Instruction Manual - RC World

More documents

Recommendations

Info

7MotorGlue the firewall to the head of the plan.F ixed with some foam-friendly C/AAssemble the motor onto the firewall, using the fourwood screws provided.PRO TIP After flying theairplane, you may want to add right and/or downthrust to the motor. You can do this by adding thinwashers between the motor mount and the firewall.8FinalAssembly F ixed with some foam-friendly C/AFixed with some foam-friendly C/A5
9Landing GearF ixed with some foam-friendly C/A10ControlSystem Mount your ESC to the fuselage,using a piece of velcro .Mount your receiver to thefuselage side, using a pieceof velcro.Assemble your battery into thebatterycompartment, using apiece ofvelcro.Plug the servo and ESC leads into their proper slots in your receiver,then mount your battery to thefuselage, opposite the ESC.Run the antenna out the bottom of the fuselage and secure it along itslength, using pieces of clear tape (not included). Do not cut the antenna shorter. Allow the excess tohang beyond the back of the fuselage.6
Page 1 and 2: Beforeusepleasereadtheexplanationsc
Page 3 and 4: 32WingStick the carbon strips on th
Page 5: 6Servosanditsconnecting bar aileron

Instruction Manual - RC World

Create successful ePaper yourself

Delete template?

Save as template?