LIFTING AND LASHING SYSTEMS - RUD

More documents

Recommendations

Info

$E:\GL-M 163 RUD-MATIC DISC\BA-DISC.CDR$

LIFTING MEANSVIP-MultishorteningclawVMVKEP 0736150Attention:®New Standard forshortening elementsDIN 5692!All RUD shorteningcomponents doalready fulfil theserequirements.B 2B 1TGAAfter decades of success the RUD shortening clawhas been further enhanced.Fitted on a continuous chain strand at any requiredposition.Fitted permanently on the chain leg at any requiredposition, no additional chain coupling devicesare required.It can either be mounted or easily moved to anyposition along the chain leg.The ideal link shaped chain pocket facilitates evenwearing of the chain thus no reduction of the WLL.A robust safety bolt with spring prevents accidentalloosening of the chain in both loaded andunloaded condition.In case of a mounted but not firmly fixed VMVK,please adhere to the instructions marked”Attention“ below.Complies with DIN 5692.Chain WLL t Type A B 1 B 2 T G kg/pc. Ref. No.6 1.5 VMVK 6 38 34 40 66 38 0.3 79 84 0728 2.5 VMVK 8 46 41 52 88 48 0.55 71 00 76010 4.0 VMVK 10 58 50 64 110 60 1.1 71 00 76113 6.7 VMVK 13 74 64 86 143 76 2.4 71 00 76216 10.0 VMVK 16 91 79 105 176 98 4.4 71 00 763VMVKFitting andHandlingABDo not putloose chainunder load31Do not putloose chainunder loadLoad directionLoad directionFitting:Pull loose chain strand through thecrucifix. Secure the chain in thelocking pocket at the requiredposition and drive in the retainingpin A . Thus the multi shorteningclaw is fixed in the VIP chain strand.It is preferable to fit and securethe claw on the third chain linkdown from the suspension link formaximum adjustment. Slide thechain into the slot and secure.Always let theloose chain facedownwards.Handling:In a loosened condition, insertthe required link of the to beloaded slack chain leg into thepocket support 1 . Pull downthe chain leg and press the securingbolt 3 . The securing boltlocks automatically. Check thelocking. To unlock reverse theabove procedure while simultaneouslypressing the securingbolt 3 .LoadingLoadingAttention:If the VMVK or BSEK is usedwithout securing bolt the chainmust always be completely seatedin the locking slot B !When pulling/lifting the shortenedchain assembly attentionmust be paid to ensure that thechain remains in the locking slot!User advice:Easier application for example ifan endless sling is being used.Subject to technical modifications!22
TB2For the 20, 22 and 28 mm VIP-chain, only thestandard shortening claw is available in VIP quality.● Chain saving pocket support● no reduction of WLL● light constructionNew: The robust safety bolt supported by a springavoids an unintensional dismounting of the chainin unloaded as well as loaded conditions. Complieswith DIN 5692.LIFTING MEANSVIPshorteningclawVV-20/22®use+pointB1AChain WLL t Type A B 1 B 2 T G kg/pc. Ref. No.20 16 VV 20 117 101 102 140 – 8.8 79 94 85622 20 VV 22 117 101 102 140 – 8.5 79 94 85528 31.5 VV 28 150 130 130 170 – 16.9 79 00 643Attention:New Standard forshortening elementsDIN 5692!All RUD shorteningcomponents doalready fulfil theserequirements.Assembly for Ø 20 and 22:1-leg –adjustable – fully captiveExample:2-leg –adjustable – fully captiveVAK 4-224-leg –adjustable – fully captiveVAK 4-223-linkVIP 22x66MAXIAttention:Fit with a 1-legVKZA-tagAttention:Fit with a 2-legVKZA-tagSubject to technical modifications!23
Page 3 and 4: CONTENTSRUD Company Profile/Content
Page 5 and 6: VIP-Quality -“Made in Germany!”
Page 7 and 8: FOOL-PROOF»IN PINK«®FOOL-PROOF»
Page 9 and 10: use+point50 mmRUD-ID-POINT ®8 mmRe
Page 11 and 12: 1-leg 2-leg 3- and 4-leg endless®L
Page 13 and 14: VSAK1 master link is suppliedcomple
Page 15 and 16: VSAK 2 master link is suppliedwith
Page 17 and 18: VSAK 4 master link is suppliedwith
Page 19 and 20: Considerably larger mouth width tha
Page 21: Extremely robust and approved desig
Page 25 and 26: Connection toVGIL:e.g. VV GSCHEnd l
Page 27 and 28: Various external connec tions e.g.
Page 29 and 30: Special Links see page 13®Cobra-Ey
Page 31 and 32: A WORLD SPECIALTY-the one and only
Page 33 and 34: WLL SchemeVIP 28 x 84For symmetrica
Page 35 and 36: VIP Spreader bar adjustable VSRVWhe
Page 37 and 38: ® ®100Endless chain ICE-120 and V
Page 39 and 40: Lifting Points - for bolting -Maxim
Page 41 and 42: Lifting Points - for welding -Maxim
Page 43 and 44: ®RUD Lashing chain ICE-CURTwith hi
Page 45 and 46: ICE sets benchmarks in lashingchain
Page 47 and 48: Tensioner according to(DIN-EN-12195
Page 49 and 50: ■ Visual examination: This reveal
Page 51 and 52: © Alstom®Ø 20Ø 22°CINSPECTION/
Page 53 and 54: K!d Grade 120 (ICE)g chainsetric lo
Page 55 and 56: ®®LIFTINGPOINTS55Important inform

LIFTING AND LASHING SYSTEMS - RUD

Create successful ePaper yourself

Delete template?

Save as template?