210-4 Range Control SOP Apr 01

FLORIDA NATIONAL GUARDCAMP BLANDING TRAINING SITE210-5 RANGE CONTROL STANDARD OPERATION PROCEDURESCHAPTER 7Plans and Training Division (PTD) Warehouse Standard Operating Procedures (SOP)7.1 PURPOSE:To establish procedures for the requisition and issue/return of training aids, radios, tactical targetry andtactical range layouts, from PTD Warehouse/Range Maintenance.7.2 APPLICABILITY:All Active Duty, National Guard, Air Guard, Reserve, Federal, State, City Law Enforcement agencies, andany other organization requesting training aids or equipment from PTD Warehouse/Range Maintenance.7.3 RESPONSIBILITY:All unit commanders and supply representatives, group leaders and group logistic personnel have the directresponsibility to ensure the procedures in this SOP are followed when requesting, receiving and turning inPTD property or materials.7.4 PTD RESPONSIBILITIES:PTD Warehouse/Range Maintenance has the responsibility for the following:7.4.1 Approving request for the use of all training aids, i.e. (Multi-Integrated Laser EngagementSystems (MILES), Weaponeer Trainer, Engagement Skills Trainer (EST) and all targetry-relatedequipment/materials.)7.4.2 Controlling the issue/turn-in of MILES, CTF, Weaponeer Trainer, hand-held radios, rangepaddles, staple guns, headsets, targets and/or any related training aids.7.4.3 Fabricating, installing and maintaining standard and tactical targetry for ranges at CampBlanding Training Facility (CBTS).7.5 PROCEDURES:All military and non-military organizations requesting training aids, equipment and materials shall followthe procedures listed below:7.5.1 All units and organizations performing training on post must have their CBTS post packet signedby an Authorized Range Maintenance representative prior to any training aids, radios, equipment ormaterials being issued.CBTS 210-5 Range Control Standard Operating ProceduresRevision Date: 01 Oct 2001Page - 29 -