PROFURL IN-BOOM REEFING SYSTEM

MK 0RDrawing 10IV.7 – Tie a knot on the lashing line (4 mm diameter supplied) and insert theknots in the slot of the mandrel (11F) so as to include the clew webbing and thebuckle created. (Picture AA) The length between the two knot of the reef point so asthe mainsail luff line set out with the feeder entry (10).Picture AAIV.8 - Lash the Ø4 (5/32‟‟) line between the clew webbing and the ring of theclew pin (4) and adjust foot tension. Check to tie or cut any loose extra length oflashing line.IV.9 - Insert the battens into the batten pockets.IV.10 - Attach the halyard onto the head of the mainsail.IV.11 – Insert the mainsail luff line into the feeder and pull it up.22