real-time image capturing system for car plate recognition

More documents

Recommendations

Info

22Figure 3.3 Hardware overview of Basler IP camera [16]Figure 3.4 Connection between camera and PoE injector [16]CS-mount lens adapter provides a point to mount a CS-mount lens or a C-mount lens on camera (a 5mm extension tube is required with a C-mount lens). PJ-45 network/PoE provides a 10/100 Ethernet connection and it can also use to connectPower over Ethernet (IEEE 802.3af) to the camera. PoE injector is a medium thatallow the connection between IP camera and network switch in the Intel desktopboard [16].The installation step of Basler IP camera as following: Firstly, the camera andappropriate lens are taken to a clean environment. It is better if the environment asdust free as possible. The cap from the lens adapter on the front of the camera isremoved. CS-mount lens is screwed carefully into adapter. In order to turn on autoirisfunction, the cable on the lens is connected to DC-iris control connector on theside of camera. Then, the camera is connected to an Out-port of PoE injector. Thepower source on PoE injector is turned on in order to supply power to IP camera. An
23Ethernet patch cable is connected between In-port and the network switch of the Inteldesktop board [16].3.1.2 Intel Desktop Board D525MWFigure 3.5 Hardware overview of Intel desktop board D525MWFigure 3.5 shows Intel desktop board D525MW. It consists of Intel Atom TMprocessor D525 which supports the two chips layout. This chipset can reduce thepackage of power footprint by 70 percent, better heat flow and enabling easierrouting. The Ethernet patch cable is connected to integrated 10/100/1000 networkport. Through this network port, it allows the hardware accelerated video encodingand decoding. All the real-time image capturing will be done in the Intel atomprocessor. Besides that, the desktop board is connected with Kingston 2GB randomaccess memory (RAM), hard disk, keyboard and also eSo-nic switching powersupply which can provide 500W with 50Hz frequency. The port of video graphicarray (VGA) is connected with VGA connector to a monitor.
Page 4 and 5: REAL-TIME IMAGE CAPTURING SYSTEM FO
Page 6 and 7: iiiSpecially to my beloved grandfat
Page 8 and 9: vABSTRACTCar Plate Recognition Syst
Page 10 and 11: viiTABLE OF CONTENTSCHAPTER TITLE P
Page 12 and 13: ix5 CONCLUSION AND RECOMMENDATION 4
Page 14 and 15: xiLIST OF FIGURESFIGURE NO. TITLE P
Page 16 and 17: xiiiLIST OF APPENDICESAPPENDIX TITL
Page 18 and 19: 2the real-time video capture and re
Page 20 and 21: 4application as received by the mot
Page 22 and 23: CHAPTER 2LITERATURE REVIEWCar Plate
Page 24 and 25: 8looking camera so that it can capt
Page 26 and 27: 102.4 Type of License Plate Capture
Page 28 and 29: 12There are two types of IP camera
Page 30 and 31: 14a. IP camera is setup in the targ
Page 32 and 33: 16computer over the IP network for
Page 34 and 35: 18player will read variable ‘img
Page 36 and 37: CHAPTER 3METHODOLOGYIn this project
Page 40 and 41: 243.1.3 MonitorFigure 3.6 MonitorFi
Page 42 and 43: 26Start1. Display welcome header2.
Page 44 and 45: 28StartDisplay welcome to Live Stre
Page 46 and 47: 30StartDisplay welcome to Offline V
Page 48 and 49: 32Figure 4.1 Overview of hardware i
Page 50 and 51: 344.2 Application Functionality Tes
Page 52 and 53: 36Figure 4.7 Camera undetected scre
Page 54 and 55: 38Figure 4.10 Live video timer and
Page 56 and 57: 40Figure 4.11(b) Images captured fr
Page 58 and 59: 42Then, the user can insert capture
Page 60 and 61: 44Figure 4.15(b) Images captured fr
Page 62 and 63: 46b. There is no license plate atta
Page 64 and 65: CHAPTER 5CONCLUSION AND RECOMMENDAT
Page 66 and 67: 50REFERENCES1. Toral, S.L., E.S. In
Page 68 and 69: 52APPENDIX AProject Gantt ChartNoTa
Page 70 and 71: 54APPENDIX BSource Code of Develope
Page 72 and 73: 56if (frame){imgColor = frame;// ob
Page 74: 58// save imagecvSaveImage(buffer,

real-time image capturing system for car plate recognition

Create successful ePaper yourself

Delete template?

Save as template?