iTools Help Manual - Eurotherm Ltda

iTOOLS VERSION 6.20: HELP MANUALCREATING A DATA SETAll the parameters required for the recipe should be added to the watch list, described above.Once this has been done, if the empty data set is selected (by clicking on the column header), the 'Snapshot'tool button can be used to fill the data set with the current values. Alternatively, the 'Snapshot Values'item in the Recipe or context (right click) menu or the shortcut + can be used to fill the data set.Individual data values can now be edited by typing directly into the grid cells. Data values can be left blank orcleared, in which case, when the recipe is downloaded, no value will be written for those values. Data values canbe cleared by deleting all the characters in the field, then, either moving to a new cell, or typing .The set is called 'Set 1' by default. The name can be edited by using the 'Rename Data Set...' item in the Recipeor right mouse-click menu, or by using the shortcut + .New data sets can be added and edited in the same way, by using the 'Create a new empty....' tool button ,or by selecting the 'New Data Set' item in the Recipe or right mouse-click menu, or by using the shortcut +Once all the data sets required for the Recipe have been created, and saved, they can be downloaded to thedevice, one at a time, using the download tool , or equivalent Recipe/context menu item, or the shortcut + .For descriptions of other tool buttons, see 'Watch/Recipe toolbar'. For descriptions of Recipe menu items, see'Recipe Menu (Watch/Recipe)'.HA028838 Page 21Issue 2 Jly 05