Pressure Piping Construction Requirements QMS MANUAL ... - ABSA

Pressure Piping Construction RequirementsQMS MANUAL & AUDIT CHECKLIST AB-518(b)Electronic completion of this document is preferredthe owner s inspector assigned to the job by the owner is informed priorto the start of the project for the purpose of reviewing ITP (and/or aConstruction Travel Sheet), for construction documents and forassignment of inspection hold points?Yes; NoAB-518b 2014-01up to date and approved (by the QC manager) drawing(s) is/are availablefor the construction. When no design drawings or spool drawings aresupplied by the owner and the spool drawings are prepared by thecontractor, documented approval shall be obtained from the owner toensure that the design, material, fabrication, NDE, PWHT, hydrotest andany other requirements are specified?Yes; Nothe materials are available, issued for construction and checked forconformance with the engineering design prior to start of fabrication?Yes; Nowelding and other fabrication activities are monitored and documentedduring production?Yes; Nothe WPS specified in the engineering design are suitable for the job.When no WPS are specified by the designer, is the process for assigningthe WPS in coordination with the owner specified?Yes; Nocopies of the registered WPS are available to the welders, and areunderstood and implemented effectively.Yes; Nothe welders are qualified for the job and records of the welders aremaintained?the inspection and examination stages are identified, carried out inaccordance with the acceptance standards, documented, verified andrecords maintained?YesYes; No; NoPage 15 of 25