to download the ControlMaster series standard manual in PDF format

ControlMaster CM10, CM30 and CM50Universal process controllers 1 /8, 1 /4 and 1 /2 DIN2 Introduction1.3 Health & Safety 2 IntroductionThis manual provides details for the ControlMaster Health and SafetyTo ensure that our products are safe and without risk to health,the following points must be noted:• The relevant sections of these instructions must be readcarefully before proceeding.• Warning labels on containers and packages must beobserved.• Installation, operation, maintenance and servicing mustbe carried out only by suitably trained personnel and inaccordance with the information given.• Normal safety precautions must be taken to avoid thepossibility of an accident occurring when operating inconditions of high pressure and / or temperature.Safety advice concerning the use of the equipment described inthis manual or any relevant hazard data sheets (where applicable)may be obtained from the Company, together with servicing andspares information.CM10 ( 1 /8 DIN), CM30 ( 1 /4 DIN) and CM50 ( 1 /4 DIN)controllers with Standard functionality.Note.• Read all relevant sections of this guide before configuring thesystem or modifying system parameters.• Install and use associated equipment in accordance with therelevant national and local standards.• System configuration must be carried out only by users orpersonnel with approved access rights (user privileges).2.1 EC Directive 89 / 336 / EECIn order to meet the requirements of the EC Directive 89/336/EEC for EMC regulations, this product must not be used in anon-industrial environment.2.2 End of Life DisposalControllers with Standard functionality contain a small lithiumbattery that must be removed and disposed of responsibly inaccordance with local environmental regulations.4 IM/CM/S–EN Rev. C