Pressure transducer P-2000
Pressure transducer P-2000
Pressure transducer P-2000
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
COPAL ELECTRONICSPRESSURE TRANSDUCERSP-<strong>2000</strong>INTERNAL STRUCTURE (BN type)13<strong>Pressure</strong>245Part nameMaterialFEATURES1HousingLCP (Liquid crystal polymer)● Compact and light weight● For non-corrosive gases● Dual in line package● <strong>Pressure</strong> range ~9.81, ~981 kPa {~0.1, ~10 kgf/cm 2 }234CoverSensor chipChip resistor (compensatory resistor)AluminumSiliconeCeramic5Terminal pinPhosphor bronze + Au-platedMODEL NUMBER DESIGNATIONP-<strong>2000</strong> - 501 G - 15 - BNSeries nameRated pressure range1010 ~ 9.81 kPa {0 ~ 0.1 kgf/cm 2 }5010 ~ 49.0 kPa {0 ~ 0.5 kgf/cm 2 }1020 ~ 98.1 kPa {0 ~ 1 kgf/cm 2 }3520 ~ 343 kPa {0 ~ 3.5 kgf/cm 2 }5020 ~ 490 kPa {0 ~ 5 kgf/cm 2 }7020 ~ 686 kPa {0 ~ 7 kgf/cm 2 }1030 ~ 981 kPa {0 ~ 10 kgf/cm 2 }Terminal directionANSame direction as the pressure portBNOpposite direction to the pressure portThermal error15± 0.15 % (± 0.12 %) F.S./°C<strong>Pressure</strong> referenceGGaugeLIST OF MODEL NUMBERSTerminaldirectionRated pressure rangekPa {kgf/cm 2 }0 ~ 9.81 0 ~ 49.0 0 ~ 98.1 0 ~ 343 0 ~ 490 0 ~ 686 0 ~ 981{0 ~ 0.1} {0 ~ 0.5} {0 ~ 1} {0 ~ 3.5} {0 ~ 5} {0 ~ 7} {0 ~ 10}ANBNA P-<strong>2000</strong>-101G-15-AN A P-<strong>2000</strong>-501G-15-AN A P-<strong>2000</strong>-102G-15-AN A P-<strong>2000</strong>-352G-15-AN A P-<strong>2000</strong>-502G-15-AN A P-<strong>2000</strong>-702G-15-AN A P-<strong>2000</strong>-103G-15-ANP-<strong>2000</strong>-101G-15-BN P-<strong>2000</strong>-501G-15-BN P-<strong>2000</strong>-102G-15-BN P-<strong>2000</strong>-352G-15-BN P-<strong>2000</strong>-502G-15-BN P-<strong>2000</strong>-702G-15-BN P-<strong>2000</strong>-103G-15-BNANAThe AN version, marked A is manufactured upon receipt of order basis. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONICSP-<strong>2000</strong>PRESSURE TRANSDUCERSSTANDARD SPECIFICATIONSK Unless otherwise specified, the specs are defined at an ambient temperature of 25±5 °C and excitation current of 1.5 mA DC.Item Model number<strong>Pressure</strong> referenceRated pressure range kPa {kgf/cm 2 }Maximum pressure kPa {kgf/cm 2 }Break-down pressure kPa {kgf/cm 2 }Operating temp. range°CP-<strong>2000</strong>101G 501G 102G 352G 502G 702G 103GGauge9.81 49.0 98.1 343 490 686 981{0.1} {0.5} {1.0} {3.5} {5} {7} {10.0}19.6 98.1 196 686 981 1373 1471{0.2} {1.0} {2.0} {7.0} {10} {14} {15.0}49.0 245 490 1030 1471 1961 1961{0.5} {2.5} {5} {10.5} {15} {20} {20}− 20 ~ 80General specificationsCompensated temp. rangeOperating humidityStorage temp.Bridge resistance°C%RH°CΩ0 ~ 5035 ~ 85No condensation− 20 ~ 80Atmospheric pressure, humidity 65 %RH maximum3300 ± 30 %<strong>Pressure</strong> mediumNon-corrosive gasesInsulation resistanceMΩminimum100 (500 V DC)Dielectric strength500 V AC, 60 sLeakage current 1 mA maximum<strong>Pressure</strong> portmmφ 3.2Net weightgApprox. 1Analog output PowerExcitation currentOffset voltageSpan voltageLinearity/HysteresisThermal error(Reference temp.: 25 °C)mA DCmVmV%F.S.ZERO%F.S./°CSPAN%F.S./°C1.5Constant current± 20 ± 1550 ± 20 90 ± 30± 0.3± 0.15 ± 0.12± 0.05 ± 0.04ResponsemsApprox. 1ENVIRONMENTAL CHARACTERISTICSTest item Test conditions (At 25 ± 5 °C) Permissible changeVibrationShock<strong>Pressure</strong> cycling10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s 2 ,3 directions for 2 hours each981 m/s 2 , 3 directions for 3 times each0 ~ Rated pressure, 10 6 cyclesOffset voltage/Span voltage:±1 %F.S. maximum eachMoisture resistance40 °C, 90 ~ 95 %RH, 240 hrs.P-<strong>2000</strong> series can be operated at the vacuum pressure. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONICSP-<strong>2000</strong>PRESSURE TRANSDUCERSOUTLINE DIMENSIONSBN typeUnless otherwise specified, tolerance : ± 0.3 (Unit: mm)101 2 3456<strong>Pressure</strong> portφ1.23.2 +0.10R10.5(t = 0.3)2.5 2.5PRESSURETRANSDUCERP-<strong>2000</strong>GCOPAL JAPANVent hole12φ7.3 5.2 3±0.5<strong>Pressure</strong> range markingAN typePRESSURETRANSDUCERP-<strong>2000</strong>GCOPAL JAPANVent hole<strong>Pressure</strong> range marking3.5±0.55.27.33.2 +0.10φ0.5(t = 0.3)2.5 2.5101 2 3<strong>Pressure</strong> portφ1.212456INTERNAL ELECTRICAL SCHEMATICSTERMINAL NUMBER6 2 (+)4 1RInput5 3 (–)(+)(–)OutputPin Connection1 Output C2 Input B3 Input C4 Output B5 Input C6 Input BR : Built-in chip resistor fortemp. compensation Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
Change language