<strong>Ethernet</strong> & Multi-Service over PDH/SDH/SONETGM-E | Fast <strong>Ethernet</strong> over PDH E3LAN connectivity <strong>to</strong> E3/T3 data ratesProduct Specifications| 10/100BaseTx interface port with au<strong>to</strong>-negotiation & au<strong>to</strong>-crossing| VLAN support according <strong>to</strong> 802.1q| VT100 management port and additional 10/100BaseTx managementport for TELNET and SNMP management| In-band management of the remote unit| FTP software upload| E3/T3 transmission distance up <strong>to</strong> 100 m (4 dB budget)| 3U rack mount card or standalone unit| Cost effective <strong>Ethernet</strong> <strong>to</strong> E3/T3 conversion| Connect LANs via high speed SDH networks| VLAN support according <strong>to</strong> 802.1q| Various management facilities| Available as rack mount card or standalone device| Direct connection of LANs of two locations <strong>to</strong> save time and moneyGM-EData RateInterface PortInterfaceConnec<strong>to</strong>rLine PortInterfaceDistance / Budget (max)Connec<strong>to</strong>rCodingFeaturesIntegrated BridgeAu<strong>to</strong> Speed NegotiationAu<strong>to</strong>-SensingManagementPower SupplyCertificationMechanicsRack Mount CardDimensions (H x W x D)10/100 Mbps10/100BaseTxRJ45E3/T3 (switchable)up <strong>to</strong> 100 m / 4 dBBNCHDLCYes (with VLAN support)YesYesVT100/SNMP, Telnet230/115 VAC, 48/24 VDCCE, UL3U30 x 130 x 190 mmOrder MatrixGM-EFast <strong>Ethernet</strong> over PDH E310/100 BaseT Interface Converter for E3/T3, au<strong>to</strong>negotiation acc. IEEE 802.3u, Rack mount cardOperation Mode Functional Extensions Line Port Specification Line Connec<strong>to</strong>r Interface Specification Interface Connec<strong>to</strong>r Art.No. Short NameG.703 E3, 34.368 MbpsG.703 T3, 44.736 MbpsTelnet Control Port (RJ45)G.703 E3/T3BNC<strong>Ethernet</strong> Twisted Pair, 10/100 BaseTRJ45x x x x x x x 2820-001 GM-E/GBSR-R22
<strong>Ethernet</strong> & Multi-Service over PDH/SDH/SONETINV-MUX-E | 8-channel Inverse E1 MultiplexerInverse Multiplexer for PDH/SDH Networks and WAN-IP Switch with routing functionalitiesProduct Specifications| Four Layer-2-Switched Fast <strong>Ethernet</strong> Ports with VLAN-Support| Eight E1/T1 Links (Bridged or IP-Routed) with up <strong>to</strong> 248 logicalchannels| Inverse Multiplexing using Multilink-PPP Bridging via one logical link| IP routing with RIP, RIPv2 and OSPF over multiple logical links| IP filter for firewall support, IP accounting, Authentication (PAP,CHAP, RADIUS)| Inverse Multiplexer for PDH/SDH networks| Subscriber link with flexible bandwidth allocation| Access concentra<strong>to</strong>r for network connections| Four E1/T1 Links, bridged or IP-routed| Can be used as an IP-RouterINV-MUX-EData Rate<strong>Ethernet</strong> Interface Port<strong>Ethernet</strong>Connec<strong>to</strong>rComplianceE1/T1 Interface PortE1/T1 (DS-1) InterfaceConnec<strong>to</strong>rLine CodingOutput ImpedanceJitter PerformanceFraming StructureBandwith per logicalchannelFeaturesIP RoutingBridgingLink Pro<strong>to</strong>colSecurity & FirewallManagementPower SupplyElectrical SafetyCertificationsMechanicsRack VersionDimensions (H x W x D)4 x 10/100 Mbps8 x 2.048/1.544 Mbps (E1/T1)4x 10/100BaseTX,half/full duplex, au<strong>to</strong> negotiation, au<strong>to</strong> sensingRJ45IEEE 802.3, 802.3I, 802.3u8 x G.703/G.704RJ45 Connec<strong>to</strong>rHDB3 (E1), B8ZS (T1)120 Ohm balancedE1: ITU-T I.431, G.703, G.736, G.823T1: ITU-T I.431, G.703, G.824, AT&T TR 62411G.703, G.704E1: 64 kbps – 1.984 Mbps or 2.048 MbpsT1: 64 kbps – 1.536 Mbps or 1.544 MbpsIP pro<strong>to</strong>cols: IP, ICMP, ARPRouting pro<strong>to</strong>cols: RIP, RIP-2, OSPF,static routing, NAT, IP unnumberedTransparent Bridging, VLANPPP, ISDNPAP/CHAP authentication within PPP,IP security, IP masquerading, IP filtering,IP/ISDN accounting, Access control list & password,Authentication via RADIUS pro<strong>to</strong>colOutband Management (via RS232)via Telnet or TFTP with access controlSNMPv1 with access control100...250VAC 50...60 Hz, 36…72VDCEN 60950CE19” 1U44 x 432 x 250 mmOrder MatrixINV-MUX-EInverse Multiplexer for PDH/SDH Networks8 x E1/T1 and 4 x 10/100 BaseTx Interfaces with bridging and routing functionalityProductDesignOperationModeFunctionalExtensionsLine PortSpecificationLine PortConnec<strong>to</strong>rUser PortPro<strong>to</strong>colUser PortConnec<strong>to</strong>rPowerSupplyArt.No.Short NameStandalone UnitG.703 E1, 2.048 MbpsG.703 T1, 1.544 MbpsControl PortTelnet / TFTPSNMPE1/T1 (ITU G.703)RJ45 (8x)10/100 BaseT (IEEE 802.3)RJ45 (4x)230 V AC48 V DCx x x x x x x x x 4701-003 INV-MUX-8-E/Ex x x x x x x x x 4701-004 INV-MUX-8-E/V23