INPUT / OUTPUT / POWER SUPPLY / COMMUNICATION modules

INPUT / OUTPUT / POWER SUPPLY /COMMUNICATION modules

MultiCon CMC I/O modulesIndexPower supply modulesPS3 ..................................... 5PS31 ..................................... 5PS42 ..................................... 5Input modulesuniversalcurrentvoltageUN3 ....................................... 6UN5 ....................................... 6I16 ......................................... 7I24 ......................................... 7IS6 ......................................... 7U16......................................... 9U24 ........................................ 9voltage-currentUI4 ......................................... 8UI8 ......................................... 8UI12 ....................................... 8thermocoupleRTDdigitalTC4 ......................................... 10TC8 ......................................... 10TC12 ....................................... 10RT4 ........................................ 11RT6 ........................................ 11D8 .......................................... 12D16 ........................................ 12D24 ........................................ 12universal countersCP2 ........................................ 13CP4 ........................................ 13hourmetersHM2 ....................................... 14HM4 ....................................... 14analogue flowmetersFI2 .......................................... 15FI4 .......................................... 15pulse flow or ratemetersFT2 ......................................... 16FT4 ......................................... 16Output modulescurrentSSRrelayIO2 ........................................... 17IO4 ........................................... 17IO6 ........................................... 17IO8 ........................................... 17S8 ............................................. 18S16 ........................................... 18S24 ........................................... 18R45 ........................................... 19R65 ........................................... 19R81 ........................................... 19R121 ......................................... 19Communication modulesETU .......................................... 20ACM ......................................... 20USB Host .................................. 202www.multicon24.eu

MultiCon CMC I/O modulesControllers, data recorders, HMIThe MultiCon series includes advanced controllers and data recorders with great potential closed in smallcasings. MultiCon CMC has been specifically designed for advanced applications in industrial automaticcontrol engineering. It does not mean, however, that the device cannot be applied in smaller systems.MultiCon CMC can be equipped with three isolated RS-485 interfaces which make it a perfect solution fordistributed systems to work as CPU. Thanks to Ethernet interface the device can be monitored via theInternet. A wide range of input and output modules allows to customize CMC precisely as the customerrequires it. Thanks to a colour touchscreen working with the user interface becomes a pleasure, whileMultiCon operation playing the role of HMI is intuitive and comfortable. Our devices are LINUX-basedproducts to ensure stable operation.TECHNICAL DATAThe biggest advantage of all devices from the MultiCon series is a big number of built-in inputs / outputs accessible inone compact device. The most developed version CMC-99 has up to 48 measurement or digital inputs and 60 virtualchannels whereas CMC-141 has 50% more inputs / outputs and virtual channels.Thanks to a well-thought-out module design you can choose among a wide range of modules and connect them toslots in the way you wish but you do not have to use all slots. You can also decide on your own how to use virtualchannels, if they are going to be used for direct measurement readings, mathematical functions, timers, profilecreation, set points or virtual objects.What if one day you want to change your configuration, add new modules or change their slots? That's not a problem!All you have to do is to send your device to an authorized distributor who will perform the changes you require.Power supply/consum.DisplayMeasurement inputsDigital inputsOutputsSensor supply outputCommunicationinterfaceIP rate protectionCMC-99• up to 9 universal, isolated: 0/4÷20 mA, 0/1÷5V, 0/2÷10V;thermocouples: J, K, S, T, N, R, B, E (PN-EN), L (GOST); -10 ÷ 25 mV,-10 ÷ 100 mV, 0 ÷ 600 mV, Pt100, Pt500, Pt1000 (PN-EN), Pt'50,Pt'100, Pt'500 (GOST), Ni100, Ni500, Ni1000 (PN-EN), Cu50,Cu100 (PN-83M-53852), Cu'50, Cu'100 (PN-83M-53852);resistance 0 ÷ 300 Ω, resistance 0 ÷ 3 kΩ• up to 48 analogue: 0/4 ÷ 20 mA, 0/1 ÷ 5V, 0/2 ÷ 10V• up to 24 thermocouples: J, K, S, T, N, R, B, E (PN-EN); L (GOST);± 25 mV, ± 100 mV, -10 ÷ 25 mV, -10 ÷ 100 mV• up to 12 RTD: Pt100, Pt500, Pt1000 (PN-EN); Pt'50, Pt'100,Pt'500 (GOST); Ni100, Ni500, Ni1000 (PN-EN); Cu50,Cu100 (PN-83M-53852); Cu'50, Cu'100 (PN-83M-53852);resistance 0 ÷ 300 Ω, resistance 0 ÷ 3 kΩ• up to 12 counters / flowmeter / ratemeter:0/4 ÷ 20 (1/sek.), 0/4 ÷ 20 (1/min.), 0/4 ÷ 20 (1/godz.)• up to 49 digital *CMC-14119 - 50V DC, 16 - 35V AC or 85 - 260V AC/DC, typ. 15 VA, max. 20 VA 19 - 50V DC, 16 - 35V AC or 85 - 260V AC/DC, typ. 25 VA, max. 35 VA3.5” graphic TFT, 16-bit colour, 320 x 240 pxs, touchscreen navigation 5.7” graphic TFT, 16-bit colour, 320 x 240 pxs, touchscreen navigation- up to 8 analogue, isolated: 4-20 mA- up to 16 relay 1A/250V- up to 4 relay 5A/250V- up to 16 SSR1 x 24V DC ±5%, 200 mA max.Basic version: RS-485, 1 x USB Host (front or back),ETU: 1 or 2 x USB Host, 1 x Ethernet 10 MBACM: 2 x RS-485, 1 x RS-485/232, 1 or 2 x USB Host, 1 x Eth. 10 MBProtocols: Modbus RTU Master or Slave, Modbus TCP Server, HTTPIP 65 or IP 40 (version with front USB), options: frame IP 65 for panelcut-out sealing and transparent door with key (IP 54)• up to 15 universal, isolated: 0/4÷20 mA, 0/1÷5V, 0/2÷10V;thermocouples: J, K, S, T, N, R, B, E (PN-EN), L (GOST); -10 ÷ 25 mV,-10 ÷ 100 mV, 0 ÷ 600 mV, Pt100, Pt500, Pt1000 (PN-EN), Pt'50,Pt'100, Pt'500 (GOST), Ni100, Ni500, Ni1000 (PN-EN), Cu50,Cu100 (PN-83M-53852), Cu'50, Cu'100 (PN-83M-53852);resistance 0 ÷ 300 Ω, resistance 0 ÷ 3 kΩ• up to 72 analogue: 0/4 ÷ 20 mA, 0/1 ÷ 5V, 0/2 ÷ 10V• up to 36 thermocouples: J, K, S, T, N, R, B, E (PN-EN); L (GOST);± 25 mV, ± 100 mV, -10 ÷ 25 mV, -10 ÷ 100 mV• up to 18 RTD: Pt100, Pt500, Pt1000 (PN-EN); Pt'50, Pt'100,Pt'500 (GOST); Ni100, Ni500, Ni1000 (PN-EN); Cu50,Cu100 (PN-83M-53852); Cu'50, Cu'100 (PN-83M-53852);resistance 0 ÷ 300 Ω, resistance 0 ÷ 3 kΩ• up to 12 counters / flowmeter / ratemeter:0/4 ÷ 20 (1/sek.), 0/4 ÷ 20 (1/min.), 0/4 ÷ 20 (1/godz.)• up to 73 digital *- up to 24 analogue, isolated: 4-20 mA- up to 36 relay 1A/250V- up to 18 relay 5A/250V- up to 72 SSR1 x 24V DC ±5%, 200 mA max.Basic version: RS-485, 1 x USB Host (front or back),ETU: 1 or 2 x USB Host, 1 x Ethernet 10 MBACM: 2 x RS-485, 1 x RS-485/232, 1 or 2 x USB Host, 1 x Eth. 10 MBProtocols: Modbus RTU Master or Slave, Modbus TCP Server, HTTPIP 65 or IP 40 (version with front USB), options: frame IP 65 for panelcut-out sealing and transparent door with key (IP 54)Data memoryData recording speedOperating temperatureStorage temperatureCase dimensions- panel cut-outInstallation depthPanel thicknessinternal 1.5 GBavailable from 0,1 s to 24 h with resolution 0,1 s0°C ... +50°C (optional -20°C ... +50°C)-10°C ... +70°C (optional -20°C ... +70°C)96 x 96 x 100 mm90,5 x 90,5 mm102 mm min.5 mm max. (optional 45 mm max. using SPH-45 holders)internal 1.5 GBavailable from 0,1 s to 24 h with resolution 0,1 s0°C ... +50°C (optional -20°C ... +50°C)-10°C ... +70°C (optional -20°C ... +70°C)144 x 144 x 100 mm137 x 137 mm102 mm min.5 mm max. (optional 45 mm max. using SPH-45 holders)* one digital input is available in standard, integrated with PS3/PS32 or PS4/PS42 power supply modules3

MultiCon CMC I/O modulesOrderingversion:99 : 96 x 96 mm case141 : 144 x 144 mm caseMultiCon CMC-XX-P/D/C/B/A-XX1options:00: no options01: IP 650B: front USB Host (IP 40)slot P - power supply moduleslot D - communication moduleslot A - I/O moduleslot B - I/O moduleslot C - I/O moduleavailable moduleslisted belowModuletypePS3XPS42EETUACMUSBEUN3UN5I16I24IS6U16U24UI4UI8UI12RT4RT6TC4TC8TC12D8D16D24CP2CP4HM2HM4FT2FT4FI2FI4R81R121R45R65S8S16S24IO2IO4IO6IO8Descriptionpower supply 19 ÷ 50V DC, 16 ÷ 35V ACpower supply 85 ÷ 260V AC/DCno communication module (available for 0B option only)communication module (1 x USB Host, 1 x Ethernet 10 MB)advanced communication module, includes: 1 x RS-485,1 x RS-485/232, 1 x USB Host, 1 x Ethernet 10 MB)USB port (back)empty slot3 universal inputs U/I/RTD/TC/mV, isolated5 universal inputs U/I/RTD/TC/mV, isolated16 x current inputs24 x current inputs6 x current (4-20 mA) inputs, isolated16 x voltage inputs24 x voltage inputs4 x voltage inputs + 4 x current inputs8 x voltage inputs + 8 x current inputs12 x voltage inputs + 12 x current inputs4 x RTD inputs6 x RTD inputs4 x TC inputs8 x TC inputs12 x TC inputs8 x digital inputs, isolated16 x digital inputs, isolated24 x digital inputs, isolated2 x pulse inputs, universal counters, isolated4 x pulse inputs, universal counters, isolated2 x hourmeters, isolated4 x hourmeters, isolated2 x pulse inputs (flowmeter/ratemeter), isolated + 2 x current inputs4 x pulse inputs (flowmeter/ratemeter), isolated + 4 x current inputs2 x current inputs (flowmeter/ratemeter) + 2 x current inputs4 x current inputs (flowmeter/ratemeter) + 4 x current inputs8 x SPST relay 1A outputs12 x SPST relay 1A outputs4 x SPDT relay 5A outputs6 x SPDT relay 5A outputs8 x SSR driver outputs16 x SSR driver outputs24 x SSR driver outputs2 x 4-20 mA outputs, isolated4 x 4-20 mA outputs, isolated6 x 4-20 mA outputs, isolated8 x 4-20 mA outputs, isolatedMultiCon CMC-99MultiCon CMC-141slot P slot D slot C slot B slot A slot P slot D slot C slot B slot AABBB BBBBB4AThe installation of the R81 module in slot B only in the case where in the slot C another relay module (R81 or R45) was installed.B Available for PS32 and PS42 power supplies onlywww.multicon24.eu

MultiCon CMC I/O modulesPower supply modulesPS42PS3, PS31: 19V ÷ 50V DC; 16V ÷ 35V ACPS42: 85V ÷ 260V DC or ACPS3, PS31 and PS42 modules are used to supply the MultiCon.PS3 and PS31 modules can be supplied with:19V ÷ 50V DC16V ÷ 35V ACPS42 module can be supplied with:85V ÷ 260V DC or ACPS3Additionally modules contain:- service purpose input (service port),- 24V DC output, used to supply external sensors (not availablein PS31),- digital input, used for digital signal measurement,- RS-485 port, used for communication with other devicesusing Modbus protocol.MODULE PIN ASSIGNMENTPS3PS4212345678Power supply19V÷50V DC16V÷35V ACGNDGNDB-A+SERVICE+24V DC ±5%Imax. = 200mAdigital input0/15..24V DCRS-485isolated12345678Power supply85V÷260V AC/DCGNDGNDB-A+SERVICE+24V DC ±5%Imax. = 200mAdigital input0/15..24V DCRS-485PEisolatedPin description:1, 2 : power supply connectors - supply voltage dependson version, but polarization is irrelevant,3 : ground for voltage output,4 : +24V DC output, used to power external sensors,5 : digital input - used to measure digital signals,6 : ground for connectors 5, 7, 8,7, 8 : data inputs for RS-485TECHNICAL DATAPS3 PS31 PS42Number of inputs/outputs 5 5 5Power supply 19V...24...50V DC; 16V...24...35V AC 19V...24...50V DC; 16V...24...35V AC 85V...230...260 AC/DC; 50-60 HzUSB SERVICE Service port Service port Service portSensor supply output 24V DC ±5% / max. 200 mA no output 24V DC ±5% / max. 200 mADigital input0...15...24V DC with galvanic isolation(low state: 0 ÷ 1V, high state: 8 ÷ 24V)power consumption: 7,5 mA / 24Visolation strenght: 1 min @ 500V DC0...15...24V DC with galvanic isolation(low state: 0 ÷ 1V, high state: 8 ÷ 24V)power consumption: 7,5 mA / 24Visolation strenght: 1 min @ 500V DC0...15...24V DC with galvanic isolation(low state: 0 ÷ 1V, high state: 8 ÷ 24V)power consumption: 7,5 mA / 24Visolation strenght: 1 min @ 500V DCInterfaceRS-485, Modbus RTU,1200 ÷ 115200 bit/sec.RS-485, Modbus RTU,1200 ÷ 115200 bit/sec.RS-485, Modbus RTU,1200 ÷ 115200 bit/sec.Weight 65g 65g 65gPart number M99-PS3-001 M99-PS31-001 M99-PS42-001www.multicon24.eu5

MultiCon CMC I/O modulesInput modules - universalUN3: 3 isolated universal inputsUN5: 5 isolated universal inputsOn customer's request, it is possible to install modules equipped with 3 or 5universal inputs. Each module includes a sensor for cold junctioncompensation. It is most advanced input module, available for the CMC.With its help user can make many different kind of measurements in eachchannel. This module can measure: voltage, current, resistance,temperature using resistance sensors or thermocouples.MODULE PIN ASSIGNMENTUN3UN5UN modules parameters are:- Name - read-only input name given by the device,- Unit - read-only field which displays „°C”, „mA”, „V”, „Ohm” or „mV”, dependingon Mode parameter settings,- Mode - allows to set operation mode, eg. select a type of thermocouple or mVmeasurement range or other,- Low limit - defines measurement level below which in logical channel „Lo” statewill be displayed,- High limit - defines measurement level above which in logical channel „Hi” statewill be displayed,- Wire compensation - menu which allows to compensate measurement errors,which can be caused by wrong sensor readings, options: compensation mode(allows to choose parameter which will be used in compensation process),disable (compensation is not active), manual (allows to compensate sensorconstant offset),- Compensation - parameter which allows to manually compensate sensor error,written here value will be added or subtracted from measured sensor value,- Actual temperature - parameter in which user enters actual temperature nearthe sensor, which is measured by more reliable thermometer,- Compensate - button which activates the compensation; value which is writtenin Actual temperature parameter will be from now on used for compensation,- Compensation - read only parameter; displays voltage value calculated tocompensate temperature measurement.UN33 universal inputs+n01V, mA-n02TC, mVn03 +RTDn04n05+n06-n07TC, mVn08 +RTDn09n10n11n12n13n14n15+-TC, mV+RTDIN1IN2IN3 IN_TPin description:IN_T : Cold JunctiontemperaturesensorUN55 universal inputs+n01V, mA-n02TC, mVn03 +RTDn04n05+n06-n07TC, mVn08 +RTDn09n10n11n12n13n14n15n16n17n18n19n20n21n22n23n24n25+-TC, mV+RTD+-TC, mV+RTD+-TC, mV+RTDIN1IN2IN4 IN3 IN_TIN5TECHNICAL DATANumber of inputs 3 (isolated) 5 (isolated)UN3UN5Measurement rangescurrent inputs:voltage inputs:thermocouple inputs:RTD inputs: (2, 3, 4 wire)resistance input:0 ÷ 20 mA, 4 ÷ 20 mA0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V, -10 ÷ 25mV, -10 ÷ 100mV, 0 ÷ 600mVJ, K, S, T, N, R, B, E (PN-EN), L (GOST)Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100,Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50,Cu'100 (PN-83M-53852)0-300 Ω, 0-3 kΩ0 ÷ 20 mA, 4 ÷ 20 mA0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V, -10 ÷ 25mV, -10 ÷ 100mV, 0 ÷ 600mVJ, K, S, T, N, R, B, E (PN-EN), L (GOST)Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100,Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50,Cu'100 (PN-83M-53852)0-300 Ω, 0-3 kΩSampling period535 ms (current, voltage, thermocouple inputs)1410 ms (RTD, resistance inputs)535 ms (current, voltage, thermocouple inputs)1410 ms (RTD, resistance inputs)Weight 44 g 73 gPart number M99-UN3-001 M141-UN5-0016 www.multicon24.eu

MultiCon CMC I/O modulesInput modules - currentI16: 16 current inputsI24: 24 current inputsIS6: 6 isolated current inputsMultiCon can be equipped with modules having 16 or 24 non isolated or 6isolated current inputs. To make sensor connection easier, modules I16 andI24 have inputs groupped into fours. IS6 module has all inputs separated onefrom another and signal polarity on it's inputs has no matter.I16TECHNICAL DATAIS6All GND terminals in the I16 and I24 modules are commonbut separated from power supply and other modules.Current inputs parameters are:- Name - read-only input name given by the device,- Unit - read-only field which displays measurementunit „mA”,- Mode - defines measurement range (0-20 or 4-20),- Low limit - defines measurement low limit, belowwhich the device returns „Lo” value,- High limit - defines measurement high limit, abovewhich the device returns „Hi” value.12 Power supply(depending on version)3 GND+24V DC ±5% (Imax. = 200mA)456 GND7 B-8 A+SERVICEdigital input0/15..24V DCRS-485insulatedIS66 isolated current inputsn01IN 1n02n03IN 2n04n05IN 3I in1 I in2n06Sensor 1 Sensor 2n07n08n09n10n11n12IN 4IN 5IN 6Examplary connection for 2 - wiresensors and IS6 moduleI1616 current inputsn01 IN1n02 IN2n03 IN3n04 IN4n05 GNDn06n07n08n09n10 GNDn11n12n13n14n15 GNDMODULE PIN ASSIGNMENTn16n17n18n19n20 GNDIN5IN6IN7IN8IN9IN10IN11IN12IN13IN14IN15IN164 x 0-20mA4 x 0-20mA4 x 0-20mA4 x 0-20mAI2424 current inputsn01 IN1n02 IN2n03 IN3n04 IN4n05 GNDn06n07n08n09n10 GNDn11n12n13n14n15 GNDn16n17n18n19n20 GNDn21n22n23n24n25 GNDn26n27n28n29n30 GNDIN5IN6IN7IN8IN9IN10IN11IN12IN13IN14IN15IN16IN17IN18IN19IN20IN21IN22IN23IN244 x 0-20mA4 x 0-20mA4 x 0-20mA4 x 0-20mA4 x 0-20mA4 x 0-20mAIS66 isolated current inputsn01n02n03n04n05n06n07n08n09n10n11n12IN 1IN 2IN 3IN 4IN 5IN 6I16 I24 IS6Number of inputs 16 24 6 (isolated)Measurement rangeHardware limitation0 ÷ 20 mA, 4 ÷ 20 mA-2 mA ÷ 30 mA0 ÷ 20 mA, 4 ÷ 20 mA-2 mA ÷ 30 mA0 ÷ 20 mA, 4 ÷ 20 mA3 mA ÷ 30 mAResolution 1 µA 1 µA 1 µAPrecision 0.25% @ 25°C 0.25% @ 25°C 0.25% @ 25°CInternal impedance type 100 Ω type 100 Ω ~7V voltage drop; type 1750 Ω @ 4 mA; type 400 Ω @ 20 mAProtection 50 mA, auto-reset fuse 50 mA, auto-reset fuse 50 mA, auto-reset fuseSampling period 10 ms * 10 ms * 100 msTemperature stability - - 65 ppm/°CWeight 42 g 52 g 39 gPart number M99-I16-001 M141-I24-001 M99-IS6-001* CMC reads data from modules every 100 mswww.multicon24.eu7

MultiCon CMC I/O modulesInput modules - voltageU16: 16 voltage inputsU24: 24 voltage inputsOn customer's request, the MultiCon device can be equipped with 16 or 24voltage input modules.To make sensor connection easier, inputs are grouped and all groundterminals are common but separated from power supply and other modules.MODULE PIN ASSIGNMENTVoltage input parameters are:- Name - read-only input name given by the device,- Unit - read-only field which displays measurement unit „V”,- Mode - defines measurement range (0 - 5V, 1 - 5V, 0 - 10V, 2 - 10V),- Low limit - defines measurement level below which in logical channel„Lo” state will be displayed,- High limit - defines measurement level above which in logical channel„Hi” state will be displayed.12 Power supply(depending on version)34GND56 GND7 B-8 A+U16Connections for 3 - wire sensor (voltage)SERVICE+24V DC ±5% (Imax. = 200mA)digital input0/15..24V DCRS-485insulatedI in1I in2Sensor 1 Sensor 2+ - + -U1616 voltage inputsIN1n01IN2n02n03 IN3n04 IN4n05 GNDn06n07n08n09n10 GNDn11n12n13n14n15 GNDn16n17n18n19n20 GNDIN5IN6IN7IN8IN9IN10IN11IN12IN13IN14IN15IN164 x 0-10V4 x 0-10V4 x 0-10V4 x 0-10VU1616 voltage inputsIN1n01IN2n02n03 IN3n04 IN4n05 GNDn06n07n08n09n10 GNDn11n12n13n14n15 GNDn16n17n18n19n20 GNDIN5IN6IN7IN8IN9IN10IN11IN12IN13IN14IN15IN164 x 0-10V4 x 0-10V4 x 0-10V4 x 0-10VU2424 voltage inputsIN1n01IN2n02n03 IN3n04 IN4n05 GNDn06n07n08n09n10 GNDn11n12n13n14n15 GNDn16n17n18n19n20 GNDn21n22n23n24n25 GNDn26n27n28n29n30 GNDIN5IN6IN7IN8IN9IN10IN11IN12IN13IN14IN15IN16IN17IN18IN19IN20IN21IN22IN23IN244 x 0-10V4 x 0-10V4 x 0-10V4 x 0-10V4 x 0-10V4 x 0-10VTECHNICAL DATANumber of inputs 16 24U16U24Measurement rangeHardware limitation0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V-2V ÷ 13V0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V-2V ÷ 13VHardware resolution 1 mV 1 mVPrecision 0.25% @ 25°C 0.25% @ 25°CInternal impedance 50 kΩ 50 kΩSampling period 10 ms (CMC reads modules every 100 ms) 10 ms (CMC reads modules every 100 ms)Weight 42 g 61 gPart number M99-U16-001 M141-U24-0018 www.multicon24.eu

MultiCon CMC I/O modulesUI4Input modules - voltage/currentUI4: 4 voltage + 4 current inputsUI8: 8 voltage + 8 current inputsUI12: 12 voltage + 12 current inputsThe MultiCon UI modules include 8, 16 or 24 voltage / current inputs, mixedwhere half of them are voltage and half are current.To make sensor connection easier, inputs are grouped and all groundterminals are common but separated from power supply and other modules.UI8MODULE PIN ASSIGNMENTVoltage / current inputs parameters are:- Name - read-only input name given by the device,- Unit - read-only field which displays unit of measurement,- Mode - defines measurement range,- Low limit - defines measurement level below which in logicalchannel „Lo” state will be displayed,- High limit - defines measurement level above which in logicalchannel „Hi” state will be displayed.12 Power supply(depending on version)34GND56 GND7 B-8 A+Connections for 3 - wire sensor (current)SERVICE+24V DC ±5% (Imax. = 200mA)digital input0/15..24V DCRS-485insulatedI in1Sensor 1 Sensor 2TECHNICAL DATAI in2+ - + -UI44 current + 4 voltage inputsn01n02n03n04n05 GNDn06n07n08n09n10 GNDIN1IN2IN3IN4IN5IN6IN7IN84 x 0-20mA4 x 0-10V12 Power supply(depending on version)GND 3+24V DC ±5% (Imax. = 200mA)456 GND7 B-8 A+UI44 voltage+ 4 current inputsn01n02n03n04n05 GNDn06n07n08n09n10 GNDConnections for 3 - wire sensor (voltage)SERVICEdigital input0/15..24V DCRS-485insulatedU in1U in2Sensor 1 Sensor 2+ ++ - + -IN1IN2IN3IN4IN5IN6IN7IN8UI44 current + 4 voltage inputsn01n02n03n04n05 GNDn06n07n08n09n10 GNDIN1IN2IN3IN4IN5IN6IN7IN84 x 0-20mA4 x 0-10V4 x 0-20mA4 x 0-10VUI88 voltage+ 8 current inputsn01n02n03n04n05 GNDn06n07n08n09n10 GNDn11n12n13n14n15 GNDn16n17n18n19n20 GNDIN1IN2IN3IN4IN5IN6IN7IN8IN9IN10IN11IN12IN13IN14IN15IN164 x 0-20mA4 x 0-20mA4 x 0-10V4 x 0-10VUI1212 voltage+ 12 current inputsn01n02n03n04n05 GNDn06n07n08n09n10 GNDn11n12n13n14n15 GNDn16n17n18n19n20 GNDn21n22n23n24n25 GNDn26n27n28n29n30 GNDIN1IN2IN3IN4IN5IN6IN7IN8IN9IN10IN11IN12IN13IN14IN15IN16IN17IN18IN19IN20IN21IN22IN23IN244 x 0-20mA4 x 0-20mA4 x 0-20mA4 x 0-10V4 x 0-10V4 x 0-10VUI4 UI8 UI12Number of inputs 4 x voltage + 4 x current 8 x voltage + 8 x current 12 x voltage + 12 x currentMeasurement rangeHardware limitationvoltage: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V;current: 0 ÷ 20 mA, 4 ÷ 20 mAvoltage: -2V ÷ 12V; current: -2 mA ÷ 30 mAvoltage: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V;current: 0 ÷ 20 mA, 4 ÷ 20 mAvoltage: -2V ÷ 12V; current: -2 mA ÷ 30 mAvoltage: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V;current: 0 ÷ 20 mA, 4 ÷ 20 mAvoltage: 0V ÷ 12V; current: 0 mA ÷ 24 mAHardware resolution voltage: 1 mV; current: 1 µA voltage: 1 mV; current: 1 µA voltage: 1 mV; current: 1 µAPrecision 0.25% @ 25°C 0.25% @ 25°C 0.25% @ 25°CInternal impedance voltage: 50 kΩ; current: type 100 Ω voltage: 50 kΩ; current: type 100 Ω voltage: 50 kΩ; current: type 100 ΩProtectionvoltage: no;current: 50 mA, auto-reset fusevoltage: no;current: 50 mA, auto-reset fusevoltage: no;current: 50 mA, auto-reset fuseSampling period 10 ms, CMC reads modules every 100 ms 10 ms, CMC reads modules every 100 ms 10 ms, CMC reads modules every 100 msWeight 32 g 42 g 61 gPart number M99-UI4-001 M99-UI8-001 M141-UI12-001*www.multicon24.eu9

MultiCon CMC I/O modulesInput modules - thermocoupleTC4: 4 thermocouple inputsTC8: 8 thermocouple inputsTC12: 12 thermocouple inputsThe range of TC modules consist of 4, 8 and 12 thermocouple input modules,each equipped with 1 input for connectors temperature measurement.Primary destination of these modules is temperature measurement usingthermocouple sensors, but it is also possible to measure voltage with typicalthermocouple ranges.TC4TECHNICAL DATATC8TC modules parameters are:- Name - read-only input name given by the device,- Unit - read-only field which displays „°C” or „mV”, depending onMode parameter settings,- Mode - allows to set type of thermocouple or mV measurementrange,- Low limit - defines measurement level below which in logical channel„Lo” state will be displayed,- High limit - defines measurement level above which in logical channel„Hi” state will be displayed,- Wire compensation - allows to compensate measurement errors,which can be caused by wrong sensor readings,- Compensation - parameter which allows to manually compensatesensor error, written here value is added or subtracted from measuredsensor value,- Actual temperature - parameter in which user enters actualtemperature near the sensor, which is measured by a more reliablethermometer,- Compensate - button which activates the compensation,- Compensation - read only parameter; displays voltage valuecalculated to compensate temperature measurement.MODULE PIN ASSIGNMENTTC44 thermocoupleinputsn01 -IN1n02 +-n03IN2n04+n05 -IN3n06 +-n07IN4n08+IN_TTC88 thermocoupleinputsn01 -IN1n02 +-n03IN2n04+n05 -IN3n06 +-n07IN4n08+n09 -n10 +-n11n12+n13 -n14 +-n15n16+Pin description:IN_T : Cold Junctiontemperature sensorIN_TIN5IN6IN7IN8TC1212 thermocoupleinputsn01 -IN1n02 +-n03IN2n04+n05 -IN3n06 +-n07IN4n08+-n09 IN5+n10-n11 IN6n12+n13 -n14 +-n15n16+n17 -n18 +-n19n20+n21 -n22 +-n23n24+IN_TIN7IN8IN9IN10IN11IN12TC4 TC8 TC12Number of inputs 4 8 12Measurement rangeHardware limitationthermocouple J, K, S, T, N, R, B, E (PN-EN),L (GOST); voltage: -10 ÷ 25 mV, ±25 mV,-10 ÷ 100 mV, ±100 mV-30 mV ÷ 30 mV, -120 mV ÷ 120 mVthermocouple J, K, S, T, N, R, B, E (PN-EN),L (GOST); voltage: -10 ÷ 25 mV, ±25 mV,-10 ÷ 100 mV, ±100 mV-30 mV ÷ 30 mV, -120 mV ÷ 120 mVthermocouple J, K, S, T, N, R, B, E (PN-EN),L (GOST); voltage: -10 ÷ 25 mV, ±25 mV,-10 ÷ 100 mV, ±100 mV-30 mV ÷ 30 mV, -120 mV ÷ 120 mVHardware resolution 1 µV (± 30 mV), 4 µV (± 120 mV) 1 µV (± 30 mV), 4 µV (± 120 mV) 1 µV (± 30 mV), 4 µV (± 120 mV)Permissible long time overload 20% 20% 20%Permissible voltage difference 0.5 V between channels 0.5 V between channels 0.5 V between channelsInput impedance typ. 1 MΩ typ. 1 MΩ typ. 1 MΩSampling period 385 ms * 385 ms * 385 ms *Weight 32 g 42 g 52 gPart number M99-TC4-001 M99-TC8-001 M141-TC12-001* CMC reads data from modules every 100 ms10 www.multicon24.eu

MultiCon CMC I/O modulesInput modules - RTDRT4: 4 RTD inputsRT6: 6 RTD inputsThe range of RTD modules consist of 4 and 6 RTD input modules. These inputsare used for temperature measurement using RTD type temperature sensors(by 2-, 3- and 4-wire method), or for resistance measurement in the rangesup to 3kΩ. The RT modules cooperate with many kinds of resistancethermometers and thanks to this, there is no need to change the modulewhen another temperature sensor has been used, the user only needs tochange the settings in the MultiCon unit.RT4 and RT6 modules parameters are:- Name - read-only input name given by the device,- Unit - read-only field which displays „°C” when Mode parameter is set ontemperature measurement, or displays „Ω” when Mode parameter is set onresistance measurement,- Mode - defines which sensor is used for measurement, or what is the resistancemeasurement range and what is the method of these measurements,- Low limit - defines measurement level below which in logical channel „Lo” state willbe displayed,- High limit - defines measurement level above which in logical channel „Hi” statewill be displayed.HeaterRT4Control system0÷5AGNDSlave deviceSlave address: 1Register: 1hCurrentconverterTECHNICAL DATAPt100sensorRS-485123Power supply(depending on version)GND4 +24V DC ±5% (Imax. = 200mA)5678GNDB-A+SERVICEdigital input0/15..24V DCRS-485insulatedRT6Schematic diagram for the RT4 module and MB1 Modbus portSlot BRT44 RTD inputsn01n02n03n04n05n06n07n08n09n10n11n12n13n14n15n16IN1IN2IN3IN4Inp.B1 : RTDInp.B2 : RTDInp.B3 : RTDInp.B4 : RTDRTD 2-wireconfigurationn01n02n03n04IN1MODULE PIN ASSIGNMENTRTD 3-wireconfigurationn01n02n03n04RT44 RTD inputsn01n02n03n04n05n06n07n08n09n10n11n12n13n14n15n16IN1n01n02n03n04IN1IN2IN3IN4RTD 4-wireconfigurationIN1RT66 RTD inputsn01n02n03n04n05n06n07n08n09n10n11n12n13n14n15n16n17n18n19n20n21n22n24n25IN1IN2IN3IN4IN5IN6RT4RT6Number of inputs 4 6Measurement rangeTemperature rangePt100, Pt500, Pt1000 (PN-EN); Pt'50, Pt'100, Pt'500 (GOST)Ni100, Ni500, Ni1000 (PN-EN)Cu50, Cu100, Cu'50, Cu'100 (PN-83M-53852)resistance: 0 ÷ 300 Ω, 0-3 kΩ-100 ÷ 600°C (Pt100, Pt500, Pt1000)-200 ÷ 600°C (Pt'50, Pt'100, Pt'500)-50 ÷ 200°C (Cu50, Cu100); -200 ÷ 200°C (Cu'50, Cu'100)-60 ÷ 180°C (Pt100, Pt500, Pt1000)Pt100, Pt500, Pt1000 (PN-EN); Pt'50, Pt'100, Pt'500 (GOST)Ni100, Ni500, Ni1000 (PN-EN)Cu50, Cu100, Cu'50, Cu'100 (PN-83M-53852)resistance: 0 ÷ 300 Ω, 0-3 kΩ-100 ÷ 600°C (Pt100, Pt500, Pt1000)-200 ÷ 600°C (Pt'50, Pt'100, Pt'500)-50 ÷ 200°C (Cu50, Cu100); -200 ÷ 200°C (Cu'50, Cu'100)-60 ÷ 180°C (Pt100, Pt500, Pt1000)Connection method 2, 3 and 4 wire (switched manually) 2, 3 and 4 wire (switched manually)Sampling period 1 s 1 sWeight 42 g 57 gPart number M99-RT4-001 M141-RT6-001www.multicon24.eu11

MultiCon CMC I/O modulesD8Input modules - digitalD8: 8 isolated digital inputsD16: 16 isolated digital inputsD24: 24 isolated digital inputsOn customer's request, the MultiCon device can be equipped with moduleshaving 8, 16 or 24 digital inputs. These inputs can be used singly, in groups offour or all inputs available in the module. The measurement results arepresented in decimal system.D16MODULE PIN ASSIGNMENTD modules parameters are:- Name - read-only input name given by thedevice,- Filter time - defines minimal time that hasto elapse from last input state change, ifthis change wants to be noticed.IN 1IN 2IN 3IN 4COM 1-4IN 5IN 6IN 7IN 8COM 5-8R=3kR=3kR=3kR=3kIsolationTECHNICAL DATAInterfaceCMC-99/141Main boardD88 digital inputsn01 IN1n02 IN2n03 IN3n04 IN4n05 COM 1-4n06 IN5n07 IN6n08 IN7n09 IN8n10 COM 5-8Internal structureof the digital inputmodule optoisolationIN9IN10IN11D1616 digital inputsn01n02n03n04n05n06n07n08n09n10n11n12IN1IN2IN3IN4COM 1-4IN5IN6IN7IN8COM 5-8IN9IN10IN17IN18n13n14n15n16n17n18n19IN11IN12COM 9-12IN13IN14IN15IN16IN19IN20n20 COM 13-16All COMs are isolatedfrom each other andfrom the device GNDIN21D2424 digital inputsn01 IN1n02 IN2n03 IN3IN25n04n05n06n07n08n09n10n11n12IN4COM 1-4IN5IN6IN7IN8COM 5-8IN9IN10IN26n13n14n15n16n17n18n19IN11IN12COM 9-12IN13IN14IN15IN16IN27IN28n20 COM 13-16n21 IN17n22 IN18n23 IN19IN29n24 IN20n25 COM 17-20n26n27n28n29n30IN21IN22IN23IN24COM 21-24IN30IN31D8 D16 D24Number of inputs8 (2 groups of 4 inputs each, isolatedfrom others signals)16 (4 groups of 4 inputs each, isolatedfrom others signals)24 (6 groups of 4 inputs each, isolatedfrom other signals)Input signals voltage levels| Uin | < 1V (logical LOW state)| Uin | > 4V (logical HIGH state)| Uin | < 1V (logical LOW state)| Uin | > 4V (logical HIGH state)| Uin | < 1V (logical LOW state)| Uin | > 4V (logical HIGH state)Max input voltage 30V 30V 30VInput current consumptionabout 15mA @24V; about 5mA @10Vabout 2mA @5Vabout 15mA @24V; about 5mA @10Vabout 2mA @5Vabout 15mA @24V; about 5mA @10Vabout 2mA @5VInsulation strength 500V 500V 500VSampling frequency 3 kHz * 3 kHz * 3 kHz *Input signals representation8 single bits: IN1-IN8; two 4-bit groups:IN9-IN10; 1 byte: IN1116 single bits: IN1-IN16; four 4-bitgroups: IN17-IN20; 1 integer: IN2124 single bits: IN1-IN24; six 4-bitgroups: IN25-IN30; 1 integer: IN31Weight 30 g 40 g 58 gPart number M99-D8-001 M99-D16-001 M141-D24-001* CMC reads state of inputs every 100 ms12 www.multicon24.eu

MultiCon CMC I/O modulesInput modules - universal countersCP2: 2 isolated universal countersCP4: 4 isolated universal countersThe MultiCon CMC can be also equipped with modules having 2 or 4universal counters. Each counter can be configured independently and hastwo counting inputs (Inp[n]1, Inp[n]2), programmable input (Prog[n]), resetinput (Res[n]), where „n” means counter number from 1 to 4.CP2MODULE PIN ASSIGNMENTCP22 universal countersCP44 universal countersCP4The counter parameters are:- Name - read-only input name given by the device,-Unit - read-only field which displays measurement unit: pulses,- Low Limit - value determining amount of pulses, below which inlogical channel „Lo” state will be displayed,- High Limit - value determining amount of pulses, above which inlogical channel „Hi” state will be displayed,- Function mode - specifies the counting mode: „A + B”, „A - B”, „quad”,- Reset now - button allowing user to manually reset the counter,- Reset mode - it allows to choose an additional resets for the counter,it has the following parameters: from log. channel or external,- Reset source - this parameter is visible when Reset mode is set asfrom log. channel or both, it contains a list of logical channels and thechosen one will reset the counter when its value is higher than 0,- Prog. inp. mode - specifies counter reaction on higher than 0 valueappearance on Prog. input,- Filter - sets filter on counter inputs which allows getting rid ofnegative effects of signal bounces; it has the following parameters:disable, 10 ÷ 90.TECHNICAL DATAn01n02n03n04n05n06n07n08n09n10Inp11Inp12Prg1Res1COM1Inp21Inp22Prg2Res2COM2Counter 1Counter 2n01n02n03n04n05n06n07n08n09n10n11n12n13n14n15n16n17n18n19n20Pin description:Inp[n]1, Inp[n]2 : counting inputs, pulsePrg[n] : programmable inputsRes[n] : reset inputsCOM[n] : common inputs[n] = counter numberInp11Inp12Prg1Res1COM1Inp21Inp22Prg2Res2COM2Inp31Inp32Prg3Res3COM3Inp41Inp42Prg4Res4COM4Counter 1Counter 2Counter 3Counter 4CP2CP4Number of inputsCMC counting rangeModule hardware limitationInput signals voltage levels2 counters (2 groups x 4 inputs, every group isolatedfrom the other signals)15 15-4.5 ÷ 4 pulses31 31-2 ÷ 2 pulses| Uin | < 1V (logical LOW state)| Uin | > 4V (logical HIGH state)4 counters (4 groups x 4 inputs, every group isolatedfrom the other signals)15 15-4.5 ÷ 4 pulses31 31-2 ÷ 2 pulses| Uin | < 1V (logical LOW state)| Uin | > 4V (logical HIGH state)Max input voltage 30V 30VInput current consumption about 14mA @24V; about 6mA @10V about 14mA @24V; about 6mA @10VInsulation strength 2 kV 2 kVMax input frequency 5 kHz * 5 kHz *Protection 50 mA auto-reset fuse 50 mA auto-reset fuseWeight 35 g 42 gPart number M99-CP2-001 M99-CP4-001* CMC reads result every 100 mswww.multicon24.eu13

MultiCon CMC I/O modulesInput modules - hourmetersHM2: 2 isolated hourmetersHM4: 4 isolated hourmetersHM2The HM2 and HM4 are the hourmeters modules developed for the MultiConCMC units. Allow to measure period of time between START and STOPsignals, as well as sum of periods. These modules are ideal solution to controlworking time of a machinery, duration of phenomena or for maintenancepurposes. They have 2 or 4 independent couters. Each counter is equippedwith 2 inputs - START/STOP and PRG (programmable), which can be set asasynchronous RESET, HOLD or used as independent digital input.MODULE PIN ASSIGNMENTHM4HM22 hourmetersHM44 hourmetersHM counters parameters are:- Name - read-only input name given by the device,-Unit - read-only parameter which displays measurement unit: sec.,- Mode - read-only parameter, displays measured physical quantity: Time,- Low Limit - value determining time, below which in logical channel „Lo” statewill be displayed,- High Limit - value determining time, above which in logical channel „Hi” statewill be displayed,- Start/Stop inp. trig. - allows to define, when the device should start or stopcounting, options: high level, low level, rising edge, falling edge,- Reset now - button allowing user to manually reset the counter,- Reset mode - parameter allowing choose an additional resets for the counter,it has the following options: disable, from log. channel external or both,- Reset source - this parameter is visible when Reset mode is set as from log.channel or both, it contains a list of logical channels and the chosen one willreset the counter when its value is higher than 0,- Prog. inp. mode - specifies counter reaction on active signal appearance onProg. input, options: binary input, reset, inhibit,- Prog. inp. trig. - allows to define when the device should reset or inhibit timecounter, options: high level, low level, rising edge, falling edge,- Filter - sets filter on counter inputs which allows to getting rid of negativeeffects of signal bounces; it has the following parameters: disable, 10 ÷ 90.n01n02n03 COM 1n04n05START/STOP 1PRG 1n06 COM 2START/STOP 2PRG 2n01n02n03 COM 1n04n05Pin description:START/STOP [n] - input which starts and stopstime counting,PRG [n] : programmable inputCOM [n] : common terminal[n] = counter numberSTART/STOP 1PRG 1n06 COM 2n07n08START/STOP 2PRG 2n09 COM 3n10n11START/STOP 3PRG 3n12 COM 4START/STOP 4PRG 4TECHNICAL DATAHM2HM4Number of inputs 2 hourmeters 4 hourmetersCMC counting rangeInput signals voltage levels90 - 10 sec.| Uin | < 1V (logical LOW state)| Uin | > 10V (logical HIGH state)90 - 10 sec.| Uin | < 1V (logical LOW state)| Uin | > 10V (logical HIGH state)Max input voltage 30V 30VInput current consumption about 14 mA @24V; about 6 mA @10V about 14 mA @24V; about 6 mA @10VInsulation strength 2 kV 2 kVMeasurement accurency ±30 ppm @ +25°C / ±50 ppm/K ±30 ppm @ +25°C / ±50 ppm/KMax input frequency 1 kHz 1 kHzProtection 50 mA auto-reset fuse 50 mA auto-reset fuseWeight 28 g 32,3 gPart number M99-HM2-001 M99-HM4-00114www.multicon24.eu

MultiCon CMC I/O modulesInput modules - analogue flowmetersFI2: 2 analogue flowmeters + 2 current inputsFI4: 4 analogue flowmeters + 4 current inputsThe FI modules have been especially designed for the MultiCon units used inflow measurement applications. They allow user to display and record bothactual flow (rate) and total flow (volume).These modules have extra 2 or 4 analogue inputs for general purpose use.Each flow channel is equipped with IN[n] input and common ground GND. Allinputs are galvanically separated from the device, however have commonground. The user can, thanks to Scaling parameter in Logical channel,interpret measured current by the device at its discretion, which allows tocooperate with any kind of analogue output sensors. The general purposeuse current inputs have common ground and they are isolated from thesupply voltage and other modules.FI2Analogue flowmeter parameters are:- Name - read-only input name given by the device,- Unit - read-only field which displays measurement unit,- Base unit - defines unit which is used by the totalizer (for example when flowmeasurement unit is m3/s, the base unit is „m3”) ,- Mode - defines current range of selected input (0÷20 mA, 4÷20 mA) and thetime base which is used during the measurement,- Low limit - value which determines measured current, below which in logicalchannel „Lo” state will be displayed,- High limit - value which determines measured current, above which in logicalchannel „Hi” state will be displayed,- Balance - submenu which contains totalizer settings:ź Reset now - manual reset of the totalizer,ź Reset mode - turns on and off reset from logical channel,ź Reset source - allows to choose a logical channel from the list, which willreset the totalizer, when value in this channel will be greater than 0,ź Strobe mode - turns on and off balance calculating from logical channel,ź Strobe source - allows to choose logical channel from the list, which willhold balance calculating in totalizer,ź Counting direction - turns on and off change of the counting direction,ź Direction source - allows to choose a logical channel from the list, whichwill change the counting direction.MODULE PIN ASSIGNMENTFI22 flowmeter inputs+ 2 current inputsn01n02n03n04n05GNDIN1IN2IN3IN42 x 0-20mA(flowmeter)2 x 0-20mAFI44 flowmeter inputs+ 4 current inputsn01n02n03n04n05n06n07n08n09n10GNDGNDIN1IN2IN3IN4IN5IN6IN7IN84 x 0-20mA(flowmeter)4 x 0-20mATECHNICAL DATAFI2FI4Number of inputs 2 x analogue flowmeter + 2 x current 4 x analogue flowmeter + 4 x currentMeasurement rangeHardware limitationflow input modes: 0 ÷ 20 mA, 4 ÷ 20 mAflow input units: 1/sec, 1/min, 1/hcurrent input: 0 ÷ 20 mA, 4 ÷ 20 mAcurrent: -2 mA ÷ 30 mAflow input modes: 0 ÷ 20 mA, 4 ÷ 20 mAflow input units: 1/sec, 1/min, 1/hcurrent input: 0 ÷ 20 mA, 4 ÷ 20 mAcurrent: -2 mA ÷ 30 mAHardware resolution current: 1 µA current: 1 µAPrecision 0.25% @ 25°C 0.25% @ 25°CInternal impedance current: typ. 100 Ω current: typ. 100 ΩProtection current: 50 mA, auto-reset fuse current: 50 mA, auto-reset fuseSampling period 10 ms (CMC reads modules every 100 ms) 10 ms (CMC reads modules every 100 ms)Weight 28 g 33 gPart number M99-FI2-001 M99-FI4-001www.multicon24.eu15

MultiCon CMC I/O modulesInput modules - pulse flow or ratemetersFT2: 2 isolated pulse flow or ratemeters+ 2 current inputsFT4: 4 isolated pulse flow or ratemeters+ 4 current inputsFT4The FT modules have been especially designed for the MultiCon units used inflow or rate measurement applications. They allow user to display and recordboth actual flow (rate) and total flow (volume). These modules have extra 2or 4 analogue inputs for general purpose use. Each pulse channel is equippedwith counting inputs: Inp[n]1, Inp[n]2 and common ground COM[n]. Allpulse channels are galvanically separated from the device and fromthemselves. The general purpose use current inputs have common groundand they are isolated from the supply voltage and other modules.FT2 and FT4 modules can be used also as high speed quadrature counters.FT2Pulse flow or ratemeters parameters are:- Name - read-only input name given by the device,- Unit - read-only field which displays the time base of the measurement,- Base unit - defines unit which is used by the totalizer (for example when flowmeasurement unit is m3/s, the base unit is „m3”) ,- Mode - defines the time base which is used during the measurement (pulses persecond, pulses per minute, pulses per hour),- Low limit - value which determines amount of pulses, below which in logicalchannel „Lo” state will be displayed,- High limit - value which determines amount of pulses, above which in logicalchannel „Hi” state will be displayed,- Counting mode - defines how the device should interpret signals on pulse inputs,it has the following options: with direction input, quad 1, quad 4,- Filter - defines maximal frequency (with 50% duty cycle) the device will measure,options: disable, 10 Hz, 25 Hz, 50 Hz, 100 Hz, 1 kHz, 5 kHz, 10 kHz, 50 kHz,- Zero time - maximal awaiting time for the next pulse. If this time is exceeded thedevice will display 0 value; it has the following options: 0.1 sec., 1 sec., 10 sec.,- Balance - submenu which contains totalizer settings: Reset now; Reset mode;Reset source; Strobe mode; Strobe source; Counting direction; Direction source.TECHNICAL DATAMODULE PIN ASSIGNMENTFT22 pulse inputs+ 2 current inputsn01 Inp11n02 Inp12n03 COM1n04 Inp21n05 Inp22n06 COM2n07n08n09 GNDIN3IN42 x 0-20mAPin description:Inp[n]1, Inp[n]2 : datainputs for tachometer [n],COM[n] : COM fortachometer [n]FT 44 pulse inputs+ 4 current inputsn01 Inp11n02 Inp12n03 COM1n04 Inp21n05 Inp22n06 COM2n07 Inp31n08 Inp32n09 COM3n10 Inp41n11 Inp42n12 COM4IN5n13IN6n14n15IN7n16IN8n17GND4 x 0-20mAFT2FT4Number of inputs 2 x pulse flow or ratemeters (isolated) + 2 x current 4 x pulse flow or ratemeters (isolated) + 4 x currentMeasurement rangeHardware limitationflow / tacho input units: 1/sec, 1/min, 1/hcurrent input: 0 ÷ 20 mA, 4 ÷ 20 mAcurrent: -2 mA ÷ 30 mAflow / tacho input units: 1/sec, 1/min, 1/hcurrent input: 0 ÷ 20 mA, 4 ÷ 20 mAcurrent: -2 mA ÷ 30 mAHardware resolution current: 1 µA current: 1 µAPrecision 0.25% @ 25°C 0.25% @ 25°CInternal impedance current: typ. 100 Ω current: typ. 100 ΩMax input frequency flow / tacho: 50 kHz flow / tacho: 50 kHzProtection current: 50 mA, auto-reset fuse current: 50 mA, auto-reset fuseSampling period 10 ms (CMC reads modules every 100 ms) 10 ms (CMC reads modules every 100 ms)Weight 42 g 50 gPart number M99-FT2-001 M99-FT4-00116www.multicon24.eu

MultiCon CMC I/O modulesOutput modules - currentIO2: 2 current outputs, isolated, passiveIO4: 4 current outputs, isolated, passiveIO6: 6 current outputs, isolated, passiveIO8: 8 current outputs, isolated, passiveCurrent output modules are used to control other devices based on currentin industrial automation applications. These modules are equipped with 2, 4,6, 8 individually isolated (one from another) passive current outputs.MODULE PIN ASSIGNMENTIO2IO8IO22 current outputsIO44 current outputsn01n02PassiveOUT 4IO66 current outputsn01n02PassiveOUT 6IO88 current outputsn01n02PassiveOUT 8Current outputs parameters are:- Name - read-only output name given by the device,- Unit - current outputs have constant unit, „mA”,- Source - contains a logical channels list, where selectedone will be data source for current output,- Lower and Upper level (Input levels parameter block) -limits input signal range which is downloaded from Sourceparameter, below this range the input signal will be equalto Lower level and above this range the input signal willbe equal to Upper level,- Lower and Upper level (Output levels parameter block) -defines output signal changes range, below this range theoutput signal will be equal to Lower level and above thisrange output will be equal to Upper level. Therelationship between input and output levels is linear andlimited by defined range,- Alarm level - defines output value which appears whenSource parameter returns alarm state, but it can notexceeds the hardware limit. Alarm state is when a logicalchannel which is data source returns Err, Lo or Hi state.TECHNICAL DATAn05n06n07n08PassivePassiveOUT 2OUT 1n03n04n05n06n07n08PassivePassivePassiveOUT 3OUT 2OUT 1n03n04n05n06n07n08n09n10n11n12PassivePassivePassivePassivePassiveOUT 5OUT 4OUT 3OUT 2OUT 1n03n04n05n06n07n08n09n10n11n12PassivePassivePassivePassivePassiveOUT 7OUT6OUT 5OUT 4OUT 3IO2 IO4 IO6 IO8Number of outputs 2 (passive) 4 (passive) 6 (passive) 8 (passive)Nominal analogue range 4 ÷ 20 mA * 4 ÷ 20 mA * 4 ÷ 20 mA * 4 ÷ 20 mA *n13n14PassiveOUT 2Hardware output limitation 3 ÷ 22 mA 3 ÷ 22 mA 3 ÷ 22 mA 3 ÷ 22 mAOutput voltage dropout max. 9V max. 9V max. 9V max. 9VLoop supply range 9 ÷ 30V 9 ÷ 30V 9 ÷ 30V 9 ÷ 30Vn15n16PassiveOUT 1Overload protectionInternal resettable fuse50 mAInternal resettable fuse50 mAInternal resettable fuse50 mAInternal resettable fuse50 mAOutput current precision 0.1% @25°C, 50 ppm/°C 0.1% @25°C, 50 ppm/°C 0.1% @25°C, 50 ppm/°C 0.1% @25°C, 50 ppm/°CResolution 12 bit 12 bit 12 bit 12 bitInsulation strength 1 min @ 500V AC 1 min @ 500V AC 1 min @ 500V AC 1 min @ 500V ACWeight 23 g 30 g 38 g 53 gPart number M99-IO2-001 M99-IO4-001 M141-IO6-001 M141-IO8-001* CMC updates output value every 100 mswww.multicon24.eu17

MultiCon CMC I/O modulesOutput modules - SSRS8: 8 x SSR outputsS16: 16 x SSR outputsS24: 24 x SSR outputsThese modules are equipped with 8, 16 or 24 SSR outputs. May be used tocontrol executive device state in a simple on/off or PWM mode.MODULE PIN ASSIGNMENTS8Built-in outputs parameters in the PWM mode are:- Name - read-only output name given by the device,- Mode - this parameter allows the user to select method of the output operation,- Source - it contains the Logical channels list, the chosen one will be data sourcefor the relay,- Alarm level - allows the user to enter value at the output in times of alarm state,- Level - defines the source signal level at which the output switches the state(from low to high state or vice versa from high to low state), occurs for themode,- Lower level and Upper level - defines constant values on which depends relaystate switch (for Level mode: value), or allows to choose a logical channels fromthe list, which actual value will be data for relay state switch (for Level mode:channel),- Hysteresis - shifts relay levels with constant value, in the Relay operation mode,- On delay - time which elapses from the moment when source data meets therequirements for relay switch, to actual relay's switch to active state,- OFF delay - time which elapses from the moment when source data meets therequirement for relay switch, to actual relay's switch to passive state,- Min.ON time - minimal time when the relay is in the active state,- Min.OFF time - minimal time when the relay is in the passive state.TECHNICAL DATAS16S88 SSR outputsn01n02n03n04n05n06n07n08n09n10+10..24V DCGNDOUT1OUT2OUT3OUT4OUT5OUT6OUT7OUT8S1616 SSR outputsn01n02n03n04n05n06n07n08n09n10n11n12n13n14n15n16n17n18n19n20+10..24V DCGNDOUT1OUT2OUT3OUT4OUT5OUT6OUT7OUT8+10..24V DCGNDOUT9OUT10OUT11OUT12OUT13OUT14OUT15OUT16Pin description:1, 11, 21 : supply inputs for outputs1-8, 9-16 and 17-24 respectively (10-24V, max. 500 mA).10, 20, 30 : GND for outputs 1-8, 9-16and 17-24 (internally connected)2-9, 12-19, 21, 29 : SSR driver outputsS2424 SSR outputsn01n02n03n04n05n06n07n08n09n10n11n12n13n14n15n16n17n18n19n20n21n22n23n24n25n26n27n28n29n30+10..24V DCGNDOUT1OUT2OUT3OUT4OUT5OUT6OUT7OUT8+10..24V DCGNDOUT9OUT10OUT11OUT12OUT13OUT14OUT15OUT16+10..24V DCGNDOUT9OUT10OUT11OUT12OUT13OUT14OUT15OUT16S8 S16 S24Number of outputs 8 16 (in 2 groups with separate supply) 24 (in 3 groups with separate supply)Max. current sourceper outputpowered internally: 10 mA, sum limited to50 mA, powered externally: 100 mA, sumlimited to 500 mApowered internally: 10 mA, sum limited to powered internally: 10 mA, sum limited to50 mA for a group, powered externally: 50 mA for a group, powered externally:100 mA, sum limited to 500 mA for a group 100 mA, sum limited to 500 mA for a groupOutput method relay modes or PWM mode * relay modes or PWM mode * relay modes or PWM mode *Output High Levelvoltagepowered internally: ≥8Vpowered externally: ≥(Vext. - 0.5V)powered internally: ≥8Vpowered externally: ≥(Vext. - 0.5V)powered internally: ≥8Vpowered externally: ≥(Vext. - 0.5V)Overload protectionpowered internally: internal fuse 50 mA,powered externally: internal fuse 500 mApowered internally: internal fuse 50 mA(per group), powered externally: internalfuse 500 mA (per group)powered internally: internal fuse 50 mA(per group), powered externally: internalfuse 500 mA (per group)External output supply 30 V max. 30 V max. 30 VInsulation strength 1 min @ 500V AC 1 min @ 500V AC 1 min @ 500V ACWeight 32 g 42 g 69 gPart number M99-S8-001 M99-S16-001 M141-S24-00118* CMC updates output state every 100 mswww.multicon24.eu

MultiCon CMC I/O modulesOutput modules - relayR45: 4 x 5A/250V relay outputsR65: 6 x 5A/250V relay outputsR81: 8 x 1A/250V relay outputsR121: 12 x 1A/250V relay outputsThe modules with relay outputs are used to switch on and off executivedevice circuits in the automatics. These modules are equipped with 4, 6, 8 or12 relay outputs.R81MODULE PIN ASSIGNMENTR454 x 5A/250Vrelay outputsR656 x 5A/250Vrelay outputsR818 x 1A/250Vrelay outputsR12112 x 1A/250Vrelay outputsR45Relay parameters are:- Name - read-only output name given by the device,- Mode - read-only field which allows to choose, how the relayreacts on the source signal (Source parameter),- Source - it contains the Logical channels list, the chosen one willbe data source for the relay,- Alarm state - allows to choose relay's respond for alarm state.Alarm state is when in logical channel, which is data source forthe relay, returns -Err-, -Lo- or -Hi-,- Level mode - allows to choose, where the data is coming from forLevel, Lower level and Upper level parameter: value, channel,- Level - defines constant signal level, exceeding which causes relaystate switch, or allows to choose a Logical channel, which actualvalue data is for relay state switch Level,- Lower level and Upper level - defines constant values whichdepends on relay state switch, or allows to choose a logicalchannels from the list, which actual value data is for relay stateswitch,- Hysteresis - shifts relay levels with constant value,- On delay - time which elapses from the moment when sourcedata meets the requirements for relay switch,- OFF delay - time which elapses from the moment when sourcedata meets the requirement for relay switch,- Min.ON time - minimal time when the relay is in the active state,- Min.OFF time - minimal time when the relay is in the passivestate.TECHNICAL DATAn01n02n03n04n05n06n07n08n09n10n11n12OUT1OUT2OUT3OUT4n01n02n03n04n05n06n07n08n09n10n11n12n13n14n15n16n17n18OUT1OUT2OUT3OUT4OUT5OUT6n01n02n03n04n05n06n07n08n09n10n11n12n13n14OUT1OUT2OUT3OUT4OUT5OUT6OUT7OUT8n01n02n03n04n05n06n07n08n09n10n11n12n13n14n15n16n17n18n19n20n21OUT1OUT2OUT3OUT4OUT5OUT6OUT7OUT8OUT9OUT10OUT11OUT12R45 R65 R81 R121Number of relays 4 SPDP (Switchable) 6 SPDP (Switchable) 8 SPST (N.O.) 12 SPST (N.O.)Max. load per relay 5A, cos φ = 1 (resistive load) 5A, cos φ = 1 (resistive load) 1A, cos φ = 1 (resistive load) 1A, cos φ = 1 (resistive load)Output operation method *disabled, above level, belowlevel, inside range, outsiderangedisabled, above level, belowlevel, inside range, outsiderangedisabled, above level, belowlevel, inside range, outsiderangedisabled, above level, belowlevel, inside range, outsiderangeMax. voltage switched by relay 250V AC 250V AC 250V AC 250V ACInsulation strength ≤1000V AC @ 60 sec. ≤1000V AC @ 60 sec. ≤1000V AC @ 60 sec. ≤1000V AC @ 60 sec.Weight 50 g 133 g 74 g 110 gPart number M99-R45-001 M141-R65-001 M99-R81-001 M141-R121-001* CMC updates output state every 100 mswww.multicon24.eu19

MultiCon CMC I/O modulesCommunication modulesETU: Ethernet + USBACM: advanced communication moduleUSB HostACMMODULE PIN ASSIGNMENTETUETU communication module contains:- Ethernet port, used for connection of the MultiCon CMC with anotherdevices or systems via LAN or WAN,- USB port, used for connection of the external devices such as PC mouse,keyboard or USB flash drive.Advanced communication module (ACM) contains:- Ethernet port, used for connection of the MultiCon CMC with anotherdevices or systems via LAN or WAN,- USB port, used for connection of the external devices such as PC mouse,keyboard or USB flash drive,- additional RS-485 port and RS-232 port shared with third RS-485 port,used for communication with other devices using Modbus RTU protocol.isolatedisolatedRS-485 (2)RS-232 + RS-485 (3)9 GND10 B-11 A+12 GND13 B-1415A+GND161718RxDTxDCTS19 RTSUSBhostRJ-45ETHTECHNICAL DATAPin description:9 : ground for RS-48510, 11 : data inputs for RS-48512 : ground for RS-23213 ÷ 19 : data inputs compatiblewith RS-232 standardUSB (back - host only)Port used for connection of the external devices such as PC mouse,keyboard or USB flash drive,available in standardMASTER/SLAVEdeviceGNDB-A+Port MB1Multicon is SLAVE device for this networkMulticon is disabled for this networkMulticon is SLAVE device for this networkMulticon is MASTER device for this network128Power supply(depending on version)SERVICE3GND45 67+24V DC ±5% (Imax. = 200mA)GNDB-A+Slot D- ACM module9GNDPort MB2 10B-11 A+12Port MB3digital input0/15..24V DCRS-485insulatedRS-485 (2)RS-232 + RS-485 (3)GND1314B-A+15GND16RxD17TxD18CTS19RTSUSBhostRJ-45ETHPort MB4GNDB-MASTER/ SLAVESLAVEA+ device deviceMASTERdeviceETU ACM USB (back)Number of inputs/outputs 2 4 1Input/output type USB Host, RJ-45 ETH RS-485, RS-232+RS-485, USB Host, RJ-45 ETH USB hostHardware output limitation USB host: max current output 100 mA USB host: max current output 100 mA current output 100 mA max.BaudrateRJ-45 ETH: 10 Mb/sec.USB host: 12 Mb/sec.RS-485 [bit./sec.]: 1200, 2400, 4800, 9600, 19200,38400, 57600, 115200RJ-45 ETH: 10 Mb/sec.USB host: 12 Mb/sec.12 Mb/sec.Data format - RS-232/485: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2 -Weight 43,5 g 48 g 21 gPart number M99-ETU-001 M99-ACM-001 M99-USB-00120 www.multicon24.eu