PIC Guide - Juniper Networks
PIC Guide - Juniper Networks
PIC Guide - Juniper Networks
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
100-Gigabit Ethernet <strong>PIC</strong> with CFP (T4000 Router)100-Gigabit Ethernet <strong>PIC</strong> with CFP (T4000 Router)g006291Software release• Junos OS Release 12.1 and later (Type 5)For information on which FPCs support this <strong>PIC</strong>, see “T4000 <strong>PIC</strong>/FPC Compatibility” on page 3.Description• One 100-Gigabit Ethernet port• Power requirements with LR4 transceiver: 1.19 A @48 V (57 W)Hardware features• Full bandwidth mode• Online/Offline buttonSoftware features• Interrupt driven link up/down detection. XM chip generates an interrupt in these conditions:• MAC receives local fault• MAC receives remote fault• Clocking support:• Recovery of 8 KHz clock• Tx port timing using the recovered clock from an Rx port can be used to drive the transmitclock of all the ports.• Interface hold timer• Trigger timer• Support for 100 Gigabit Ethernet MIBsCables and connectors• You can install any transceiver supported by the <strong>PIC</strong>.• Connector: Duplex SC straight optical receptacle• 100-Gigabit Ethernet CFP transceiver: 100GBASE-LR4 (model number: CFP-100GBASE-LR4)• Optical interface specifications: 100-Gigabit Ethernet 100GBASE Optical Interface SpecificationsCopyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.7
Change language