www .janitza.com

UMG 508VoltageDropA drop in voltage is set in % of the nominal voltage.OvervoltageThe overvoltage is set in % of the nominal voltage.CurrentOvercurrentThe rapid increase of current is set in % of thenominal current.Accept L2-L4Monitoring of events can be set per phase. Youcan accept settings from phase L1 into phasesL2, L3 and L4.• No- Settings from phase L1 arenottaken overinto phases L2, L3 and L4.• Yes- The settings from phase L1 are takenover into phases L2, L3 and L4.CPreparationCtimeThe preparation time can only be setwith GridVis.Factory pre-setting: 0Follow-up timeThe follow-up time can only be set withGridVis.Factory pre-setting: 057