INPUT / OUTPUT / POWER SUPPLY / COMMUNICATION modules
INPUT / OUTPUT / POWER SUPPLY / COMMUNICATION modules
INPUT / OUTPUT / POWER SUPPLY / COMMUNICATION modules
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MultiCon CMC I/O <strong>modules</strong>Communication <strong>modules</strong>ETU: Ethernet + USBACM: advanced communication moduleUSB HostACMMODULE PIN ASSIGNMENTETUETU communication module contains:- Ethernet port, used for connection of the MultiCon CMC with anotherdevices or systems via LAN or WAN,- USB port, used for connection of the external devices such as PC mouse,keyboard or USB flash drive.Advanced communication module (ACM) contains:- Ethernet port, used for connection of the MultiCon CMC with anotherdevices or systems via LAN or WAN,- USB port, used for connection of the external devices such as PC mouse,keyboard or USB flash drive,- additional RS-485 port and RS-232 port shared with third RS-485 port,used for communication with other devices using Modbus RTU protocol.isolatedisolatedRS-485 (2)RS-232 + RS-485 (3)9 GND10 B-11 A+12 GND13 B-1415A+GND161718RxDTxDCTS19 RTSUSBhostRJ-45ETHTECHNICAL DATAPin description:9 : ground for RS-48510, 11 : data inputs for RS-48512 : ground for RS-23213 ÷ 19 : data inputs compatiblewith RS-232 standardUSB (back - host only)Port used for connection of the external devices such as PC mouse,keyboard or USB flash drive,available in standardMASTER/SLAVEdeviceGNDB-A+Port MB1Multicon is SLAVE device for this networkMulticon is disabled for this networkMulticon is SLAVE device for this networkMulticon is MASTER device for this network128Power supply(depending on version)SERVICE3GND45 67+24V DC ±5% (Imax. = 200mA)GNDB-A+Slot D- ACM module9GNDPort MB2 10B-11 A+12Port MB3digital input0/15..24V DCRS-485insulatedRS-485 (2)RS-232 + RS-485 (3)GND1314B-A+15GND16RxD17TxD18CTS19RTSUSBhostRJ-45ETHPort MB4GNDB-MASTER/ SLAVESLAVEA+ device deviceMASTERdeviceETU ACM USB (back)Number of inputs/outputs 2 4 1Input/output type USB Host, RJ-45 ETH RS-485, RS-232+RS-485, USB Host, RJ-45 ETH USB hostHardware output limitation USB host: max current output 100 mA USB host: max current output 100 mA current output 100 mA max.BaudrateRJ-45 ETH: 10 Mb/sec.USB host: 12 Mb/sec.RS-485 [bit./sec.]: 1200, 2400, 4800, 9600, 19200,38400, 57600, 115200RJ-45 ETH: 10 Mb/sec.USB host: 12 Mb/sec.12 Mb/sec.Data format - RS-232/485: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2 -Weight 43,5 g 48 g 21 gPart number M99-ETU-001 M99-ACM-001 M99-USB-00120 www.multicon24.eu