APPENDIX A - Valtek

Method for Making the Cable for Connection to the PCAppendix DMaking the Cable for Connection to the PC (RS-422A Type)Parts RequiredTwo connectors, two connector covers and one cable are required to make up a connecting cable. One connectorand one connector cover is supplied with most PCs.Name Model Delivered with RemarksConnectorXM2A-0901 CseriesCQM1 9-pin, manufactured by OMRONDE-9P C200H-LK202 9-pin, manufactured by JAEConnector XM2S-0911 CseriesCQM1 9-pin, manufactured by OMRONcover DE-C1-J6 C200H-LK202 9-pin, manufactured by JAEWhen connecting the NT11S to an OMRON PLC CjjH , the connector and the connector cover must be preparedseparately since they are not supplied with the CjjH.The connector provided in the CPU unit of the CjjH is a 9-pin connector. For the connection, the following connectorand connector hood should be prepared.S Connector:XM2A-0901 (9-pin type, OMRON)S Connector cover: XM2S-0911 (9-pin type, OMRON)Prepare the cable recommended by OMRON.The recommended cables are indicated in the following table.CableName Type RemarkH-9293A(CO-HC-ESV-3P × 7/0.2)For RS-422A (HIRAKAWA Hewtech Corp.)150