Direction for U&M - Autorotor Srl

PARALLEL AXISINTERMITTENT /OSCILLATING DRIVESTRANSLATION OFMANUAL FOR USE ANDWARNINGS10/2012

AUTOROTOR S.r.L.Via dell’Industria, 426010 – Vaiano Cremasco (CR)TRANSLATION OF MANUALFOR USE AND WARNINGSThe purchase concerning this document is subject to the General SalesConditions of Sales available in our website http://www.autorotorgroup.comPRODUCT NAMESERIAL N°CALIBRATIONParallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 3

CONTENTSPAGE1. MACHINE DESCRIPTION2. FORESEEN AND UNFORESEEN USE2.1. Table fixing2.2. Features of the tooling plate to be connected to the indexer.2.3. Risk of crushing, trapping, cutting, friction; and that pieces are projected dueto the tooling plate and to the parts/equipment moved by the table.2.3.1. Motor stop in dwell position2.3.2. Motor stop due to power failure2.3.3. Emergency stop3. EMERGENCY STOP TIME CALCULATION4. HANDLING AND TRANSPORTATION5. ASSEMBLY AND INSTALLATION5.1. Motion transmission to the unit5.2. Backlash on transmission6. PUTTING INTO OPERATION7. LUBRIFICATION8. MAJOR OVERHAULING8.1. Spare parts9. DISPOSAL OF HARMFUL SUBSTANCES AND DISMANTLING10. NOISE PRODUCED BY THE TABLE11. REFERENCE REGULATION FRAMEWORK12. TECHNICAL DATA SHEETS12.1. AP/OP4012.2. AP/OP5512.3. AP70, AP85, AP110, AP13512.4. OP70, OP85, OP110, OP13512.5. AP165, AP200, AP25012.6. OP165, OP200, OP25013. DECLARATION OF INCORPORATION FOR PARTLY COMPLETED MACHINERY(ANNEX II 1.B)555666667899101010101010101113131415161718194Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings

1 MACHINE DESCRIPTIONThe parallel axis intermittent drive (AP) is a mechanical device that sets the output shaft intointermittent motion. It can be motor driven.The parallel axis oscillating drive (OP) is a mechanical device that sets the output shaft intooscillating motion. It can be motor driven.The AP/OP are parallel axis mechanical units which transform the uniform rotation of the inletshaft into an intermittent/oscillating rotation of the output shaft by means of a cam and camfollowers. The cam profile determines the indexer’s transfer and dwell cycle.They are generally framed into another machine.2 FORESEEN AND UNFORESEEN USEThe rotary index table has been designed to set in motion equipment ( conceived anddeveloped by the customer, who is reliable for it), with mass, speed, movement law, system’srigidity, axial load, side load, torque within the limits set by the specifications shown in thetechnical data sheets (see from page 11).Should the indexer be used with higher loads than the ones mentioned in customer’s order, adefective working may result, along with a premature wear of the system. Said operatingconditions can be anomalous also from the point of view of operator’s safety.A dynamic shock during the deceleration phase hints at a load exceeding the one expectedwhen designing. The customer must carefully plan the overall safety conditions of the machinedesigned to frame the rotary index table Autorotor and must take into account the specificfeatures of the indexer itself.2.1 AP /OP indexer’s casing fixingThe AP/OP casing is machined on four sides, to allow mounting in several position.The parallel axis intermittent / oscillating drive must be suitably anchored and supportedaccording to their own weight and to the loads applied (see Pict.2 and table 3).pict. 2 Lifting up and fastening holesParallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 5

As the remaining life of the parallel axis intermittent / oscillating drive is reduced by the stressof a dynamic shock, the useof emergency stop as anordinary cycle stop isforbidden.A torque limiter betweenAP/OP and reducer, limiterwhich under emergency stopconditions allows the motionto be continued and thekinetic energy accumulatedABto dissipate, reduces theeffect of the dynamic shockon the mechanical parts.The emergency stop doesnot cause the motion toCDcome immediately to astandstill; in fact the outputdisk is likely to rotate, afterthe stop, for an angle, whichdepends on the initial massinertia of the system and onthe instant when theemergency stop occurs.The torque limiter mustbe checked every nowand then to check thatthe original setting figureis kept.In case it wasn’t, it has tobe set to the pristine value.EGpict. 4 Power drive unit assembling positionFH3 EMERGENCY STOP TIME CALCULATIONThe emergency stop time can be calculated from the balance between the braking action andthe kinetic energy related to the table and motor inertia (passive phenomena are not takeninto account).• Maximum kinetic energy with respect to the motor shaft,21 ⎛ 2 2π⎞brought about by the inertia of the rotating masses Ek= ⋅ Jt ⋅⎜ω⋅ ⋅ ⎟max imapplied to the table output shaft or disk:2 ⎝ i S ⋅ β ⎠Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 7

• Motor kinetic12energyEk= ⋅ Jm ⋅ ωmotm2• Energy dissipated 1by the brake Ef= ⋅ Mf ⋅ωm⋅ tf2It is therefore possible to calculate thebraking time and the slipping angle:2⎛ ⎡ ⎛ ⎞ ⎤⎜2 2π⎞ωm⋅ ⎢Jm+ Jt ⋅ ⎜ ⋅ ⎟ ⎥ ⎟⎜⎝ i S ⋅⎣⎢β ⎠⎦⎥ ⎟tf= ⎜+ t ⎟i⋅ K⎜Mf⎟⎜⎟⎝⎠α = ω ⋅tfmfCaption:Mf braking torque [Nm]Jt moment of inertia on the outputshaft/disk [Kgm 2 ],ω i input shaft angular speed [rad/s],S number of stations,β displacement angle [rad],i gearbox reduction ratio,ω m motor shaft angular speed [rad/s],Jm inertia of the motor [Kgm 2 ]t f breaking time [s]α f slipping angle [rad]t i turn-on time of the brake [s]K safety factor (1.5 ÷ 2)Check periodically the motor braking system efficiency.4 HANDLING AND TRASPORTATIONSince AP/OP40, AP/OP55 and AP/OP70 weigh less than 25 Kg., they can be lifted manually.The powered versions and the types weighing more must be lifted by means of lifting eyeboltsto be locked in the suitable holes (pict. 2, pict. 14, and table 3) in accordance with what statedby UNI ISO 3266 regulation.pict. 14 Lifting up through lifting eyebolts8Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings

weight fasteninglifting treboltsKg screwAP/OP40M5X8AP/OP55 5 M6x12AP/OP70 8 M6x12AP/OP85 27 M8X15 2 TIPO 1 UNI ISO 3266 M8X15 (sollevamentoinclinato)AP/OP110 47 M10X20 2 TIPO 1 UNI ISO 3266 M10X20 (sollevamentoinclinato)AP/OP135 92 M12X25 2 TIPO 1 UNI ISO 3266 M12X25 (sollevamentoinclinato)AP/OP165 150 M14X25 2 TIPO 1 UNI ISO 3266 M14X25 (sollevamentoinclinato)AP/OP200 275 M16X30 2 TIPO 1 UNI ISO 3266 M16X30 (sollevamentoinclinato)AP/OP250 480 M18X35 2 TIPO 1 UNI ISO 3266 M18X35 (sollevamentoinclinato)table 3: weight, fastening and lifting5 ASSEMBLY AND INSTALLATIONThe parallel axis intermittent / oscillating drive must be only installed in one of the positionsindicated in pict. 3, that is on fastening supports suitably designed so as to bear the load andto absorb vibrations and noise. The fastening must be performed through screws the type ofwhich is described in table 3.What applied (equipment, tooling, etc.) to the AP/OP output shaft must be designed andmanufactured according to the technical features of the indexer and must fulfil the minimumsafety and health requirements stated in the machines guideline.To be transported, the table must be crated with the reducer mounted along its side. If thedesired operating position is different, you must unscrew the gear box’s adaptation flange tothe table (be careful of not shacking the motoreducer), rotate the reducer to the desiredposition and then rescrew the flange to the AP/OP casing. See the table’s serial number on thefirst page of this handbook to learn the electrical data.5.1 Motion transmisson of the unitShould the rotary index table be supplied without gearbox and motor, to have it run well youmust• consider the output torque of the reducer with reference to the data declared by thesupplier. It must be less by• 35% for cam angles ranging from 180° to 330°• 65% for cam angles ranging from 90° to 150°• check the maximum torque• be sure of reduced backlash between the screws and the gear of the reducer• consider a further reduction factor of the useful torque (K=1.3) for transmissionthrough chains, joints, pulleys, bevel gears etc.• pinions and pulleys must have the largest possible pitch diameter compatible withthe overall needed dimensions; chains and belts must be inextensible, joints mustbe free of backlash.As a consequence of what written above on the dynamic shock in case of stop during thetable’s displacement time, it is highly recommended to use a torque limiter, to avoid stresseswhich can bend and break the cam followers’ pin.The torque limiter is to be set at a torque value no more than 15% higher than the normallyused torque.Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 9

5.2 Backlash on transmissionThe transmissions rigidity is crucial to the good operating of the table. Check that there are noslacks between motor shaft and cam holder shaft. If any, by taking them away the pristineefficiency of the table is regained.6 PUTTING INTO OPERATIONBefore putting the parallel axis intermittent / oscillating drive into operation you must:• clean it carefully, by taking away dust and any foreign and smudging substance• clear the rust inhibitor from the parts that are not painted• adjust the position and operating of the position sensing device, if it is there, whichstops the motor during the dwell position of the AP/OPcheck the right working of all protection and safety systems of the machine whichincorporates the rotary index table7 LUBRIFICATIONAutorotor units are lubricated with longlife grease. Accessories, too, (reducers, speedvariators, etc.) are adequately lubricated when supplied already assembled on the units.The grease quantity in each unit depends on the operating position (pict. 3) and is shown intable 5.The lubricant quantity is checked through the level plugs. If you need any detail on lubricantquantities to be used in operating positions different from those as yet reported, please call theAutorotor Technical Dept.Only for units operating at over 150 cycles/minute it is recommended a check on lubricantlevel every 2000 hours and lubricant replacement every 4000 hours.8 MAJOR OVERHAULINGMajor overhauling is carried out at Autorotor workshop; please call after-sale service.8.1 Spare partsIn case of order for spare parts, please let us know the unit type and serial number (they areshown in the table plate) and the spare part number (see technical data sheets).9 DISPOSAL OF HARMFUL SUBSTANCES AND DISMANTLINGThe indexer does not release any oil or grease in the environment. Should it be dismantled,lubricants must be disposed of in accordance with the laws currently in force.10 NOISE PRODUCED BY THE INDEXERThe weighed steady sound pressure level of the parallel axis intermittent / oscillating drive isless than 70 db (a).10Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings

11 REFERENCE REGULATION FRAMEWORK Leg.D. 81/2008 Regulations for safety at work. DPR 303/56 General industrial hygiene regulations. Leg.D. 493/96 Safety signs at work. DPR 802/82 Application of the guideline 181/80 unità di misura. Leg.D. 25/2001 Liability for a defective product. EC GUIDELINE 2006/42 Machines guideline and supplements to it. SPECIFICATION EN ISO 12100-1:2005 Safety of the machines- general design principles,first section: terminology and methods. SPECIFICATION EN ISO 12100-2:2005 Safety of the machines- general design principles,second section: specifications andtechnical principlesAPOPStations number 1 2 3 4 6 8Cam follower’snumber6 8 6 8 6 8 2table 4: number of cam followers (S) depending on the stations number (standardconfigurations).Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 11

TYPE LUBRICANT Q.TY ( L )7 3 SAP 400,2055/AP 0,30AP 700,40AP 851,00AP 110 2,00AP 1352,50AP 1655,00AP 2009,0AP 25014,00A.C.00PET E XOP 400,30OP 550,4070IOP 0,50OP 851,10OP 110 2,20OP 1352,70165IOP 5,20OP 2009,20OP 25014,30LLOLR OEquivalent lubricants:AGIP GR SLLBP ENER GREASE FG00EPESSO BEACON EPOSHELL SUPER GREASE EP0 TIVELACOMPOUNDtable 5: lubrificationN.B.: for tables that relate to food or pharmaceutical applications in the field (ifknown) is used lubricant Q8 ROSSINI EP 0012Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings

12 TECHNICAL DATA SHEETS12.1 AP/OP40Ref. Part name Qty.1 CASING 12 INPUT SHAFT 13 OUTPUT SHAFT 14 CAM 25 ECCENTRIC BUSH 17013 26 PIN S7 CAM FOLLOWER S8 DOUBLE BEARING RAX715 49 WASHER CP21528 410 HEXAGONAL HEAD SCREW M4X20 411 PARALLEL PIN 5X20 212 SEAL ET 1521 413 OIL PLUG ¼” 114 OIL PLUG ¼” 115 HEXAGONAL SOCKET SCREW UNI5931 M5X45 6For S value see table 4 – page 11Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 13

12.2 AP/OP 55Ref. Part name Qty.1 CASING 12 INPUT SHAFT 13 OUTPUT SHAFT 14 CAM 25 ECCENTRIC BUSH 17013 26 PIN S7 CAM FOLLOWER S8 DOUBLE BEARING RAX715 49 WASHER CP21528 410 HEXAGONAL HEAD SCREW M4X20 411 PARALLEL PIN 5X20 212 SEAL ET 2026 413 OIL PLUG ¼” 114 OIL PLUG ¼” 115 HEXAGONAL SOCKET SCREW UNI5931 M5X45 6For S value see table 4 – page 11.14Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings

12.4 OP70, OP85, OP110, OP135Ref. OP70 OP85 OP110 OP135 Qty.1 CASING 12 INPUT SHAFT 13 OUTPUT SHAFT 14 CAM 25 ECCENTRIC FLANGE 02690 02692 02695 02698 46 PIN 27 CAM FOLLOWER 28 BEARING 32005X 320/32X 32009X 32012X 49 WASHER 131235 131236 131237 131238 210 HEXAGONAL HEAD SCREW M5X30 M6X35 M8X50 M10X60 411 PARALLEL PIN 6X25 8X36 10X6X50 12X60 212 SEAL A25407 A32477 A45658 A60808 413 OIL PLUG ¼” ¼” ³/ 8 ” ³/ 8 ” 114 OIL PLUG ¼” ¼” ³/ 8 ” ³/ 8 ” 115 HEXAGONAL SOCKET SCREW M8X70 M10X85 M12X100 M16X130 6UNI593116 HEXAGONAL SOCKET SCREW M4X10 M5X16 M6X16 M8X15 24UNI593117 SPACER 131215 131216 131217 131220 2For S value see table 4 – page 11.16Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings

12.5 AP165, AP200, AP250Ref. AP165 Qty. AP200 Qty. AP250 Qty.1 CASING 1 1 12 INPUT SHAFT 1 1 13 OUTPUT SHAFT 1 1 14 CAM 2 2 25 ECCENTRIC FLANGE 02756 2 02801 2 02798 26 PIN S S S7 CAM FOLLOWER S S S8 BEARING 32019X 2 32024X 2 32030X 29 WASHER 131277 2 133337 2 133334 210 HEXAGONAL HEAD M10X35 8 M10X35 8 M14X45 12SCREW11 PARALLEL PIN 12X70 2 12X80 2 14X90 212 SEAL 95X125X12 2 120X150X12 2 150X180X12 213 OIL PLUG ½ 1 ½ 1 ½ 114 OIL PLUG ½ 1 ½ 1 ½ 115 HEXAGONAL SOCKET M16X120 6 M16X120 6 M20X1600 6SCREW UNI593116 HEXAGONAL SOCKET M6X20 24 M6X20 24 M8X25 32SCREW UNI593117 SPACER 131264 2 133336 2 133333 218 BEARING 32014X 2 32016X 2 32022X 219 FLANGE 02755 2 02802 2 02797 220 SEAL 70X90X10 2 80X110X10 2 110X130X12 2For S value see table 4 – page 11.Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 17

12.6 OP165, OP200, OP250Ref. OP165 Qty. OP200 Qty. OP250 Qty.1 CASING 1 1 12 INPUT SHAFT 1 1 13 OUTPUT SHAFT 1 1 14 CAM 2 2 25 ECCENTRIC FLANGE 02756 2 02801 2 02798 26 PIN 2 2 27 CAM FOLLOWER 2 2 28 BEARING 32019X 2 32024X 2 32030X 29 WASHER 131277 2 133337 2 133334 210 HEXAGONAL HEAD SCREW M10X35 8 M10X35 8 M14X45 1211 PARALLEL PIN 12X70 2 12X80 2 14X90 212 SEAL 95X125X12 2 120X150X1 2 150X180X1 22213 OIL PLUG ½ 1 ½ 1 ½ 114 OIL PLUG ½ 1 ½ 1 ½ 115 HEXAGONAL SOCKET SCREW M16X120 6 M16X120 6 M20X1600 6UNI593116 HEXAGONAL SOCKET SCREW M6X20 24 M6X20 24 M8X25 32UNI593117 SPACER 131264 2 133336 2 133333 218 BEARING 32014X 2 32016X 2 32022X 219 FLANGE 02755 2 02802 2 02797 220 SEAL 70X90X10 2 80X110X10 2 110X130X122For S value see table 4 – page 11.18Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings

13 DECLARATION OF INCORPORATION FOR PARTLYCOMPLETED MACHINERY ANNEX II 1.B (UNDER DIRECTIVE2006/42/EC)TRANSLATION OF ORIGINAL DECLARATIONAUTOROTOR SRL, Via dell’Industria, 4 - I-26010 Vaiano Cremasco (CR) - ItalySTATES THAT THE PARTLY COMPLETED MACHINERYPRODUCT NAMESERIAL N°TORQUE LIM. SETCOMPLIES WITHthe Directive 2006/42/EC of the European Parliament and the Council of 17 May 2006on machinery and amending Directive 95/16/EC as regards the EHSR Annex I below:1.3.1 Risk of loss of stability1.3.4 Risks due to surfaces, edges orangles1.3.2 Risk of break-up during operation 1.5.8 NoiseThe relevant documentation has been prepared in accordance with Annex VII Part B.AUTOROTOR SRL undertakes to provide, in response to duly reasoned request by thecompetent national authorities, relevant information on partly completed machinery.It is prohibited from putting into service of the partly completed machinery describedabove before the machine where it is incorporated or assembled has been declared inconformity with the provisions of Directive 2006/42/EC.The person authorized to provide the relevant technical documentation, established inthe Community is Mr. Ferdinando Bertolotti, Via dell' Industria 4, 26010 VaianoCremasco (CR).Vaiano Cremasco, 01/01/2010.General managerF. Bertolotti.Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 19

NOTE / NOTES___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________20Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings

NOTE / NOTES___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 21

NOTE / NOTES___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________22Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings

OUR GERMAN SISTER COMPANYAUTOROTOR DEUTSCHLAND GMBHMühlweg 4767117 LimburgerhofTel. +49/623661003 - Fax +49/623661004e-mail: info@autorotor.de - http://www.autorotor.deOUR MAIN REPRESENTATIVES AND DISTRIBUTORS ABROADAustraliaBelgiumBrasilCanadaCzech Rep.DenmarkFranceGreeceHollandHAWKER RICHARDSON1a 62-66 Newton RoadWetherill Park NSW 2164Ph. 0419365463 - Fax 1800454599jc@hrltd.com.auwww.hrltd.com.auELEKTROMASS - UNIDRIVE BVBASchoolstraat, 1209040 Sint – AmandsbergPh. +32/92381414 - Fax +32/92381227sales@elektromass.comwww.elektromass.comAXIOS COMERCIO DE MAQUINAS E EQUIPAMENTOSLTDARua Taipas, 632-8A, Bairro Barcelona,09560-200 São Caetano Do Sul, São PauloPh. (55) (11) 4221-8003 - Fax (55) (11) 4226-7271axios@axiosequipamentos.com.brwww.axiosequipamentos.com.brSEMPRESS CANADA INC.3580A Wolfedale RoadMississauga, Ontario L5C-2V6Ph. +1/905-949-2324 - Fax +1/905-949-1944sempress@sempress.cawww.sempress.caBIBUS S.R.O.Videnska, 12563927 Brno CSPh. +420/547125326 - Fax +420/547125310kelbl@bibus.czwww.bibus.czBONDY LMT A/SHassellunden 14DK 2765 SmorumVAT-no: DK-20678100Tel. +45 7015 1414 - Fax.: +45 4464 1416info@bondylmt.dkwww.bondylmt.dkBERNAY AUTOMATION S.A.1, Rue de Menneval27304 Bernay CedexPh. +33/232473510 - Fax +33/232430188info@bernay-automation.comwww.bernay-automation.comPNEUMATEC IND. AUT. SYSTEMSNevrokopiou, 1811855 Athens ELPh. +30-210-3412101 - Fax +30-210-3413930pantosit@otenet.grwww.otenet.grEVERTS PRODUCT HANDLINGVenekoterweg 44, NL 8431 HH OosterwoldePh. +31 516 521589 - Fax +31 516 515637info@everts.nlhttp://www.everts.nlMaltaPoloniaSingaporeSlovak Rep.SloveniaSpainTurkeyUSAArkansasLouisianaNewMexicoOklahomaTexasIllinoisIndianaMichiganOhioRAYAIR AUTOMATION LTD.Corradino Industrial Estate, KW 23 GPAOLA, PLA 08 MaltaPh. +356 21 672497 - Fax +356 21 805181info@ rayair-automation.comwww.rayair-automation.comTB-AUTOMATIONA. Legionow, 1034300 Zywiec - PoloniaTel./Fax 0048/126371377biuro@tb-automation.com.pl (gen. uffici)http://www.tb-automation.com.plSERVO DYNAMICS PTE LTD.10 Kaki Bukit Road, 1 01-30Kaki Bukit Ind. Build. 416175Ph. +65/8440288 - Fax +65/8440070servodynamics@servo.com.sgwww.servo.com.sgBIBUS S.R.O.Trnavska 31SK-949 01 NitraPh. +421 0377777911Fax +421 0377777999bibus@bibus.skwww.bibus.skLIPRO D.O.O.Šmarska c. 186000 Koper - CapodistriaPh. 00386-56251343 - Fax 00386-56251344lipro@siol.netCOTRANSA COMERCIAL DETRANSMISIONES S.A.P.I. Trobika, C/Landeta, 448100 Mungia - BizkaiaPh. +34/944710102 - Fax +34/944710345cotransa@cotransa.netwww.cotransa.netGIMATIC OTOMASYON TICARET LTD STIPerpa Tic. Mrk. A – Blok Kat: 11 No: 1478Okmeydani / ISTANBULPh. +90 (212) 2108391Fax +90 (212) 2108398tsjtucker@gimatic.com.trBURNS CONTROLS13735 Beta RoadDallas Texas 75244Ph. +1/972-233-6712 - Fax +1/972-233-8039burns@burnscontrols.comwww.burnscontrols.comEASOM AUTOMATION SYSTEMS INC.32471 Industrial DrMadison Heights MI 48071Ph. +1/248-307-0650 - Fax +1/248-307-0701sales@easomeng.comwww.easomeng.comParallel axis Intermittent/Oscillating drives – Translation of manual for use and warnings 23

AUTOROTOR srl – Via dell’industria, 4 – 26010 Vaiano Cremasco (CR) ITALY – tel.: +39 0373 278505 – fax.: +39 0373 27806524Parallel axis Intermittent/Oscillating drives – Translation of manual for use and warningse-mail: autorotor@autorotorgroup.com - web: http://www.autorotorgroup.com