Millathane® 76 Datasheet - TSE Industries, Inc.
Millathane® 76 Datasheet - TSE Industries, Inc.
Millathane® 76 Datasheet - TSE Industries, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TSE</strong> INDUSTRIES, INC.,MILLATHANE DIVISION PRODUCTS LIST:MILLATHANE ® 66MILLATHANE ® <strong>76</strong>MILLATHANE ® 97— A polyester-based millable polyurethane which is peroxide curable.— A polyester-based millable polyurethane which is sulfur or peroxide curable.— A transparent polyether-based millable polyurethane which is peroxide curable.MILLATHANE ® 5004 — A polyester polyurethane with excellent processing characteristics and can be easily injectionmolded and must be vulcanized with peroxide (formerly known as Vibrathane ® 5004)MILLATHANE ® CMMILLATHANE ® E34MILLATHANE ® HTCAYTUR ® 4THANECURE ® ZMTHANECURE ® T9CRYSTAL ® 1053CRYSTAL ® 2000CRYSTAL ® 4100CRYSTAL ® 7000— A polyether polyurethane rubber exhibiting outstanding low temperature properties andexcellent hydrolytic stability (formerly known as Adiprene ® CM).— A polyether-based millable polyurethane which is sulfur or peroxide curable.— A polyester-based millable polyurethane which is sulfur or peroxide curable and able towithstand elevated temperatures.— MBTS/zinc chloride activator for millable polyurethanes.— MBTS/zinc chloride activator for millable polyurethanes.— Dimeric 2,4-toluene diisocyanate can be used as vulcanization agent for polyurethane rubber;adhesion promoter for rubber to textile and PVC to textile bonding; as a cross linkingcomponent in heat activated one compound PUR elastomer systems, one componentadhesive systems and one component coatings which include automotive undercoats.— A semi-permanent mold release agent recommended for applications in rubber, composite,and thermoplastic molding. Excellent mold sealer and inhibits mold build-up.— A semi-permanent mold release agent used as a mold lubricant and recommended for slab dip,lubricating extruded goods and prevents water spotting in open steam cure.— A semi-permanent mold release agent used for applications in thermoplastic, epoxy,and urethane molding. Provides a high level of slip to the mold.— A semi-permanent mold release agent which allows a greater number of releases for urethaneintegral skin foam.<strong>TSE</strong> INDUSTRIES, INC. (800) 237-<strong>76</strong>34 MILLATHANE <strong>76</strong> 7/04 pg. 25
Change language