Use and Care Manual - Home Depot

More documents

Recommendations

Info

8 • Completing Your Installation With a Bowl Light Fixture (Continued)8-6. Connect the upper plug connector from the fan to the lower plugconnector in the light fixture.Note: Both plug connectors are polarized and will only fit togetherone way. Make sure the connectors are properly aligned beforeconnecting them. Incorrect connection could cause improperoperation and damage to the product.8-7. Partially install two housing assembly screws into the shroud.8-8. Slide the keyhole slots in the light fixture into the partiallyinstalled screws. Turn the light kit counter-clockwise until thescrews are nestled in the narrow ends of the keyhole slots.8-9. Install a third housing assembly screw into the remaining screwhole in the light fixture. Securely tighten all three screws.CAUTION: Make sure the shroud is securely attached to theswitch housing mounting plate. Failure to properly attach andtighten all three assembly screws could result in the switch housingand light fixture falling.Step 8-7HousingAssemblyScrewNote: In compliance with US federal energy regulations, thisceiling fan contains a device that restricts its light output.Exceeding the wattage limit marked on the MAX wattagesticker affixed to the light socket(s) may result in fire hazardor improper operation.1442486-01 • 03/06/12 • Hunter Fan Company
8 • Completing Your Installation With a Bowl Light Fixture (Continued)8-10. Install the included bulbs (40W max).8-11. Hold the glass bowl up so it fits in the shroud.8-12. Hold the cover plate up to the bottom of the glassbowl and secure them both by screwing the finial intothe threaded rod on the bottom of the light fixture.8-13. Attach the extra pull chains with pendants (included)to the light and fan pull chains using the breakawayconnector. (You may find the breakaway connectoron the end of the extra chains.)Step 8-10BreakawayConnectorSteps 8-10 – 8-111542486-01 • 03/06/12 • Hunter Fan Company
Page 2: WelcomeYour new Hunter® ceiling fa
Page 7 and 8: 2 • Installing the Ceiling PlateC
Page 9 and 10: 4 • Setting the Remote Transmitte
Page 11 and 12: 6 • Installing the Canopy and Can
Page 13: 8 • Completing Your Installation
Page 17 and 18: 10 • Operating and Cleaning Your

Use and Care Manual - Home Depot

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?