English Ethernet Solutions - from Optical to Last Mile Catalog 2006

Optical NetworkingYUMIX PSAC | AC Power SupplyAC power supply for YUMIX 4000E chassis provides overvoltage,overcurrent and overheating protection. Can be used alone or inredundant mode.| Input voltage (wide range) 100 - 240V| Input frequency: 50 – 60Hz| Redundant mode possible| Hot-pluggableYUMIX PSDC | DC Power SupplyDC power supply for YUMIX 4000E chassis provides overvoltage,overcurrent and overheating protection. Can be used alone or inredundant mode.| Input voltage 36 - 72V| Redundant mode possible| Hot-pluggableYUMIX EMCC & EACC | Management ModulesPandatel’s management card is designed for mounting into YUMIX4000E chassis. Management cards may be combined for implementingcascade connections. They are used for element and networkmanagement and allow the user to configure and access varioussettings for all modules present in a chassis. Furthermore a managementcard also runs Pandatel’s powerful network management software.It manages various hardware and network faults by continuouslycommunicating with all modules in a chassis over a dedicatedinternal bus and with other nodes in the network over the supervisorychannel. Network management is done electrically through Fast Ethernetports or optically through either one or two optical supervisoryports or via cross-connect and Line Card.Interfaces:| Fast Ethernet (Two independent auto-sensing RJ-45 ports, supportingIEEE802.3 10BaseT and IEEE802.3u 100BaseTx)| Modem (V.92/56K)| USB 1.1| Serial (Mini-USB socket)Option 1:| One or two optical supervisory interfacesOption 2:| Two more RJ-45 ports (cannot be combined with option 1)