Download - Buderus

7 Boiler block assembly7.9 Installation of the boiler jacketThis section describes how to install thermal insulationand jacket components.B You must install the cross rails andlongitudinal rails before installing thethermal insulation in order to be able toalign the brackets correctly.B To install the thermal insulation, you needto take the longitudinal rails off again in thefollowing step.7.9.1 Mount the bracketsB Loosely screw the brackets for the boiler jacket ontothe upper ribs of the boiler sections on the left and right( Fig. 35, Fig. 36 and Tab. 12).B Screw the brackets on the rear section( Fig. 36, [2]) to the ribs from behind.B Screw the brackets of the front andintermediate sections ( Fig. 36, [1]) onfrom the front only.2145362176 720 642 623-34.1o6 720 642 623-33.1oFig. 35 View from above: boiler block (7 boiler sections)with bracketsFig. 36 Installing the mounting bracketsTotalnumber ofboilersectionsRight and left-hand installation on...Front sectionSection no.IntermediatesectionSection no.Rear sectionSection no.7 1 4 78 1 4 89 1 5 910 1 5 1011 1 4 and 7 1112 1 4 and 8 12Tab. 1230Logano G515 - Subject to technical modifications