Harmonic detection and filtering - Schneider Electric

Harmonic-management solutionsfrom Schneider ElectricEn brefSchneider Electric offers a completerange of harmonic-managementservices:b expert analysisb measurement and surveillancedevicesb filters.9.1 Analysis and diagnosisfrom Schneider ElectricSelection of the best solution, from both the technical and economic point of view,requires an in-depth study of the installation.MV and LV diagnosisWhen an expert from a Schneider Electric CEAT unit is called in, the user isguaranteed that the proposed solution will be effective (e.g. a guaranteed maximumTHDu level).The harmonic analysis and diagnosis are carried out by an engineer specialised inthe field of disturbances in electrical distribution systems and equipped with powerfulanalysis and simulation equipment.The service provided by Schneider Electric is divided into steps:b measurement of disturbances, in current and in phase-to-neutral and phase-tophasevoltages, on the disturbing loads, on the disturbed outgoing circuits and thepower sourcesb a computer model of the measured phenomena is created, providing a preciseexplanation of their causes and optimised selection of the possible solutionsb a complete report is drawn up, indicating:v the measured levels of disturbancev the maximum permissible levels of disturbance (IEC 61000, IEC 60034, etc.)b the performance of the selected solutions is guaranteedb the final solution is implemented, using the selected equipment and systems.The entire service is certified ISO 9002.To facilitate on-site expert analysis, Schneider Electricproposes a portable version of the CM4000-4000TDB105093DB105103Portable CM4000.Portable CM4000 in action.Remote monitoring of electrical installations via Internetb analyses a consumption profile to control energy costsb monitors, identifies and anticipates installation failures.DB1050914848