PROFURL IN-BOOM REEFING SYSTEM

MK 0RPhoto FPhoto GIII.5.D – Position then this foil section so as it rise to the surface to theextremity part of the luff line in the lower part of the luff triangle (15) (Picture H). Cutsurplus foil section (16) exceeding on upper part : it end would have to respectivelyraise the high end of the luff triangle (Picture I). Burr the cut (Picture J).Photo H Photo I Photo JIII.5.E – Feeder fitting : Most of the time the front part of the feeder (10) willhave to be recur (Picture K). The feeder will have to be shortened so as been the lufftriangle (15). The cut will be done according the appropriate groove (closest uppergroove) so as to the drawing 2 arrangement.Drawing 210