<strong>Last</strong> <strong>Mile</strong> | TDM AccessET-CA | Copper/Fiber Fast <strong>Ethernet</strong> Switch and ConverterThe ideal Combination of switching & conversion in<strong>to</strong> an <strong>Optical</strong> SignalProduct Specifications| Up <strong>to</strong> 4 ports 10/100BaseTx with au<strong>to</strong>-sensing, au<strong>to</strong>-crossover(MDI/MDIX) & full/half duplex detection| Up <strong>to</strong> 2 ports 100BaseFX with SFP interface| Redundancy for the line ports| SFP transceiver for short, long haul and WDM applications available| SNMP Agent on-board| Secure configuration via SSHv2 (Secure Shell) terminal| <strong>Ethernet</strong> converter or multi-port switch| Tamper-proof bandwidth limitation per port in steps of 1Mbps| VLAN support including double tagging (QinQ) per port| Permanent remote in-band management| Performance moni<strong>to</strong>ring on all ports| Remote flash software update| 1:1 optical redundancy| Rack mount card (3U) with up <strong>to</strong> 6 <strong>Ethernet</strong> portsCopper User PortsPort densityInterfaceConnec<strong>to</strong>rAu<strong>to</strong>-SensingAu<strong>to</strong>-Crossing (MDI / MDIX)Fiber Optic PortsPort densityInterfaceConnec<strong>to</strong>rWavelengthsFeaturesManagement AccessManagement PortIn-band ManagementRemote Flash UpdateBandwidth LimitationPerformance Moni<strong>to</strong>ringDHCP Client SupportVLAN SupportSupported MAC AddressesMaximum Packet SizeLPT/RFD SupportSingle Fiber Solution (WDM)Power ConsumptionPower SupplyMechanicsRack Mount CardDimensions (H x W x D)2 or 410/100BaseTx (full/half duplex)RJ45YesYes1 or 2SFP Modules (100BaseFX)LCe.g. 1310nm MM/SM, 1550nm SM, WDM)SNMPv.1, Telnet/SSH, VT100 via MACS4000 agent ortable-<strong>to</strong>p housingconfigurable <strong>to</strong> any copper or fiber optic portYesYestamper-proof in steps of 1 Mbps per portYesYes16 port based VLANs with tagging acc. IEEE802.1Q anddouble tagging (QinQ)40964032 ByteYesYes< 4W (3 port variant), < 6W (6 port variant)230/115V AC or 48V DC3U30 x 130 x 190 mmOrder MatrixET-CAAdvanced <strong>Ethernet</strong> ConverterManaged Switch, 10BaseT/100 BaseTX <strong>to</strong> 100BaseFX, 3U Rack-Mount-Card for MACS4000Port density Fiber Optic Copper Port Connec<strong>to</strong>r Art.No. Short Name1 FO Port and 2 Copper Ports2 FO Ports and 4 Copper PortsPluggable SFP Module SlotRJ-45x x x 5007-020 ETR-CA12/PSSR-3Rx x x 5007-220 ETR-CA24/PSSR-3RPlease order SFP modules separately.30
<strong>Last</strong> <strong>Mile</strong> | TDM AccessCOP-FE | Next Generation E1 Multiplexer over Fast <strong>Ethernet</strong>TDM Copper or Fiber Multiplexer for <strong>Ethernet</strong>, IP, MPLS or VLANProduct Specifications| Pro<strong>to</strong>col transparent data transmission for E1/T1| Data rates: 4 x E1/T1 (2.048/1.544 Mbps) plus 2 x 10/100BaseTX| Supports fractional (n x 64 kbps) and grooming services| External reference clock port| Increase the number of interfaces by cascading COP-FEs| Redundant copper or fiber optic interface on the line site, supportingseveral wavelengths| Management features like SNMP, Telnet & web-based GUI| Cost-effective extension of four traditional E1/T1 data interfacesplus two <strong>Ethernet</strong> interfaces over Packed Switched Networks (PSN)| Optimized use of packet based infrastructure| Supports <strong>Ethernet</strong>, IP, MPLS, VLAN and double VLAN tagging| Efficient use of existing bandwidth for legacy data via less expensivePSN| Enables Point-<strong>to</strong>-Point and Point-<strong>to</strong>-Multipoint applications| Supports QoS on different layers depending on the PSN type| Superior clock recoveryOrder MatrixLAN, <strong>Ethernet</strong> Interface PortBit rateComplianceMAC Address tableE1/T1 Interface PortBit rateLine CodingImpedanceJitter PerformanceComplianceFiber Optic SpecificationsSinglemode<strong>Ethernet</strong> Management PortBit RateConnec<strong>to</strong>rComplianceMAC Address tableFeaturesManagementQuality of Service (QoS)RedundancyCertificationHumidityOperating TemperaturePower SupplyConsumptionReference Clock PortReference clock rateComplianceMechanicsRack Mount CardStandalone UnitCompact 5U Version2 x 10/100BaseTX, au<strong>to</strong> negotiation, au<strong>to</strong> crossoverIEEE 802.1p, IEEE 802.1q , IEEE 802.3, IEEE 802.3u1k MAC addresses4 x 2.048/1.544 Mbps +/- 50/32 ppmHDB3 (E1), B8ZS, AMI (T1)120 Ohm (E1), 100 Ohm (T1)G.823, G.824, G.812 (Type VI),EN302 084, T1.101 (Stratum 4)G.703, G.704Budget/Distance1300 nm: 15b dB/ 15 km*4 x 10/100BaseTX or 2 x 10/100BaseT + 2 x 100BaseFXRJ45 or LC (SFF)IEEE 802.1p, IEEE 802.1q1k MAC addressesSNMP, Telnet and DHCP client functionality,web-based GUIAccording IEEE802.1p VLAN (priority field),priority labeling (ToS), MPLS labelConfigurableCE and UL approved10% - 90% non-condensed-5°C <strong>to</strong> 45°C110/230V AC or 48V DC< 12 W2048 kHzG.7036U45 x 285 x 240 mm (H x W x D)45 x 224 x 175 mm (H x W x D)COP-FECircuit Emula<strong>to</strong>r Over Packet switched Networks with Fast <strong>Ethernet</strong> LineAccess Multiplexer for voice and data transmission via <strong>Ethernet</strong>, MPLS or IP networksPort Density<strong>Ethernet</strong> TDM Mgmt.FunctionalExtensionDesign Art.No. Short Name100BaseFX, SFF (LC), 1300nm,Singlemode10/100BaseT, RJ45E1/T1-Interface, RJ45Reference Clock Port In- &Output, RJ4510/100BaseT, RJ45RS232, SUB-D9SNMP Agent on-boardRack Mount Card, 6UCompact Standalone Unit withexternal Power Supply, 5U1 1 1 x x x 4635-002 COPR-FE-111/DLSRGR-6R1 2 4 x x x x 4635-004 COPT-FE-124/9LSRGR-C-5U-W2 2 4 x x x 4635-101 COPR-FE-224/9LSRGR-C-M-6R4 4 x x x x 4635-204 COPT-FE-044/SRGR-C-5U-W2 1 x x x x 4635-205 COPT-FE-021/SRGR-C-5U-W2 2 4 x x x x TBD COPT-FE-224/9LSRGR-C-5U-WPlease order external power supplies separately (AC: 1755-007 PS-SM-W | DC: 1755-002 PS-SM-V).31