Balboa Buttress Plate System Surgical Technique.pdf - Integra ...

More documents

Recommendations

Info

Integra Balboa Buttress Plate SystemLimit uncertainty with asimplified, user-friendlybuttress plate.
Integra Balboa Buttress Plate SystemThe Integra Balboa SystemThe Balboa system is comprised of a Buttress Plate, Buttress Screw, Awl, Buttress Plate Inserter, and 3mm Screwdriver.The plate is attached to the vertebra using one screw. Two fixation spikes located on the underside of the plate are used foradditional stabilization. Alignment grooves on either side of the plate are used to help the surgeon locate the plate in thecephalad and caudad direction.3Buttress Screw Hole33Alignment Grooves3Fixation SpikesPreparation and ApplicationStep 1:Attach the plate to the Plate Inserter by placing the pin onthe Plate Inserter into the slot on the cephalad end of thebuttress plate.Step 2:Position the buttress plate so that the alignment grooves arealigned with the endplates and the fixation spikes and bonescrew hole are located over the vertebral bodyLift up on the thumb wheel and rotate the knob clockwiseto thread the post on the Plate Inserter into the threadedhole on the buttress plate. Do not overtighten the knob.1

Balboa Buttress Plate System Surgical Technique.pdf - Integra ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?