APPENDIX A - Valtek

Method for Making the Cable for Connection to the PCAppendix DAPPENDIX DMethod for Making the Cable for Connection to the PCExplained below is the method for making the cable that connects the NT11S and the PC/Host.Connect the wires to the connectors in accordance with the connector specification for each unit.Making the Cable for Connection to the PC (RS-232C Type)Parts RequiredTwo connectors, two connector covers and one cable are required to make up a connecting cable. One connectorand one connector cover is supplied with most PCs.PCNT11S 1SName Model Delivered with RemarksConnectorXM2A-0901 CseriesCQM1 9-pin, manufactured by OMRONXM2A-2501 C200H-LK201 25-pin, manufactured by OMRONConnector XM2S-0911 CseriesCQM1 9-pin, manufactured by OMRONcover XM2S-2511 C200H-LK201 25-pin, manufactured by OMRONConnector XM2A-0901 — 9-pin, manufactured by OMRONConnectorcoverXM2S-0911 — 9-pin, manufactured by OMRONWhen connecting the NT11S to an OMRON PLC CjjH , the connector and the connector cover must be preparedseparately since they are not supplied with the CjjH.The connector provided in the CPU unit of the CjjH is a 9-pin connector. For the connection, the following connectorand connector hood should be prepared.S Connnector:XM2A-0901 (9-pin type, OMRON)S Connector cover: XM2S-0911 (9-pin type, OMRON)Prepare the cable recommended by OMRON.The recommended cables are indicated in the following table.CableName Type RemarkAWG28¢5PIFVV-SBCO-MA-VV-SB5P¢28AWGMulticonductor shielded cable (FUJIKURA, Ltd.)Multiconductor shielded cable (HITACHI Cable, Ltd.)146