iTools Help Manual - Eurotherm Ltda

iTOOLS VERSION 6.20: HELP MANUAL10 Toolkit Blocks View10.1 Toolkit BlocksOpened by the Toolkit Blocks Views toolbar tool, by the Toolkit Blocks View menu item or via the context menuwhich appears when the selected device faceplate (in Panel Views) is right-clicked. Toolkit blocks simplifiesproduction of applications by allowing wiring links to be made by 'dragging and dropping' parameters.Note: The displays vary from device to deviceThe window has three or, as shown below, four tabs viz: User Values, Analog operations, Logic operations, BlockWiring. The Block Wiring tab can be enabled or disabled for view using the 'Toolkit Blocks Performance' item inthe Options menu.10.1.1 User ValuesUser values are intended for use as constants or comms inputs to calculations.In the example above, the user value to be edited is selected by clicking on the down arrow and selecting therequired User_Value. For other instruments, only the value can be edited and the page contains a list of all thesupported UserVals.Items are edited either by clicking on the value or comment area and typing in the required value, or selectingthe required entry from a picklist displayed by clicking on the down arrow at the right-hand end of the relevantfield.HA028838 Page 37Issue 2 Jly 05