, you can go to the expanded Sensogram bypressing the menu key next to “EXP”. ABG lets you entera possible air-bone gap.To reset the hearing aid to the basic Sensogramvalues, first press the menu key next to “BACK”,then the key next to “RSET” and finally the keynext to “YES”.17
Page 1: Fittinghearing aidsbased on theFlex
Page 4 and 5: The iP5programmerThe iP5 programmer
Page 6 and 7: Overview of the iP5 fitting flowPre
Page 8 and 9: Control panelA. On R key. Activates
Page 10 and 11: Turn the iP5 programmer on by press
Page 12 and 13: Connectingthe selectedhearing aidTo
Page 14 and 15: Monaural/Binaural (M-B)Press the ar
Page 18 and 19: Air-bone gap (ABG)If you are fittin
Page 20 and 21: Fitting completeThe first fitting o
Page 22 and 23: LoudnessPress the menu key next to
Page 24 and 25: Occlusion managerPress the menu key
Page 26 and 27: Program selectionBy default, MENU s
Page 28 and 29: Program Description ConfigurationMa
Page 30 and 31: RC4 matchingIf the hearing aid is p
Page 32 and 33: When the three codes have been ente
Page 34 and 35: Program gain offsetPress the menu k
Page 36 and 37: Feedback CancellingTo change the fe
Page 38 and 39: Test ModeMENU hearing aids can be p
Page 40 and 41: Updating the PROMWe advise you to c
Page 42: REFRSETS-BSPNHSTDTTVVNTW1W2W3Refere

Fitting MENU with the iP5 programmer - Widex for professionals

Create successful ePaper yourself

Delete template?

Save as template?