to download the ControlMaster series standard manual in PDF format

More documents

Recommendations

Info

ControlMaster CM10, CM30 and CM50Universal process controllers 1 /8, 1 /4 and 1 /2 DIN6 Basic Level…Basic / …Loop 1 Mot ValveDeadbandExample: If the valve is set to be driven to the 50 % open position and the deadband is set to4 %, the motor stops driving when the position feedback is 48 %. The deadband is between48 % and 52 %.Position %Required Valve PositionDeadband(centred aroundrequired position)Travel TimeFor motorized valve without feedback (see page 32), this parameter is used to control the valvemovement.For motorized valve with feedback (see page 32), the time entered is compared with the actualvalve movement. If the valve is sticking, a diagnostic message is generated (set Travel Time to0 s to disable this feature).34 IM/CM/S–EN Rev. C
ControlMaster CM10, CM30 and CM50Universal process controllers 1 /8, 1 /4 and 1 /2 DIN6 Basic Level…BasicLoop 1 Time Prop The active time of the output pulse is proportional to the value of the control output. With 100%output the pulse is active for the complete cycle time, for example:Note. Applicable only if Output Type is Time Prop or Split Output (and one output is a relay or adigital output) – see page 36.5 s 5 s 1 s 9 s 9 s 1 s50 % Output 10 % Output 90 % OutputCycle Time= 10 sCycle Time= 10 sCycle Time= 10 sCycle Time 1 (2)Alarm 1 (8)TripThe cycle time to be used with time proportioning outputs. For split outputs, the Cycle Time 1 setting applies to Output 1 and Cycle Time 2 setting appliesto Output 2.The alarm trip level in engineering units. See Process Alarm (page 64) for parameter details.IM/CM/S–EN Rev. C 35
Page 1 and 2: User Guide - Standard Functionality
Page 3 and 4: ControlMaster CM10, CM30 and CM50Un
Page 13 and 14: AControlMaster CM10, CM30 and CM50U
Page 35: ControlMaster CM10, CM30 and CM50Un
Page 87 and 88:
ControlMaster CM10, CM30 and CM50Un
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Refer to Section 7.5, page 63MenuPr
show all

to download the ControlMaster series standard manual in PDF format

Create successful ePaper yourself

Delete template?

Save as template?