LIFTING AND LASHING SYSTEMS - RUD

LIFTING MEANS®➀The safety sensationImmediate visual indication of overload - due to thespecially calibrated RUD control link VCGH. Althoughstationary fitted it can easily be replaced bymeans of the Combi-lock VVS-U consisting of:VIP-OverloadindicatorcompleteVCGUniqueRUDproduct!f➁➂➃➀ Combi-lockVVS-U(see page 27)➁ Control link VCG➂ VIP chain, 3 links(see page 10)➃ Combi-lockVVS-U(see page 27)Easy hammer mounting(fool-proof chainconnection)With indicator bars and acalibrated slot width(nominal… mm)Additional securing elementbesides the control link inside connectionEasy assembly(fool-proof chainconnection)nom.Control link VCGControl link VCGType WLL Initial size Weight Ref.t nom. (mm) kg No.VCG – 6 1.5 4 0.06 79 87 623VCG – 8 2.5 6 0.10 79 87 046VCG –10 4 7 0.20 79 87 626VCG –13 6.7 10 0.40 79 88 245VCG –16 10 11 0.70 79 89 743VCG –20 16 12 1.10 79 92 549VCG –22 20 16 1.90 79 92 551Overload indicator VCG (complete)Nom. size WLL single build. Weightchain mm t parts length (mm) kg6 1.5 115 0.38 2.5 VVS-U VSV-V 151 0.510 4 VCG198 1.213 6.7 3-Gld. 3 links Kette 232 2.116 10 Chain VSV-V 291 4.520 16 VVS-U 345 8.822 20 382 12.1Hintsfor useImmediate visual indication of overload –due to the specially calibrated RUD control link VCG.forceProof load1.8 timesWLLWLLchaincharacteristicCharacteristicIf the two indicator bars are notclosed after overload (slot width> 0.5 mm), the user may install anew control link.Should the overload repeatedlyoccur, a bigger chain size has tobe used. If the bars are closed oreven bent up, the chain has to beremoved from operation and beexamined (as per BGR 500).ElongationControl linkDo not exceed permissible WLL!The calibrated slot width correspondswith the indicatednominal size.Chain strand overloaded!Clearly visible through the indicator.Slot width will decreasewith increasing overload.The closing of the indicatorimplies that the WLL has beenexceeded by 80 % to 100 %!Subject to technical modifications!30