Annexure A

More documents

Recommendations

Info

SCHEDULE OF WORKN/W: ARMO various Electrical Installation & Mechanical equipments in Attar Sain Jain Hospital &C.F.D.L., Lawrence Road, Delhi, Keshav Mahavidyalaya, Pitampura, Delhi and District Jail -Rohini, Delhi (SH: RMO A.C. Services -Running Maintenance of Window/Split type AC's andWater coolers)S.no. Description of Items Qty. Rate Unit Amount1) To attend day to day complaints for Window/Split Airconditionersand water coolers installed at abovebuildings by deploying following staff on all days ofthe month (Approx. 100 Nos.).Staff Required:-(a) A.C. Mechanic (9.00 AM to 5.00 PM) - 1 No.(b) Helper (9.00 AM to 5.00 PM) - 1 No. 6 P/Mmonths2) Servicing, overhauling of 1.5 / 2 TR WTAC / Splittype AC / Water cooler i/c cleaning of condenser,evaporator of machine with veniclin chemical, oiling,greasing of motor complete i/c refixing, testing andcommissioning in all respect as required. 100 nos. each3) Supplying and charging of R-22 refrigerant gas in1.5/2 TR capacity WTAC/Split AC unit/Water cooleri/c Pressure testing with Nitrogen complete as required. 15 nos. eachTotalRs.Terms & Conditions :-1) The work shall be carried out as per CPWDspecifications2) No T & P will be issued to the contractor.3) Nothing extra will be paid on account of cartage etc.4) All the dismantled material should be handed over toJE(E)5) Contractor has to complete the Item no.2 within onemonth & item no. 3 will be as and when reqd. basiswithin 6 months6) The complaint received on telephone should beattended within 24 hours.7) Recovery shall be made @ Rs.600/- per complaint perday, if the complaint is not attended within 24 hoursfrom the lodging of the complaint. AE(E) M-3521
SPECIFICATION AND SPECIAL CONDITIONS1. Work shall be carried out as per CPWD specifications for electrical works 2005, for internal F.1 CPWDspecification and 1995 for external services and the Indian Electricity Rule-1956 as amended upto date forsuch works.2. All the materials, whatsoever, to be supplied and provided by the contractor should be of standard andapproved quality. These should be got approved from the Engineer-in-Charge or his authorizedrepresentative before installation. No payment will be made for any unapproved or sub standard/rejectedmaterials used on the work. Rejected material should be removed from the site of work within 48 hoursfailing which the same will be liable for removal by the department at the risk and cost of contractorwithout any liability.3. The electric work shall be done in closed co-ordination and in phase, strictly with civil works whereverthese are in control of this office no claim for idle labour shall be entertained under this agreement.4. Any damage done to the building while executing the electric work should be made good to thesatisfaction of the department. The chases, holes etc. cut in the walls and roofs should be filled within twodays. All marlba should be removed on the same day. In case of failure to do so it will be got done by theEngineer-in-Charge or his authorized representative at contractor’s risk and cost.5. All watch and ward of the materials installed at work will be responsibility of the contractors till theirhanding over to the department on completion of work. Merely recording of measurement and runningpayments made to the contractor. There will be regular handing over/taking over the installation. Anymissing item shall have to be made good by the contractor.6. Contractor shall submit neatly prepare electric inventory of fittings provided along with completion plan intriplicate (one of them on tracing cloth) and also test report of the electrical installation failing whichnecessary recovery will be affected.7. Laying of the conduit, position of switches, fittings and cable routes etc. should be got approved by theEngineer-in-Charge or his authorized representative. It will be in the interest of the contractor to mark theabove layout at site and get it approved before actual execution of the work otherwise it will be acceptedand the contractor will have to get it redone for which no extra payment will be made.8. Persons executing electrical work should have electrical license as required under I.E. Act.9. The earthing shall invariably be done in presence of the AE/JE incharge of the work.10. All interconnections in the switch boards shall be carried out with suitable cables commensurate with thecurrent carrying capacity.11. The sub-main and circuit wiring stipulated or otherwise on linear basis will be measured and paid from endto end of conduit. No extra payment will be made for loose wiring for connections. Sufficient length ofwire is, however, to be left as per directions of Engineer-in-Charge or his authorized representative forconnections etc.12. All I.C. switches and DBs wherever required will be numbered and marked with paint and nothing will bepaid on this account.13. All I.C. Boxes and junction boxes should be cleared and cleaned properly and painted form before wiringand fixing the accessories.14. Wherever wooden battens are provided inside the C.I. Box, for fixing accessories, these should be paintedwith single coat of paint/varnish and fixed security by means of machine screws to C.I. Box which willhave the threads for machine screws.
Page 1 and 2: Annexure AThe Assistant Engineer(E)
Page 3 and 4: Tenderers are advised to inspect an
Page 5 and 6: SCHEDULESSCHEDULE 'A'Schedule of Qu
Page 7: Clause 42i) (a) Schedule/statement
Page 11: LIST OF APPROVED MAKES1. PVC insula

Annexure A

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?