Covered Task - Kinder Morgan

More documents

Recommendations

Info

C. Be able to recognize and respond to abnormal operating conditions that might be encountered when performing this covered task.102.10 Atmospheric corrosion – surface preparationA. Surface preparation1. Be aware of Company policies for safe work permitting.2. Be able to remove existing coating and/or prepare surface to be coated including the selection of the proper equipment3. Be aware of company requirements for inspection of pipe for damage and corrosion.4. Be aware of OQ qualification requirements to inspect atmospheric coatings (Covered Task 102.09)B. Be able to recognize and respond to abnormal operating conditions that might be encountered when performing this covered task.102.11 Atmospheric corrosion – application of coatingsA. Application of atmospheric coatings (Manufacture’s Specs)1. Be aware of OQ requirements for surface preparation for prevention of atmospheric corrosion (Covered Task 102.10)2. Have knowledge of the company-approved coatings available3. Be able to select the proper coating system for atmospheric applications4. Know where to find and be able to follow the proper steps for applying coating systems, including use of primers5. Be aware of OQ qualification requirements for inspection of coatings (Covered Task 102.09)B. Be able to recognize and respond to abnormal operating conditions that might be encountered when performing this covered task.102.12 reserved for future use102.13 External coatings on buried or submerged components - application and repairA. Surface Preparation1. Be able to properly remove existing pipe coating, without damage to the underlying pipe material.2. Be able to properly clean and prepare the pipe to repair coating.3. Be aware of OQ qualification requirements to inspect buried pipe (Covered Task 104.01).4. Be aware of OQ qualification requirements for measurement of damage on pipe. (Covered Task 104.02)5. Be able to document inspection on appropriate pipeline inspection/modification forms and reports.B. Application and repair of external coatings on buried or submerged components (Manufacturer’s instructions)1. Have knowledge of the Company-approved coating repair materials available and which coating repair material is compatible with the existing coating beingrepaired.2. Know where to find and be able to follow the proper steps for applying coating systems, including use of primers3. Be able to properly apply repair coating to defective area.4. Be able to test and inspect for proper application of that coating repair material5. Be aware of and use the proper pipeline inspection/modification forms and reports.C. Be able to recognize and respond to abnormal operating conditions that might be encountered when performing this covered task.Page 12 of 33
102.14 Cathodic protection remediationA. Install bonds and/or bond provision (NACE Std RP0177 & RP0286)1. Be aware of OQ qualification requirement for the correct method to make a connection to the pipeline/structure (Covered Task 102.04)2. Be able to select and use the proper instrumentation, test leads, and half-cell.3. Be aware of OQ qualification requirements for measurement of structure-to-soil potentials. (Covered Task 102.01).4. Be able to measure other readings as required.B. Install anode (NACE RP0169, RP0572, RP0285, RP0193, & TM0497)1. Be able to select and use the proper instrumentation, test leads, and half-cell.2. Be aware of OQ qualification requirements for measurement of structure-to-soil potentials. (Covered Task 102.01).3. Be able to measure other readings as required.4. Be aware of OQ qualification requirements to properly make an electrical connection to the pipeline/structure (Covered Task 102.04).5. Be aware of OQ qualification requirements to properly install an electrical test lead (Covered Task 102.04)C. Install rectifiers (NACE RP0169, RP0572, RP0285, RP0193, & TM0497)1. Be aware of OQ qualification requirement for making an electrical test lead connection to the structure. (Covered Task 102.04)2. Be aware of OQ qualification requirements to perform required interference testing. (Covered Task 102.02)3. Be aware of OQ qualification requirements to adjust rectifier. (Covered Task 102.07)D. Remediation of casings shorted to the pipeline (NACE RP0169, RP0572, RP0285, RP0193, & TM0497)1. Be aware of OQ qualification requirements for measurement of structure-to-soil potentials. (Covered Task 102.01).2. Be able to measure other readings as required3. Be aware of OQ qualification requirements to check an electrical test station for electrical continuity (shorted wires). (Covered Task 102.04)4. Be aware of OQ qualification requirements for properly repairing or installing an electrical test station (Covered Task 102.04)5. If short is not in test leads, have knowledge of the various alternatives for monitoring/repair and have the knowledge and skill to select the most cost effectivealternative.6. Be aware of OQ qualification requirements for moving in-service pipe (Covered Task 104.08)E. Be able to recognize and respond to abnormal operating conditions that might be encountered when performing this covered task.102.15 Internal corrosion – control injection rateA. Control injection rate of inhibitor (MSDS sheets; manufacturer’s instructions)1. Have knowledge of Material Safety Data Sheet (MSDS) for the specific corrosion inhibitor used.2. Be aware that pump injection rates are a function of pump speed and pump volume, both of which can be adjusted on most injection pumps.3. Be aware of OQ qualification requirements to monitor injection rate (Covered Task 102.16)4. Have knowledge of which products on a specific pipeline into which inhibitor is injected.B. Be able to recognize and respond to abnormal operating conditions that might be encountered when performing this covered task.102.16 Internal corrosion – monitor injection rateA. Monitor injection rate of inhibitor (manufacturer’s instructions)1. Have knowledge of Material Safety Data Sheet (MSDS) for specific corrosion inhibitor used.2. Be able to read the flow measurement device in order to monitor product injection rate3. Be aware of amount of inhibitor on hand and have capability to calculate when inhibitor will need to be replenished at current injection rate.Page 13 of 33
Page 1 and 2: Appendix BKinder Morgan Operator Qu
Page 8 and 9: Detailed Covered Task Descriptions1
Page 10 and 11: Page 10 of 33
Page 14 and 15: B. Be able to recognize and respond
Page 16 and 17: E. Be able to recognize and respond
Page 18 and 19: 104.01 Inspect buried pipe when exp
Page 20 and 21: 2. Be able to visually identify lea
Page 22 and 23: E. Be aware of manufacturer’s ins
Page 24 and 25: G. Be able to have all required equ
Page 26 and 27: 104.23 Temporary marking of Pipelin
Page 28 and 29: E. Be able to recognize and respond
Page 30 and 31: 1. Be able to isolate the launcher/
Page 32 and 33: B. Be able to identify type, manufa

Covered Task - Kinder Morgan

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?