**S2-125 내지060930

(2) Disassemble a headlight socket bypulling it out.(3) Disassemble the rubber cover.(4) Loosen the steel wire, and disassemblethe head light bulb.HEADLIGHT BULB: 12V 55WAdjust headlight illumination angle byturning an adjusting bolt on a headlight.(Use type screwdriver.)(1) Adjust the upper/lower by turning thescrew on outside.(2) Adjust the right/left by turning thescrew on inside.CAUTIONIllumination angle adjusted incorrectlymay dazzle a facing driver's eyes orresult in difficulty to show the forward.(1) Loosen 2 tapping screws to disassembletail light lens.(2) Press a bulb with a light force and rotateit to counterclockwise to disassemble it.(3) Replace it with new bulb. Apply reverseorder of disassembly for assembly.TAIL/STOP LIGHT BULB : 12V 21/5W(5) Replace with new bulb.(6) Install in the reverse order of remover.CAUTIONWhen disassembling, care is to be takenfor ensuring that a tail light lens can notbe damaged.When replacing a tail light lens, be sureto assemble lens seal securely.29