Wadkin PP Panel Dimension Saw Manual and Parts List

Waakin OPERATINGANDMAINTENANCEINSTRUCTIONSTWO-KNIFE WEDGE TYPE CIRCULARCUTTERBLOCK, PLAIN BORE, Q. R. TYPE.8" dia. x 15/16" thick x 1~" bore, Part No.QR.16.These cut t e r b 10 c k s aredesigned to take 5/32" up to~" thick cutters: this permitstungsten car bid e tip pe d-t---f--t-i--+- cutters to be supplied whennecessary.The cutters can be used formouldings requiring not morethan !" cutter projection whenLlsing tIt thick cutters.Our standard VZ range ofcutter s can be used in thesecutterblocks, also existingWhitehill head cutters.See Section D Tools Catalogue.mGH SPEED STEEL INSERTED TOOTHGROOVING SAWS.c~q:i ::::::: =:J,When enquiring please givewidth and maximum depth ofcut required. These saws areused for accurate high gradework. They are fairlyexpensiveand require good handling.They are available in sizesfrom 10" to 12" diameter,and in varying widths on cut.See Section A Tools CataloguePage 134. 1/16" SQUARE 1~" BORE DOVETAIL CUTTER­BLOCKS. 2" LONG.m-,illDJ'lII IThese cutterblocks are used forlonger runs, cutters working inpairs; several pairs may be mountedon a single block to bUild up mould.The cutters on these cutterblockshave. a very good cuttillg angle. Theyare l" thick and are securely heldby dovetail bolts. It is thereforepossible to have a large overhangallowing deep moulds to be workedwith safety.A limited range of Tungsten CarbideTipped cutters are available. Shapedcutters can be provided to specialorder.For standard cutters see Section Cof our Tools and Sundries Catalogue.HEAVY TYPE WOBBLE SAW UNIT ON SCREWEDSLEEVEIIiIiJ1Once set, the saw and collarsremain tightly locked on sleeve.This type may be set and keptat its setting when not on machine.It is a self-contained unit.A special spindle locknut is EUppliedwith this unit.www.wadkin.com12" Diam. ~"to 2i" groovesinfo@wadkin.comSee Section A Tools Catalogue