Download - Buderus

7 Boiler block assembly7 Boiler block assemblyWARNING: Risk of injury from improperlysecured boiler sections.B Use only suitable means of transportationwhen handling the boiler sections, e.g. aheavy duty hand truck with strap or aheavy duty hand truck.B Secure the individual boiler sections toprevent them from sliding off duringtransport.7.1 Assembly of a boiler block fromsectionsWARNING: Risk of injury from inadequatelysecured boiler sections.B Secure boiler sections during assemblyand take measures to prevent them fromtipping over. The installation aid(accessory) is available from Buderus onrequest.5 67483219107Fig. 8Boiler heat exchanger1 Boiler base or foundation2 Exhaust manifold3 Rear section4 Return connection5 Supply connection6 Intermediate section7 Tie rod8 Sequence of installation9 Front section10 Burner door with burner plate6 720 642 623-06.1oDepending on the type of delivery, we distinguishbetween delivery as disassembled sections and as readyassembled block. When delivered as a block, the boilersections are already fully assembled and checked forleaks prior to delivery. If the assembled boiler is too largeor too heavy to be brought to its final installation locationin the building, delivery of the disassembled boiler insections offers a solution.For the further installation of a pre-assembled boiler block,see Chapter 7.3, page 24.6 720 642 621-04.1oFig. 9 Rear sectionThe boiler block is always installed starting from the rearwith the rear section ( Fig. 8, [3], page 18) and workingtoward the front. The front section ( Fig. 8, [9],page 18) is always fitted last.Observe the directional arrows ( Fig. 8, [8]) duringassembly and carry this out in accordance with thefollowing instructions and illustrations.18Logano G515 - Subject to technical modifications