iTools Help Manual - Eurotherm Ltda

iTOOLS VERSION 6.20: HELP MANUAL4 Flash memory4.1 Flash Memory EditorNot all devices are fitted with flash memory.The Flash Memory Editor is available to some devices to allow the editing of five tabbed lists that require anextra step in order to block-write the parameters' values to flash memory.As can be seen from the figures below, the five lists are entitled: Message Table, Message Table Config, PromoteParameters, Recipe Definition and Recipe Names. Of these, Message Table, Message Table Config and PromoteParameters have a user interface which is dedicated to the lists. The other lists are displayed using the standardiTools grid, as used by the Parameter Explorer, for example, and are not discussed further here.4.1.1 Message TableThe message table contains a list of up to 15 items, each of which defines the message that is to appear if thespecified parameter's value satisfies a specified condition. The Flash Memory Editor tool bar or Flash menuitems are used to insert, delete, reorder etc. the messages.Once editing is complete, the new list is downloaded to the device by means of the 'Update device flashmemory' tool button, the 'Update Device Flash' item in the 'Flash' menu, or by using the shortcut + . In allcases, a confirmation message appears before download is carried out. The user is prompted to download if anattempt is made to close the editor without downloading.Message table items are displayed in a read-only grid: editing is performed using the control windows below themessage table.HA028838 Page 15Issue 2 Jly 05