LIFTING AND LASHING SYSTEMS - RUD

Extremely robust and approved design.Hook automatically locks when lifting the load.Can only be opened by activating the protectedunlocking lever on the back of the hook.No protruding hook tip.Large mouth width size F.Wearing edges > dimension B < on both sides ofthe hook protect the chain against abrasion whenthe assembly is dragged or hauled.Connecting bolt and tensioning sleeve are preassembled.Safety latch spare parts available on demand.VAGH (S)Advantages:● Optimized weight by innovative structure design● Antislip locking mechanism – no squeezinghazard● Wear distance ridges which protect the first chainlink● Thickened tip of hook, patented wear marks andmeasuring points for checking the width of hook.***TT DFFAEAFmaxBCBLIFTING MEANSVIP-Self-lockinghookVAGH®use+pointDECChain WLL t Type A B C D E F F max T kg/pc. Ref. No.8 2.5 VAGH 8* 36 22 25 31 91 43 - 117 0.97 71 01 5008 2.5 VAGH (S)-8** 40 30 27 28 97 44 60 121 1.0 79 00 04610 4.0 VAGH 10* 44 28 33 34 108 47 - 140 2.0 71 01 50110 4.0 VAGH (S)-10** 49 37 30 31 107 48 66 135 1.5 79 00 04713 6.7 VMAGH 13 58 36 33 42 120 47 - 150 2.2 79 89 49013 6.7 VAGH (S)-13** 61 48 36 40 133 61 81 169 2.9 79 00 048*as long as stock lasts ** replacement for VAGH● No reduction of theVIP-WLL.● Thickened hook tip toavoid misuse e.g; in -correct insertion of thechain.● The calibrated toothlugs facilitate an optimalchain positioningin the hook.● The curved insertionopening prevents thechain from easily fallingout in compliance withDIN 5692.● Connecting bolt andtensioning sleeve arepre-assembled.VVHVVSShorteningby meansof VVSand VVHmax.60°VVHEndlesschain bymeansof VVHEADCTBFVIPshorteninghookVVHSpecial designed hook tipto avoid misuse.✕Probable misuse!MAXISubject to technical modifications!Chain WLL t Type A B C D E F T kg/pc. Ref. No.6 1.5 VVH 6 34 18 20 44 7.5 23 53 0.27 79 88 6588 2.5 VVH 8 38 22 25 54 9.5 33 64 0.35 79 87 31910 4.0 VVH 10 47 28 31 68 12 42 80 0.8 79 87 32013 6.7 VVH 13 60 36 40 87 15 47 103 2.2 79 87 32116 10.0 VVH 16 75 45 50 108 18.5 57 125 3.5 79 88 66920 16.0 VVH 20 92 58 63 138 24 76 162 8.4 85 03 63022 20.0 VVH 22 102 62 69 151 26 83 179 11.0 85 03 631Attention:New Standard forshortening elementsDIN 5692!All RUD shorteningcomponents doalready fulfil theserequirements.21