References - Department of Materials Science and Metallurgy ...

ReferencesAaron, H. B., Fainstein, D., Kotler, G. R. (1970): J. Appl. Phys., 41, 4405.Abdel-Hamid, A. A. (1989): Z. Metallk., 80, 566.Abdel-Reihim, M., Hess, N., Reif, W., Birch, M. E. (1987): J. Mater. Sci., 22, 213.Aluminum Association, (1987): Standard Test Procedure for Aluminum Alloy GrainRefiners: TP-1, (The Aluminium Association, Washington DC).Arjuna Rao, A., Murty, B. S., Chakraborty, M. (1997): Mater. Sci. Technol., 13, 769.Arnberg, L., Bäckerud, L., Klang, H. (1982a): Met. Technol., 9, 7.Arnberg, L., Bäckerud, L., Klang, H. (1982b): Met. Technol., 9, 14.Bäckerud, L., Gustafson, P., Johnsson, M. (1991): Aluminium, 67, 910.Bäckerud, L., Boettcher, H., Courtenay, J., Vanik, R. (2004): in Light Metals 2004, ed. A. T.Tabereaux, (TMS, Warrendale, PA), p. 833.Banerji, A., Reif, W. (1985): Metall. Trans. A, 16A, 2065.Birol, Y., Üçüncüoglu, S., Dündar, M., Çakir, O., Akkurt, A. S. (2002): in Light Metals2002, ed. W. Schneider, (TMS, Warrendale, PA), p. 923.Brandes, E. A., Brook, G. B., eds. (1983):(Butterworths, London).Smithells Metals Reference Book 6th ed.Bunn, A. M. (1998): Ph.D. Thesis, University of Cambridge, UK.Bunn, A. M., Evans, P. V., Bristow, D. J., Greer, A. L. (1998): in Light Metals 1998, ed. B.J. Welch, (TMS, Warrendale, PA), p. 963.Bunn, A. M., Schumacher, P., Kearns, M. A., Boothroyd, C. B., Greer, A. L. (1999): Mater.Sci. Technol., 15, 1115.236

ReferencesBurden, M. H., Hunt, J. D. (1974): Journal of Crystal Growth, 22, 109.Charbonnier, J. (1984): AFS Trans., 91, 907.Cibula, A. (1949-50): J. Inst. Metals, 76, 321.Cibula, A. (1951-52): J. Inst. Metals, 80, 1.Cibula, A. (1972): Metall. Trans., 3, 751.Coats, D. E. (1973): Metall. Trans., 4, 2313.Cooper, P. S. (2002): Personal communication.Cooper, P. S., Hardman, A., Boot, D., Burhop, E. (2003): in Light Metals 2003, ed. P.Crepeau, (TMS, Warrendale, PA), p. 923.Cornish, A. J. (1975): Met. Sci., 9, 477.Crossley, F. A., Mondolfo, L. F. (1951): AIME Trans., 191, 1143.Dahle, A. K., Arnberg, L. (1997): Mater. Sci. Eng. A, A225, 38.Davies, I. G., Dennis, J. M., Hellawell, A. (1970): Metall. Trans., 1, 275.Davies, R. H., Dinsdale, A. T., Gisby, J. A., Robinson, J. A. J., Martin, S. M. (2002):Calphad, 26, 229.Delamore, G. W., Smith, R. W. (1971): Metall. Trans., 2, 1733.Delamore, G. W., Smith, R. W. (1972): Metall. Trans., 3, 753.Desnain, P., Fautrelle, Y., Meyer, J. L., Riquet, J. P., Durand, F. (1990): Acta Metall. Mater.,38, 1513.Dong, H. B. (2000): Ph.D. Thesis, University of Oxford, UK.Dong, H. B., Hunt, J. D. (2000): High Temp.-High Press., 32, 311.Donnelly, S. E., Birtcher, R. C., Allen, C. W., Morrison, I., Furuya, K., Song, M. H.,Mitsuishi, K., Dahmen, U. (2002): Science, 296, 507.237

ReferencesDrezet, J. M., Rappaz, M., Grun, G. U., Gremaud, M. (2000): Metall. Mater. Trans. A, 31,1627.Easton, M. A., StJohn, D. J. (1999a): Metall. Mater. Trans. A, 30, 1613.Easton, M. A., StJohn, D. J. (1999b): Metall. Mater. Trans. A, 30, 1625.Easton, M. A., StJohn, D. H. (2000): Mater. Sci. Technol., 16, 993.Easton, M. A., StJohn, D. H. (2001a): Acta Mater., 49, 1867.Easton, M. A., StJohn, D. H. (2001b): in Light Metals 2001, ed. J. L. Anjier, (TMS,Warrendale, PA), p. 927.Easton, M. A., StJohn, D. J., Sweet, L. (2004): in Light Metals 2004, ed. A. T. Tabereaux,(TMS, Warrendale, PA), p. 827.Eremenko, N., Natanzon, V. N., Titov, V. P. (1978): Fizika Khim. Mekh. Mater., 14, 3.Eustathopoulos, N., Joud, J. C., Desré, P. (1972): J. Chem. Phys., 11, 1599.Gandin, C.-A., Rappaz, M. (1994): Acta Mater., 42, 2233.Gandin, C.-A., Charbon, C., Rappaz, M. (1995): ISIJ Int., 35, 651.Gandin, C.-A. (2000): Acta Mater., 48, 2483.Gäumann, M., Trivedi, R., Kurz, W. (1997): Mater. Sci. Eng. A, 226, 763.Gerloff, R., Heyroth, W., Reif, W., Schmidt, U., Wand, T. (1996): Metall, 50, 97.Granger, D. A. (1998): in Light Metals 1998, ed. B. J. Welch, (TMS, Warrendale, PA),p. 941.Greer, A. L., Bunn, A. M., Tronche, A., Evans, P. V., Bristow, D. J. (2000): Acta Mater., 48,2823.Greer, A. L., Quested, T. E., Spalding, J. E. (2002): in Light Metals 2002, ed. W. A.Schneider, (TMS, Warrendale, PA), p. 687.Greer, A. L. (2004): in Solidification of Aluminum Alloys, ed. M. G. Chu, D. A. Granger, Q.Han, (TMS, Warrendale, PA), p. 131.238

ReferencesGriffiths, W. D. (1999): Metall. Mater. Trans. B, 30, 473.Gupta, M., Cook, D. P., Yogeshwar, S. (1999): in Light Metals 1999, ed. C. E. Eckert,(TMS, Warrendale, PA), p. 925.Guzowski, M. M., Sigworth, G. K., Sentner, D. A. (1987): Metall. Trans. A, 18A, 603.Hamerton, R. G., Cama, H., Meredith, M. W. (2000): in Aluminium Alloys: Their Physicaland Mechanical Properties, Pts 1-3, p. 143.Han, Q., Hunt, J. D. (1995): ISIJ Int., 35, 693.Hariedy, M. M., Niazi, A., Nofal, A. A. (1996): in Light Metals 1996, ed. W. Hale, (TMS,Warrendale, PA) p. 697.Hatch, J. E., ed. (1984): Aluminum - properties and physical metallurgy, (ASM, Metals Park,OH).Hayes, F. H., Lukas, H. L., Effenberg, G., Petzow, G. (1989): Z. Metallk., 80, 361.Hillert, M. (1975): in Lectures on the Theory of Phase Transformations, ed. H. I. Aaronson,(AIME, New York), p. 1.Hoefs, P., Reif, W., Schneider, W. (1994): Giesserei, 81, 398.Hunt, J. D. (1984): Mater. Sci. Eng., 65, 75.Hunt, J. D., Lu, S.-Z. (1996): Metall. Mater. Trans. A, 27A, 611.Hunziker, O. (2001): Acta Mater., 49, 4191.Hutt, J. E. C., Dahle, A. K., Lee, Y. C., StJohn, D. H. (1999a): in Light Metals 1999, (TMS,Warrendale, PA), p. 685.Hutt, J. E. C., StJohn, D. H., Hogan, L., Dahle, A. K. (1999b): Mater. Sci. Technol., 15, 495.Hyde, K. B., Norman, A. F., Prangnell, P. B. (2002): Mater. Sci. Forum, 396-4, 39.Ivanstov, G. P. (1947): Dokl. Akad. Na SSSR, 58, 567.Jie, W. Q., Reif, W. (1993): Z. Metallk., 84, 445.239

ReferencesJohnsson, M., Bäckerud, L. (1992): Z. Metallk., 83, 774.Johnsson, M., Bäckerud, L., Sigworth, G. K. (1993): Metall. Trans. A, 24A, 481.Johnsson, M. (1994): Z. Metallk., 85, 781.Johnsson, M., Bäckerud, L. (1996): Z. Metallk., 87, 216.Johnsson, M., Eriksson, L. (1998): Z. Metallk., 89, 478.Johnsson, M., Jansson, K. (1998): Z. Metallk., 89, 394.Jones, G. P., Pearson, J. (1976): Metall. Trans. B, 7B, 223.Jones, G. P. (1985): in International Seminar on Refining and Alloying of Liquid Aluminiumand Ferro-Alloys, ed. T. A. Engh, (Aluminium Verlag, Düsseldorf), p. 213.Jones, G. P. (1987): in Solidification Processing 1987, ed. J. Beech, H. Jones, (The Instituteof Metals, London), p. 496.Karantzalis, A. E., Kennedy, A. R. (1996): Mater. Sci. Forum, 217-222, 253.Karantzalis, A. E., Kennedy, A. R. (1998): Mater. Sci. Technol., 14, 1092.Kearns, M. A., Thistlethwaite, S. R., Cooper, P. S. (1996): in Light Metals 1996, ed. W.Hale, (TMS, Warrendale, PA), p. 713.Kearns, M. A., Cooper, P. S. (1997): Mater. Sci. Technol., 13, 650.Kelton, K. F., Greer, A. L., Thompson, C. V. (1983): J. Chem. Phys. , 79, 6261.Kim, W. T., Cantor, B. (1992): Acta Metall. Mater., 40, 3339.Kim, W. T., Cantor, B. (1994): Acta Mater., 42, 3115.King, F., (1987): Aluminium and its Alloys. Metals and Associated Materials, ed. E. G. West,(Ellis Horwood, Chichester).Klang, H. (1981): Ph.D. Thesis, Univeristy of Stockholm, Sweden.Kori, S. A., Murty, B. S., Chakraborty, M. (1999): Mater. Sci. Technol., 15, 986.240

ReferencesKrajewski, W. (1999): Arch. Metall., 44, 51.Krajewski, W., Greer, A. L., Quested, T. E., Wolcznski, W. (2004): in Solidification andCrystallization, ed. D. M. Herlach, (Wiley-VCH, Weinheim), p. 137.Krieder, K. G., Sheahen, T. P. (1981): in Heat and mass transfer in metallurgical systems,ed. D. B. Spalding, N. H. Afgan, (McGraw-Hill, New York).Kron, J., Antonsson, T., Fredriksson, H. (2002): Int. J. Cast. Metals Res., 14, 275.Kurz, W., Fisher, D. J. (1981): J. Cryst. Growth, 29, 11.Kurz, W., Giovanola, B., Trivedi, R. (1986): Acta Metall., 34, 823.Kurz, W., Fisher, D. J., (1989):Publications, Aedermannsdorf).Fundamentals of Solidification, 3rd ed., (Trans TechLanger, J. S., Müller-Krumbhaar, H. (1978): Acta Metall., 26, 1681.Maggs, S. J., Cochrane, R. F., Flood, S. C., Evans, P. V. (1995): in Light Metals 1995, ed. J.Evans, (TMS, Warrendale, PA), p. 1039.Maggs, S. J. (1996): Ph.D. Thesis, University of Leeds, UK.Massalski, T. B., ed. (1990): Binary Alloy Phase Diagrams, 2nd ed. (ASM International,Metals Park, OH).Mathiak, G., Grieshe, A., Kraatz, K. H., Frohberg, G. (1996): J. Non-Cryst. Solids, 207, 412.Matucha, K. H., ed. (1996): Structure and properties of nonferrous alloys, vol. 8. (VCH,Weinheim).Maxwell, I., Hellawell, A. (1972): Metall. Trans., 3, 1487.Maxwell, I., Hellawell, A. (1975): Acta Metall., 23, 229.Mayes, C. D., McCartney, D. G., Tatlock, G. J. (1993): Mater. Sci. Technol., 9, 97.McCartney, D. G. (1989): Int. Mater. Rev., 34, 247.McKay, B. J. (2001): Ph.D. Thesis, University of Oxford, UK.241

ReferencesMcKay, B. J., Cizek, P., Schumacher, P., O'Reilly, K. A. Q. (2001): Mater. Sci. Eng. A, 304,240.Meredith, M. W. (1999): Ph.D. Thesis, University of Cambridge, UK.Meredith, M. W., Greer, A. L., Evans, P. V., Hamerton, R. G. (1999): in Light Metals 1999,ed. C. E. Eckert, (TMS, Warrendale, PA), p. 811.Meredith, M. W., Worth, J., Hamerton, R. G. (2002): in Aluminum Alloys 2002: TheirPhysical and Mechanical Properties Pts 1-3, p. 107.Mohanty, P. S., Gruzleski, J. E. (1994): Scr. Metall. Mater., 31, 179.Mohanty, P. S., Gruzleski, J. E. (1995): Acta Mater., 43, 2001.Mondolfo, L. F., (1976):London).Aluminium alloys - structures and properties, (Butterworths,Moriceau, J. (1972): Rev. Aluminium, 12, 977.Morrell, R. (2003): Personal communication.Mullins, W. W., Sekerka, R. F. (1963): J. Appl. Phys., 34, 323.Murty, B. S., Kori, S. A., Chakraborty, M. (2002): Int. Mater. Rev., 47, 3.Naess, S. E., Rønningen, J.-A. (1975): Metallography, 8, 391.Panseri, C., Guastalla, B. (1941): Alluminio, 10, 207.Pelcé, P., (1988): Dynamics of Curved Fronts, (Academic Press, New York).Petzow, G., Effenberg, G., eds. (1989): Ternary Alloys, (Wiley, Hoboken, NJ).Pines, V., Chait, A., Zlatkowski, M., Beckermann, C. (1999): J. Cryst. Growth, 197, 355.Platek, S. (1999): in Light Metals 1999, ed. C. E. Eckert, (TMS, Warrendale, PA), p. 939.Polmear, I. J., (1989): Light Alloys, 2nd ed., (Edward Arnold, London).Qian, M., StJohn, D. H., Frost, M. T. (2003): in Magnesium Alloys 2003, Pts 1 and 2, p. 593.242

ReferencesQian, M., StJohn, D. H. (2004): Scr. Mater., 50, 1115.Quested, T. E., Greer, A. L., Cooper, P. S. (2002): Mater. Sci. Forum, 396-4, 53.Rappaz, M., Thévoz, P. (1987): Acta Metall., 35, 2929.Rappaz, M., Gandin, C.-A. (1993): Acta Mater., 41, 345.Robinson, J. A. J., Dinsdale, A. T., Chapman, L. A., Monaghan, B. J., Morrell, R., Quested,P. N. (2002): presentation at 16 th European Conference on Thermophysical Properties,London.Schaffer, P. L., Dahle, A. K., Zindel, J. W. (2004): in Light Metals 2004, ed. A. T.Tabereaux, (TMS, Warrendale, PA), p. 821.Schneider, W., Kearns, M. A., McGarry, M. J., Whitehead, A. J. (1998): in Light Metals1998, ed. B. J. Welch, (TMS, Warrendale, PA), p. 953.Schneider, W. A., Quested, T. E., Greer, A. L., Cooper, P. S. (2003): in Light Metals 2003,ed. P. Crepeau, (TMS, Warrendale, PA).Schumacher, P., Greer, A. L. (1994a): Mater. Sci. Eng. A, 178, 309.Schumacher, P., Greer, A. L. (1994b): Mater. Sci. Eng. A, 182, 1335.Schumacher, P., Greer, A. L., Worth, J., Evans, P. V., Kearns, M. A., Fisher, P., Green, A. H.(1998): Mater. Sci. Technol., 14, 394.Schumacher, P., McKay, B. J. (2003): J. Non-Cryst. Solids, 317, 123.Sigworth, G. K. (1984): Metall. Trans. A, 15A, 277.Sigworth, G. K., Guzowski, M. M. (1985): AFS Trans., 93, 907.Sigworth, G. K. (1996): Scr. Mater., 34, 919.Sigworth, G. K. (2001): in Light Metals 2001, Métaux Legers, ed. M. Sahoo, (CanadianInstitute of Mining, Metallurgy and Petroleum, Montreal, Quebec), p. 349.Smith, C. S. (1940): AIME Trans., 137, 236.Spittle, J. A., Sadli, S. (1995): Mater. Sci. Technol., 11, 533.243

ReferencesSpittle, J. A., Keeble, J. M., Al Meshhedani, M. (1997): in Light Metals 1997, ed. R. Huglen,(TMS, Warrendale, PA), p. 795.Stolz, U. K., Sommer, F., Predel, B. (1995): Aluminium, 71, 350.Storer, R., ed. (1987): Annual book of ASTM standards, (ASTM, Philadelphia, PA).Straatsma, E. N., Kool, W. H., Katgerman, L. (1999): in Light Metals 1999, ed. C. E. Eckert,(TMS, Warrendale, PA), p. 919.Tøndel, P. A. (1994): Ph.D. Thesis, University of Trondheim, Norway.Tronche, A. (2000): Ph.D. Thesis, University of Cambridge, UK.Tronche, A., Greer, A. L. (2001): Philos. Mag. Lett., 81, 321.Tronche, A., Vandyoussefi, M., Greer, A. L. (2002): Mater. Sci. Technol., 18, 1072.Vader, M., Noordegraaf, J., van Wiggen, P. C. (1991): in Light Metals 1991, ed. E. L. Rooy,(TMS, Warrendale, PA).Vandyoussefi, M., Worth, J., Greer, A. L. (2000): Mater. Sci. Technol., 16, 1121.Vandyoussefi, M., Greer, A. L. (2002): Acta Mater., 50, 1693.Wang, C. Y., Beckermann, C. (1994): Metall. Mater. Trans. A, 25, 1081.Weast, R. C., ed. (1985): CRC handbook of Chemistry and Physics, 66 th ed. (CRC Press,Boca Raton, FL).Zupanic, F., Spaic, S., Krizman, A. (1998a): Mater. Sci. Technol., 14, 601.Zupanic, F., Spaic, S., Krizman, A. (1998b): Mater. Sci. Technol., 14, 1203.244