LIFTING AND LASHING SYSTEMS - RUD

More documents

Recommendations

Info

$E:\GL-M 163 RUD-MATIC DISC\BA-DISC.CDR$

VIP SLING CHAINS IN <strong>RUD</strong>SPECIAL QUALITY CLASS 10®VIP-proven since 1994in the hardest applications!● Despite having the same chain diameter, an up to 30 % increase in the WLL in comparison to thehitherto highest quality class 8.<strong>LIFTING</strong> MEANS● Chain dimensions from 4 to 28 mm. WLL from 0.6 t to 31.5 t in single leg and up to 56 t in a 4-legconfiguration with a balancer.● Distinctive fluorescent pink powder coating and clear "VIP" stamp on every chain link and component.Distinctive in comparison to other quality classes. Surface quality is comparable to a zinc platedsurface.● Chain diameters 16, 20 and 22 mm in VIP special quality replace the 18, 22 and 26 mm chain diametersof quality grade 8. Smaller chain sizes, hence a considerable reduction of weight whichfacilitates easy handling.● Multifunctional WLLidentification tag: Owingto it`s special patentedshape, it facilitatessimple inspection of thethree wear criteria forsling chains (diameter,elongation of pitch andoverload). The inspection data can be documented on the tag.● Heat indicator:The pink powder coating changes its colour withtemperatures exceeding 200°C. Chain shouldnot be used after being subject to temperaturesexceeding 380°C. At this temperature the VIPcolour changes to a deep black with smallbubbles, clearly indicating that it has been overheated.225 °C 250 °C 275 °C 300 °C 320 °C 350 °C 375 °C 380 °C4®-Mecano System”in miniature”4 mm chain andcomponents!● Master link collection for every crane hook:The chain connecting link VRG is attached to the corresponding master link in a permanent but flexible way. The fool – proof clevis connection allways ensures that only the correct chain diameter canbe fitted. The collection of master links range from the smallest VBK size for the high tensile hoisthooks up to crane hook No. 50 with Bi = 250 mm in 1 to 4 leg assembly versions.● The patented multi shortening claw can be fitted on the chain leg at any required position. Noadditional chain and coupling parts are required. The robust safety bolt with a spring preventsun intentional hooking out of the chain in both loaded and unloaded conditions. Ideal chain linkshaped pocket support, thus no reduction in the WLL (DIN 5692).● VIP Cobra hook:The compact design of the VIP Cobra hook with no protruding hook tip is far superior and saferthan the common clevis sling hook. Supplied complete with a forged and tempered safety latchthat locks into the hook tip protects against lateral bending. The safety latch is supported by a triplecoiled double leg. The enlarged hook tip prevents misuse. Wear edges on both sides of the hookprotect against abrasion of the chain when hauling the chain assemblies. Gauge marks on the hookenable easy inspection for the elongation of the width of the hook opening.● VIP automatic clevis hook:Extremely robust design. The hook locks automatically when lifting the load and can only beopened by activating the protected unlocking lever at the back of the hook. No protruding hooktip. Large mouth width size F.● VIP shortening hook: According to DIN 5692:With no reduction of WLL and a thickened hook tip to avoid misuse e.g. incorrect fitting of thechain. Ideal chain support facilitated by the calibrated lugs. The U-bend insertion slot protectsagainst accidental chain disengangement.● World wide unique: The VIP Mecano System with the 4 mm and 28 mm chain.Subject to technical modifications!
VIP-Quality –“Made in Germany!”Applicationexamples– VIP –use+point®MAXI®Subject to technical modifications!5
Page 3: CONTENTSRUD Company Profile/Content
Page 7 and 8: FOOL-PROOF»IN PINK«®FOOL-PROOF»
Page 9 and 10: use+point50 mmRUD-ID-POINT ®8 mmRe
Page 11 and 12: 1-leg 2-leg 3- and 4-leg endless®L
Page 13 and 14: VSAK1 master link is suppliedcomple
Page 15 and 16: VSAK 2 master link is suppliedwith
Page 17 and 18: VSAK 4 master link is suppliedwith
Page 19 and 20: Considerably larger mouth width tha
Page 21 and 22: Extremely robust and approved desig
Page 23 and 24: TB2For the 20, 22 and 28 mm VIP-cha
Page 25 and 26: Connection toVGIL:e.g. VV GSCHEnd l
Page 27 and 28: Various external connec tions e.g.
Page 29 and 30: Special Links see page 13®Cobra-Ey
Page 31 and 32: A WORLD SPECIALTY-the one and only
Page 33 and 34: WLL SchemeVIP 28 x 84For symmetrica
Page 35 and 36: VIP Spreader bar adjustable VSRVWhe
Page 37 and 38: ® ®100Endless chain ICE-120 and V
Page 39 and 40: Lifting Points - for bolting -Maxim
Page 41 and 42: Lifting Points - for welding -Maxim
Page 43 and 44: ®RUD Lashing chain ICE-CURTwith hi
Page 45 and 46: ICE sets benchmarks in lashingchain
Page 47 and 48: Tensioner according to(DIN-EN-12195
Page 49 and 50: ■ Visual examination: This reveal
Page 51 and 52: © Alstom®Ø 20Ø 22°CINSPECTION/
Page 53 and 54: K!d Grade 120 (ICE)g chainsetric lo
Page 55 and 56:
®®LIFTINGPOINTS55Important inform
show all

LIFTING AND LASHING SYSTEMS - RUD

Create successful ePaper yourself

Delete template?

Save as template?