Pressure Piping Construction Requirements QMS MANUAL ... - ABSA

More documents

Recommendations

Info

Pressure Piping Construction RequirementsQMS MANUAL & AUDIT CHECKLIST AB-518(b)Electronic completion of this document is preferredthe process for defining the extent of NDE, identification of spools, supplyof NDE instructions to the NDE company, review of radiographs andreports and acceptance is defined and documentation maintained?Yes; NoAB-518b 2014-01for ASME B31.1 Boiler External piping, ABSA inspection and certificationis achieved?N/A ; Yes ; Nothe PWHT is completed in accordance with the requirements of theengineering design, verified and documented?N/A ; Yes ; Nothe pressure testing is accomplished in accordance with requirements ofthe engineering design and codes, and documented?Yes; Nothe completed job is certified using an AB-83 Form, a copy is supplied tothe owner and records maintained. When a job partially meets therequirements of the SCA, Regulations and applicable ASME B31 code(s)a partial AB-83 Form shall be completed and provided to the primarycontractor?Yes; Nowhen specified by the contract, and, when the piping system wasoriginally registered with ABSA, an AB-81 Form is completed uponinstallation and prior to the operation and submitted to ABSA?Reviewer s Comments:Yes; NoPage 16 of 25
3.3.11Post Weld Heat Treatment (PWHT)Pressure Piping Construction RequirementsQMS MANUAL & AUDIT CHECKLIST AB-518(b)Electronic completion of this document is preferredAB-518b 2014-01Has the manufacturer:assigned responsibilities for the implementation and maintenance of thePWHT procedures?Yes; Noverified that the PWHT requirements are defined in the engineeringdesign/drawings or otherwise made available by the owner?Yes; Noensured that the PWHT activities are executed in accordance with therequirements of the engineering design?Yes; Noensured that the piping spools designated for PWHT are identified? Yes ; Noensured that the PWHT instructions for the piping are prepared andsupplied to the heat treatment contractor?Yes; Noensured that upon completion of the PWHT of the piping, it is inspectedand the documentation verified?Yes; Nomaintained PWHT documentation? Yes ; NoReviewer s Comments:Page 17 of 25
Page 1: Pressure Relief Devices Requirement
Page 6 and 7: Pressure Piping Construction Requir
Page 10 and 11: 3.3.8Piping DesignPressure Piping C
Page 18 and 19: 3.3.12Nondestructive Examinations a
Page 24 and 25: 3.3.18Internal AuditsPressure Pipin

Pressure Piping Construction Requirements QMS MANUAL ... - ABSA

Create successful ePaper yourself

Delete template?

Save as template?