Ixia Black Book: 802.11ac Wi-Fi Benchmarking

More documents

Recommendations

Info

Test Case: Packet Loss Benchmark TestFigure 4. Create and name the clients. Click the Clients button on the leftnavigation panel. Click on the “+” to create a client group. Type the name in the“Name” box and select the interface type from the drop down menu. Select theWiFi port and configure the client as shown below.Figure 4.Client CharacteristicsPN 915-2634-01 Rev A December 2012 11
Test Case: Packet Loss Benchmark TestFigure 5. Click the Test setup button and select the Packet Loss Properties tab.Specify the frame size and frame rates that you want to use to run a packet loss test.It is recommended to use minimum, typical, and maximum length frames in order totest the maximum frame rate that the AP must handle. Short frames test themaximum frame rate and long frames test the maximum bit rate.Figure 5.Test ParametersPN 915-2634-01 Rev A December 2012 12
Page 3: 802.11ac WiFi BenchmarkingYour feed
Page 7 and 8: 802.11ac WiFi BenchmarkingHow to Re
Page 9 and 10: 802.11ac WiFi Benchmarking802.11ac
Page 11 and 12: Introduction to 802.11ac Performanc
Page 17 and 18: Test Case: Packet Loss Benchmark Te
Page 19: Test Case: Packet Loss Benchmark Te
Page 29 and 30: Test Case: Maximum Client CapacityS
Page 31 and 32: Test Case: Maximum Client CapacityF
Page 33 and 34: Test Case: Maximum Client Capacity4
Page 35 and 36: Test Case: Maximum Client CapacityT
Page 38 and 39: Test Case: Latency Benchmark TestTe
Page 40 and 41: Test Case: Latency Benchmark Test3.
Page 42 and 43: Test Case: Latency Benchmark Test4.
Page 44 and 45: Test Case: Latency Benchmark TestFi
Page 46 and 47: Test Case: Latency Benchmark TestIs
Page 48 and 49: Test Case: Throughput Benchmark Tes
Page 58: Test Case: Throughput Benchmark Tes
Page 61 and 62: Test Case: TCP Goodput Benchmark Te
Page 70 and 71:
Contact IxiaCorporate HeadquartersI
show all

Ixia Black Book: 802.11ac Wi-Fi Benchmarking

Create successful ePaper yourself

Delete template?

Save as template?