Ixia Black Book: 802.11ac Wi-Fi Benchmarking

More documents

Recommendations

Info

Test Case: Latency Benchmark Test3. Click the Start Test Configuration button.Figure 17.Application Suite SelectionFigure 18. Connect to the test chassis and select the port to use for following tests.Note: When scanning for channels the scan stops at the lowest channel that has anactive signal on it. If the channel detected is not the channel desired for the test enterthe band and channel using the drop down menus at the right, then click the ScanBSSISs button to obtain the desired BSSID/SSID.Figure 18.Port SelectionPN 915-2634-01 Rev A December 2012 31
Test Case: Latency Benchmark TestFigure 19. Create and name the clients. Click the Clients button on the leftnavigation panel. Click on the “+” to create a client group. Type the name inthe “Name” box and select the interface type from the drop down menu.Select the WiFi port and configure the client as shown below.Figure 19.Client CharacteristicsPN 915-2634-01 Rev A December 2012 32
Page 3: 802.11ac WiFi BenchmarkingYour feed
Page 7 and 8: 802.11ac WiFi BenchmarkingHow to Re
Page 9 and 10: 802.11ac WiFi Benchmarking802.11ac
Page 11 and 12: Introduction to 802.11ac Performanc
Page 17 and 18: Test Case: Packet Loss Benchmark Te
Page 29 and 30: Test Case: Maximum Client CapacityS
Page 31 and 32: Test Case: Maximum Client CapacityF
Page 33 and 34: Test Case: Maximum Client Capacity4
Page 35 and 36: Test Case: Maximum Client CapacityT
Page 38 and 39: Test Case: Latency Benchmark TestTe
Page 42 and 43: Test Case: Latency Benchmark Test4.
Page 44 and 45: Test Case: Latency Benchmark TestFi
Page 46 and 47: Test Case: Latency Benchmark TestIs
Page 48 and 49: Test Case: Throughput Benchmark Tes
Page 58: Test Case: Throughput Benchmark Tes
Page 61 and 62: Test Case: TCP Goodput Benchmark Te
Page 70 and 71: Contact IxiaCorporate HeadquartersI

Ixia Black Book: 802.11ac Wi-Fi Benchmarking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?