Alspa C80-35 24 Vdc Input, Neg/Pos Logic, 1 ms ... - GE Fanuc PLC

RevisionsIndex letter Date Nature of revisionb September 1995 Changes made to this manual reflect the features of Release 5 (October1994) of Alspa P8–25/35/05 software for Alspa C80–35 PLCs,Alspa C80–25 PLCs, and Alspa C80–05 Micro PLCs. Additionally,corrections have been made where necessary. The following list describesthe major revisions of this manual, as compared to the previousversion (ALS 52102 a):This manual includes software-related information about therecently released Model 351 CPU, such as sweep impact (referto chapter 2) and timing information (refer to appendix A). Foradditional information about the 351 CPU, refer to the ALS 52117Alspa C80–35 PLC Installation Manual and the IPI that comeswith the CPU.There is a new Alspa 8000 Micro PLC, Model CE693UDR005,discussed briefly in chapter 2. This Micro PLC has 28 DC inputsand 28 relay outputs. For more information about ModelCE693UDD005, refer to the ALS 52119 Alspa C80–05 MicroPLC User’s Manual.In our effort to improve the quality of Alspa P8 documentation,there are clarifications and corrections in several places withinthis manual. In addition to minor clarifications, we reorganizedand improved the paragraph on Communication Requestsbeginning on page 4–72.c June 1997 Release 7 for software and CPUMath functions, chapter 4 (trigo, logarithmic, exponentical,radian), Real functions (floating point only CPU 352) chapter 4. Key switch function, chapter 2.ALS 52102 c–en Alspa C80–35, C80–25 and C80–05 PLCs Reference ManualPage 3