210-4 Range Control SOP Apr 01

More documents

Recommendations

Info

FLORIDA NATIONAL GUARDCAMP BLANDING TRAINING SITE210-5 RANGE CONTROL STANDARD OPERATION PROCEDURESCHAPTER 4Communications4.1 Standards4.1.1 Any organization or unit using the Camp Blanding Training Site will maintaincommunications with Range Control as per guidance provided at training area safety briefing orthe range safety briefings.4.1.2 Radio Procedures: Standard Military Radio Procedures will be used and enforced by allorganizations and units when using the CBTS facilities.4.1.3 Radio Equipment: Any organization or unit requiring support of radio equipment for livefire ranges must identify their requirements no less than 45 days in advance of the utilizationdate. See Chapter 7, for request procedures.4.2 Range and Training Lands Program (RTLP) Communications System4.2.1 The RTLP communications system allows for the use of VHF and/or FMcommunications through the RTLP Repeater System.4.2.2 Range Control Repeater Systems and Frequencies are to be used for Range Controlcommunications only and will not be used for any other purpose unless authorized by RangeControl.4.2.3 Channel Utilization: Channels 1 through 6 are reserved for CBTS. Channels 1, 4 and 5will not be programmed and are for Range Control utilization. Channels 2, 3, and 6 may beprogrammed in accordance with Range Control's established frequencies. Channel 6, is thestate wide emergency medical channel. Organizations/Units should program this channel fordirect communications to medical aircraft. This channel is only to be used when authorized byRange Control. Channels 7 and higher are reserved for organization and unit internal usage.4.2.4 FM Frequency: 47.05 FM will be used for communications between the Training Areaand Range Control. Do not use the FM frequency for Live Fire Operations (ranges)communications. This net is designed for military FM radio systems to communicate withRange Control. This frequency will not communicate with hand held to hand held or hand heldto Range Control.4.2.5 VHF Frequency: The VHF frequency Channel 3 on handheld radios will be used for LiveFire Operations (ranges) only regardless of type range used. This nets function is to talk handheld to Range Control and hand held to hand held.4.2.6 Unit AN/PRC 127's are authorized for use in accordance with Range Control establishedprocedures and frequencies.CBTS 210-5 Range Control Standard Operating ProceduresRevision Date: 01 Oct 2001Page - 22 -
FLORIDA NATIONAL GUARDCAMP BLANDING TRAINING SITE210-5 RANGE CONTROL STANDARD OPERATION PROCEDURES4.2.7 Organization/Unit will program any organic VHF radios to be used at CBTS inaccordance with Range Control established frequencies. If other radio repeaters are placed onCBTS, Range Control will not monitor those frequencies. Unit's must contract Range ControlIAW this SOP.4.2.8 SINGARS radios communications with Range Control will be performed in the singlechannel non-secure mode.4.3 Authorized Frequencies FM: All organizations and units not conducting Live fire Operationswill communicate with Range Control on FM 47.05. Internal unit frequency requirements must becoordinated with the CBTS telephone officer.4.3.1 UHF Frequency - 277.454.3.2 VHF Frequency - 123.0 and 141.5.CBTS 210-5 Range Control Standard Operating ProceduresRevision Date: 01 Oct 2001Page - 23 -
Page 1 and 2: FLORIDA NATIONAL GUARDCAMP BLANDING
Page 21: FLORIDA NATIONAL GUARDCAMP BLANDING

210-4 Range Control SOP Apr 01

Create successful ePaper yourself

Delete template?

Save as template?