jack loom - Ashford Handicrafts

More documents

Recommendations

Info

8ASSEMBLY OF THE LOOM1 Assemble the base as detailed in illustration 1 and 2 using 90 mm hex head bolts, washers andbarrel nuts. Note the holes in rail BX are to the top. Bushes in parts C and CX are on the inside.
92 Bolt castle side E to the outside of base rail A, and the castle side EX to the base rail AX using70 mm round head bolts, washers and hex nuts as shown in illustration 3. Note the nylon shaftguides are to the inside of the frame and holes for the beater stops face forward.3 Secure the blocks O to the inside of the castle sides E and EX with 70 mm round head bolts,washers and nuts as shown in illustration 3.
Page 3 and 4: 3ljwkpfnexv
Page 5 and 6: Jack Loom Parts5
Page 7: 7ASSEMBLY INSTRUCTIONSASHFORD 4 & 8
Page 11 and 12: ILLUSTRATION 4a11
Page 13 and 14: 13h12 Secure the ratchet lever stop
Page 15 and 16: 1516 Attach the hole end of P to th
Page 17 and 18: 1723 assembly of the shaftsYour Ash
Page 19 and 20: 26 Attach the castle top rails T to
Page 21 and 22: 2132 Flame the ends of the nylon co
Page 23: 2333 Attach the raddle blocks to th

jack loom - Ashford Handicrafts

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?